BS EN 16865-2016 Inland navigation vessels Connections and assembled hoses for the transfer of potable water《内河航行用船舶 饮用水输送连接和组装软管》.pdf

《BS EN 16865-2016 Inland navigation vessels Connections and assembled hoses for the transfer of potable water《内河航行用船舶 饮用水输送连接和组装软管》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16865-2016 Inland navigation vessels Connections and assembled hoses for the transfer of potable water《内河航行用船舶 饮用水输送连接和组装软管》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 16865:2016Inland navigation vessels Connections and assembledhoses for the transfer ofpotable waterBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 16865:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16865:2016.

2、The UK participation in its preparation was entrusted to TechnicalCommittee SME/32, Ships and marine technology - Steeringcommittee.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovision

3、s of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 89843 3ICS 47.020.30; 47.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was publis

4、hed under the authority of theStandards Policy and Strategy Committee on 31 October 2016.Amendments issued since publicationDate Text affectedBS EN 16865:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16865 October 2016 ICS 47.020.30; 47.060 English Version Inland navigation vessels - Conn

5、ections and assembled hoses for the transfer of potable water Bateaux de navigation intrieure - Raccords et tuyaux flexibles pour le ravitaillement en eau potable Fahrzeuge der Binnenschifffahrt - Anschlsse und Schlauchleitungen fr das Bunkern von Trinkwasser This European Standard was approved by C

6、EN on 12 June 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

7、may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notifie

8、d to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela

9、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Managem

10、ent Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16865:2016 EBS EN 16865:2016EN 16865:2016 (E) 2 Contents Page European foreword . 4 Introduction . 5 1 Scope . 6 2 Normative referen

11、ces . 6 3 Terms and definitions 6 4 Technical requirements 7 4.1 General information . 7 4.2 Components . 7 4.2.1 General information . 7 4.2.2 Fixed connection 9 4.2.3 Pipe connector . 10 4.2.4 Dummy coupling . 11 4.2.5 Pipe . 11 4.2.6 Retrofitting connection . 11 4.3 Dimensions 13 4.4 Connection c

12、onfiguration 13 5 Materials 14 5.1 General information 14 5.2 Pipe with thread connection and connector . 14 5.3 Pipe . 14 6 Instructions for use 14 7 Description 14 7.1 Supply side connection for storing potable water 14 7.2 Pipeline for storing potable water . 14 7.3 Consumer side connection for s

13、toring potable water . 14 7.4 Retrofitting connection . 15 8 Labelling . 15 8.1 Pipe . 15 8.2 Connection for storing potable water . 15 Bibliography . 16 Figures Figure 1 Overview of potable water transfer, here the example has a fixed connection on the supply side, a pipeline and a fixed coupling o

14、n the consumer side 8 Figure 2 Overview of potable water transfer, here the example has a fixed pipeline connected on the supply side and a retrofitting coupling on the consumer side 9 Figure 3 Fixed connection 10 Figure 4 Pipe connection 11 Figure 5 Retrofitting connection . 12 Figure 6 Plate for l

15、abelling the potable water connection . 15 BS EN 16865:2016EN 16865:2016 (E) 3 Tables Table 1 Parts list 13 Table 2 Dimensions for reducing couplings or brackets (item 9) . 13 BS EN 16865:2016EN 16865:2016 (E) 4 European foreword This document (EN 16865:2016) has been prepared by Technical Committee

16、 CEN/TC 15, “Inland navigation vessels“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, by April 2017 at the latest, and any conflicting national standards shall be withdr

17、awn by April 2017 at the latest. It should be noted that some elements of this document may be subject to patent rights. CEN and/or CENELEC shall not be responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organisations

18、of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Ne

19、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16865:2016EN 16865:2016 (E) 5 Introduction This European standard has been developed to specify hygienically perfect, standard pipelines and connections for the transfer

20、 and receipt of potable water on the supply side (bunker boats, onshore plant or similar) and the consumer side (inland navigation vessel). The connection consists of a pipe, a rapid coupling device both on the supply and consumer side with appropriate dummy couplings. This will allow simple handlin

21、g and secure transfer of potable water. Using this standard will prevent unsuitable pipes being used on the supply side and dirt getting into the potable water bunker on the consumer side by using pipes without couplings in openings that are level with the deck. Dirt, micro-organisms and insects are

