BS EN 50290-2-29-2016 Communication cables Common design rules and construction Crosslinked polyethylene insulation compounds instrumentation control and field bus cables《通信电缆 通用设计.pdf

《BS EN 50290-2-29-2016 Communication cables Common design rules and construction Crosslinked polyethylene insulation compounds instrumentation control and field bus cables《通信电缆 通用设计.pdf》由会员分享，可在线阅读，更多相关《BS EN 50290-2-29-2016 Communication cables Common design rules and construction Crosslinked polyethylene insulation compounds instrumentation control and field bus cables《通信电缆 通用设计.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 50290-2-29:2016Communication cablesPart 2-29: Common design rules andconstruction Crosslinked polyethyleneinsulation compounds: instrumentation,control and field bus cablesBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 50290-2-29:2016 BRITISH STANDARDNat

2、ional forewordThis British Standard is the UK implementation of EN 50290-2-29:2016. It supersedes BS EN 50290-2-29:2002 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories fo

3、r communication and signalling.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Instituti

4、on 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 93152 9 ICS 29.035.20; 33.120.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2016.

5、Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 50290-2-29:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50290-2-29 September 2016 ICS 29.035.20; 33.120.10 Supersedes EN 50290-2-29:2002 English Version Communication cables - Part 2-29: Common design rules a

6、nd construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables Cbles de communication - Partie 2-29: Rgles de conception communes et construction - PE rticul pour enveloppes isolantes Kommunikationskabel - Teil 2-29: Gemeinsame Regeln fr Entwicklung un

7、d Konstruktion - Vernetzte PE-Isolier-Mischungen This European Standard was approved by CENELEC on 2016-07-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any

8、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other lang

9、uage made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the

10、 Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Unite

11、d Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means re

12、served worldwide for CENELEC Members. Ref. No. EN 50290-2-29:2016 E BS EN 50290-2-29:2016EN 50290-2-29:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references . 4 3 Compound test requirements . 5 4 Cable test requirements . 5 5 Health, Safety and Environmental Regulations . 5

13、 Bibliography . 9 BS EN 50290-2-29:2016 3 European foreword This document (EN 50290-2-29:2016) has been prepared by a joint working group of the Technical Committees CENELEC TC 46X, “Communication cables“, and CENELEC TC 86A, “Optical fibres and optical fibre cables“. The following dates are fixed:

14、latest date by which this document hasto be implemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2017-07-22 latest date by which the nationalstandards conflicting with thisdocument have to be withdrawn(dow) 2019-07-22 Attention is drawn to the possibili

15、ty that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 50290-2-29:2002. EN 50290-2-29:2016 (E) BS EN 50290-2-29:2016EN 50290-2-29:2016 (E) 4 1 Scope

16、 This Part 2-29 of EN 50290 gives specific requirements for Crosslinked Polyethylene (XLPE) compounds to be used for the insulation of instrumentation, control and field bus cables. There are several routes used for manufacture of XLPE insulated cables and as a consequence a number of different type

17、s of polyethylene compound may be specified. The compounds required for the different manufacturing processes are described (Table 1). The unstabilised materials require antioxidant to be added during the cable extrusion process. Table 1 XLPE Materials Material Stabilisation Manufacturing process PE

18、 None Base polymer for irradiation/one step silane PE-S Yes Stabilised compound for irradiation/one step silane SXPE None Silane grafted compound or copolymer for two step process SXPE-S Yes Stabilised silane grafted compound or copolymer for two step process It is essential to read this European St

19、andard in conjunction with Part 2-20 of EN 50290, the product standards EN 50288-7 and EN 61158 and other applicable product standards. Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient data to demonstrate compliance and warrant that t

20、he material is suitable for the specified application. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest

21、edition of the referenced document (including any amendments) applies. EN 50288-7, Multi-element metallic cables used in analogue and digital communication and control Part 7: Sectional specification for instrumentation and control cables EN 60216 (all parts), Electrical insulating materials Thermal

22、 endurance properties (IEC 60216) EN 60811-401, Electric and optical fibre cables Test methods for non-metallic materials Part 401: Miscellaneous tests Thermal ageing methods Ageing in an air oven (IEC 60811-401) EN 60811-501, Electric and optical fibre cables Test methods for non-metallic materials

23、 Part 501: Mechanical tests Tests for determining the mechanical properties of insulating and sheathing compounds (IEC 60811-501) EN 60811-502, Electric and optical fibre cables Test methods for non-metallic materials Part 502: Mechanical tests Shrinkage test for insulations (IEC 60811-502) EN 60811

24、-507, Electric and optical fibre cables Test methods for non-metallic materials Part 507: Mechanical tests Hot set test for cross-linked materials (IEC 60811-507) EN 60811-510, Electric and optical fibre cables Test methods for non-metallic materials Part 510: Mechanical tests Methods specific to po

25、lyethylene and polypropylene compounds Wrapping test after thermal ageing in air (IEC 60811-510) EN 61158 (all parts), Industrial communication networks Fieldbus specifications (IEC 61158) EN ISO 868, Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness)

26、 (ISO 868) BS EN 50290-2-29:2016EN 50290-2-29:2016 (E) 5 EN ISO 1133 (all parts), Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133) EN ISO 1183 (all parts), Plastics Methods for determining the density of non-cellular plastics (I