22、 prevented from penetrating by using dummy couplings on both sides. BS EN 16865:2016EN 16865:2016 (E) 6 1 Scope This European standard specifies the design, dimensions and technical requirements for connections and pipelines for storing potable water for inland navigation vessels. These are: a fixed

23、 connection on the supply side; pipeline; a fixed connection on the consumer side; a connection for retrofitting inland navigation vessels that have a closure device level with the deck (internal pipe thread pursuant to EN ISO 228-1), consisting of a connecting part with a threaded connection and fi

24、xed coupling. Necessary measures to prevent electrostatic charge and overfilling are not governed by the standard. National regulations apply to drinking water supply plants. The requirements of this European standard supplement these regulations. 2 Normative references The following documents cited

25、 in whole or in part in this document are required for the application of this document. For dated references, only the edition referred to applies. For undated references, the latest version of the document referred to applies (including all amendments). DIN 14302, PN 16 aluminium alloy C pressure

26、coupling DIN 14307-1, PN 16 aluminium alloy C fixed coupling with sealing ring for pressure operation DIN 14311, PN 16 aluminium alloy C dummy coupling for pressure and suction operation EN 10220, Seamless and welded steel tubes Dimensions and masses per unit length EN 22768-1, General Tolerances Pa

27、rt 1: Tolerences for linear and angular dimensions without records of individual tolerances (ISO 2768-1:1989) EN ISO 228-1, Pipe threads where pressure-tight connections are not made on the thread Part 1: Dimensions, tolerances and designations (ISO 228-1) EN ISO 9093-1, Small craft Seacocks and thr

28、ough-hull fittings Part 1: Metallic parts (ISO 9093-1) ISO 14726, Ships and marine technology Identification colours for the content of piping systems 3 Terms and definitions The following terms apply to the application of this document. BS EN 16865:2016EN 16865:2016 (E) 7 3.1 potable water Water fo

29、r human consumption as specified in Council Directive 98/83/EG (see 8) SOURCE: EN 13443-2:2005+A1:2007, 3.12 3.2 pipeline Pipe with a pipe connection on both sides or with a pipe connection on one side and a fixed connection on the other side 3.3 pipe connector Pipeline fitting consisting of a pipe

30、clamp, a pipe coupling and a dummy coupling 3.4 fixed connection A permanently installed fitting consisting of a threaded pipe connection, fixed coupling and dummy coupling 4 Technical requirements 4.1 General information General tolerances: ISO 2768 c The requirements relate to the design, dimensio

31、ns and configuration of the connections. 4.2 Components 4.2.1 General information The position of the connection and the dimensions and specifications as set out under Paragraph 4 - Paragraph 7 shall be observed for the connection. On the supply side, there are the following versions: Fixed connecti

32、on to connect a pipeline; Permanently connected pipeline. On the consumer side there are the following versions: Fixed connection; Retrofitting connection. The overviews in Figure 1 and Figure 2 provide examples of connections for storing potable water. BS EN 16865:2016EN 16865:2016 (E) 8 Key a Fixe

33、d connection on the supply side. b Pipeline. c Fixed connection on the consumer side. Figure 1 Overview of potable water transfer, here the example has a fixed connection on the supply side, a pipeline and a fixed coupling on the consumer side Key a Permanently connected pipeline on the supply side.

34、 b Retrofitting connector. BS EN 16865:2016EN 16865:2016 (E) 9 Figure 2 Overview of potable water transfer, here the example has a fixed pipeline connected on the supply side and a retrofitting coupling on the consumer side 4.2.2 Fixed connection 4.2.2.1 General information The fixed connection, see

35、 Figure 3, shall consist of a threaded pipe connection, a C coupling with dimensions as per DIN 14307-1 as a fixed coupling and a dummy coupling. 4.2.2.2 Fixed connection on the supply side The C coupling on the supply side, 4.2.2.1, shall be permanently connected to the threaded pipe connection. BS

36、 EN 16865:2016EN 16865:2016 (E) 10 4.2.2.3 Fixed connection on the consumer side The C coupling on the consumer side, 4.2.2.1, shall be permanently connected to a threaded pipe connection. The pipe shall be fitted with an ISO 228 G 2 A pipe thread 20 mm long (DN 50). The pipe connection shall be wel

37、ded firmly to the superstructure, the deck or the pipeline system and in such a way that its end is at least 300 mm above the deck. The C coupling shall be permanently attached to the pipe connection. Dimensions in millimetres Key Item no. see parts list Table 1 Figure 3 Fixed connection 4.2.3 Pipe

38、connector The pipe connector, see Figure 4, shall consist of a C coupling with dimensions as per DIN 14302, that is attached to the pipe by a pipe clamp as per 4.2.5 and a dummy coupling. BS EN 16865:2016EN 16865:2016 (E) 11 Key Item no. see parts list Table 1 Figure 4 Pipe connection 4.2.4 Dummy co

39、upling Each fixed and pipe coupling shall be fitted with a dummy coupling with dimensions as per DIN 14311 that shall be attached to the relevant coupling so that it cannot be detached, e.g. with a chain and an S hook. It shall be possible to lock dummy couplings that are not secured against unautho

40、rised access in the closed position. 4.2.5 Pipe The pipe shall meet the requirements set out in 5.3. 4.2.6 Retrofitting connection The fixed coupling on the consumer side on inland navigation vessels that have a screw connection for receiving potable water shall be connected using a retrofitting con

41、nection, see Figure 5. The connection consists of: a C coupling with dimensions as per DIN 14307-1; a connecting part consisting of a pipe of at least 300 mm long with 20 mm long ISO 228 G 2 A pipe threads on both sides (DN 50); a dummy coupling if necessary, a reducing coupling or a reducing bracke

42、t. The connector shall be firmly welded or cemented to the screw connection. BS EN 16865:2016EN 16865:2016 (E) 12 Designs: Design A: No reducing coupling Deck closure complies with pipe thread ISO 228 G 2 A; Design B: With reducing coupling Deck closure does not comply with pipe thread ISO 228 G 2 A

43、; Design C: With reducing bracket for special connections, e.g. for connection running horizontally from the deck superstructure. Dimensions in millimetres Key Item no. see parts list Table 1 Figure 5 Retrofitting connection BS EN 16865:2016EN 16865:2016 (E) 13 Table 1 Parts list Item no. Designatio

44、n Picture Remarks 1 Pipe 4 See 4.2.5 2 Pipe clamp 4 As per EN ISO 9093-1 3 Pipe coupling 4 With dimensions as per DIN 14302 4 Dummy coupling 3, 4, 5 With dimensions as per DIN 14311 5 Undetachable connection 3, 4, 5 Connected permanently to items 3 and 4, e.g. with a chain and S hook. 6 Fixed coupli

45、ng 3, 5 With dimensions as per DIN 14307-1 7 Pipe with thread connection 3 Pipe thread ISO 228 G 2 A (l = 20 mm) Pipe as per EN 10220 or equivalent 8 Connector 5 Pipe thread on both sides ISO 228 G 2 A (l = 20 mm) Pipe as per EN 10220 or equivalent (l = 300 mm) 9 Reducing coupling or reducing bracke

46、t 5 Not required with a deck closure with a nominal width as per DN 50 4.3 Dimensions The nominal size for the coupling is 52 = C. Dimensions for reducing couplings or brackets are set out in Table 2. Table 2 Dimensions for reducing couplings or brackets (item 9) Nominal deck closure size Pipe threa

47、d as per EN ISO 228-1 D d1d20,2 0,4 h20 0,4 Reducing coupling DN mm mm mm mm 1 1/4 ISO 228 G 1 1/4 A 42,4 50 18 32 1 1/2 ISO 228 G 1 1/2 A 49,3 57 18 40 2 ISO 228 G 2 A 60,3 70 20 Not required 2 1/2 ISO 228 G 2 1/2 A 76,1 86 20 65 4.4 Connection configuration 4.4.1 The connection shall be easily acc

48、essible and the configuration shall allow a pipe with a bend radius of 500 mm to be easily connected. 4.4.2 The fixed coupling on the consumer side shall be attached to the pipe (item 7 or 8) in such a way that even when the connection is hidden, it is easy to attach the pipe coupling and lock it se

49、curely. There shall be enough space available for operating. BS EN 16865:2016EN 16865:2016 (E) 14 4.4.3 The connection shall be protected when it is installed so that no damage can occur during onboard operations and it shall not restrict passageways alongside it. 4.4.4 The fixed coupling shall be permanently connected to the ship, e.g. by cementing. The connector shall be permanently connected to the ship, e.g. by welding or cementing. 5 Materials 5.1 General informat