27、SO 1183) EN ISO 11357-6, Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6) ISO 6502, Rubber Guide to the use of curemeters ISO 974, Plastics Determination of the brittlen

28、ess temperature by impact 3 Compound test requirements The tests are to be carried out on granules or moulded plaques produced from granules of compound. This data shall be provided by the compound supplier. Relevant test methods, requirements and limits shall be included in any supply specification

29、 of the compound. Specific requirements are shown in Table 2. In the case of special applications, additional requirements could be specified. 4 Cable test requirements The anticipated performance assumes standard cable design and conventional process technology and is specified (Table 3). To achiev

30、e the indicated values, the addition of antioxidant and/or catalyst is necessary for materials PE, PES, SXPE & SXPES. Using type test data the compound supplier is expected to demonstrate compliance and warrant that the material is suitable for the specified application. In the case of special appli

31、cations, additional requirements could be specified. 5 Health, Safety and Environmental Regulations The compounds are subject to Health, Safety and Environmental requirements as defined in EN 50290-2-20. Any deviations or compliance failures must be identified by the compound supplier. BS EN 50290-2

32、-29:2016EN 50290-2-29:2016 (E) 6 Table 2 Insulation compounds - physical properties of granules CharacteristicsaTest method Unit Value Applicability 1 DensitybEN ISO 1183 g/cm3 0,950 All 2 Melt flow indexc(190C/2,16 kg) EN ISO 1133 g/10 min D PE, PE-S, SXPE & SXPE-S 3 Storage stability Retention of

33、melt flow index (190C/2,16 kg) after storage 1 month at 20C, RH 50% EN ISO 1133 % TBDcSXPE and SXPE-S 4 Elastograph ISO 6502 N*m 0,5cVXPE-S 5 Hardness Shore D (1s) EN ISO 868 - TBDdAll 6 Low temperature brittleness ISO 974 C TBD PE-S, SXPE-S & VXPE-S aAll values of Table 2 shall be provided by the c

34、ompound supplier, see Clause 3. bTolerance for the nominal value of a specific compound is +/- 0,003 g/cm. cTolerance for the nominal value of a specific compound is +/- 25%. dTolerance for the nominal value of a specific compound is +/- 3. eAlternative methods which correlate with the antioxidant c

35、ontent are permitted. BS EN 50290-2-29:2016 7 Table 3 Wire insulation properties Characteristics Test method Unit Values 1 Maximum rated temperature of cable for which the compound can be used EN 60216aC 90 2 2.1 2.1.1 2.1.2 2.2 2.2.1 2.2.2 2.2.3 Mechanical characteristics Before ageing Tensile stre

36、ngth- median,min. Elongation at break- median,min Mechanical characteristics after ageing Ageing conditions - Temperature - Duration Tensile strength - Median, minimum value Elongation at break - Median, minimum value Retention of Mechanical properties after ageingbEN 60811-501 EN 60811-401 and -501

37、 MPa % C H MPa % % 12,5 250 135 2 10 x 24 12,5 200 75 3 Wrapping after ageingc- temperature - duration Result to be obtained EN 60811-510 C h 150 2 7 x 24 No crack 4 4.1 4.1.1 4.1.2 4.2 4.2.1 4.2.2 4.2.3 Ageing test on complete cable (compatibility test) dBefore ageing Tensile strength- median,min.

38、Elongation at break- median,min. Mechanical characteristics after ageing Ageing conditions - Temperature - Duration Tensile strength - Median, minimum value Elongation at break - Median, minimum value Retention of Mechanical properties after ageingbEN 60811-501 EN 60811-401 and -501 MPa % C h MPa %

39、% 12,5 250 100 2 7 x 24 12,5 200 75 5 Hot set Test conditions - Temperature - Time under load - Mechanical stress Results to be obtained EN 60811-507 C min N/mm2200 2 15 0,2 EN 50290-2-29:2016 (E) BS EN 50290-2-29:2016EN 50290-2-29:2016 (E) 8 - Elongation under load, median, maximum - Elongation aft

40、er cooling, median, maximum % % 175 15 6 Shrinkage Test conditions - temperature - duration Result to be obtained, median, max. EN 60811-502 C h % 130 2 1 4 aAny procedure based on the Arrhenius principals which can predict 20 000 h life expectancy at the indicated temperature. bIn cases where the s

41、pecified limit is not achieved, the initial mechanical properties (2.1 and 4.1) shall be measured after conditioning of new samples for 24 h at the specified ageing temperature. Additional testing of aged samples is not needed. cOnly to be carried out if elongation at break cannot be done dOnly to b

42、e carried out for cables where the insulation is in direct contact with material (eg. sheath or bedding) containing oils, plasticisers or other extenders which could migrate into the insulation BS EN 50290-2-29:2016 9 Bibliography ASTM D 2084, Standard Test Method for Rubber Property-Vulcanization U

43、sing Oscillating Disk Cure Meter EN 50290-2-29:2016 (E)This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. Briti

44、sh Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The kn

45、owledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge t

46、hat your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international s

47、tandards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, incl

48、uding British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions belo

49、w, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company