BS EN 15269-2-2012 Extended application of test results for fire resistance and or smoke control for door shutter and openable window assemblies including their elements of buildin .pdf

《BS EN 15269-2-2012 Extended application of test results for fire resistance and or smoke control for door shutter and openable window assemblies including their elements of buildin .pdf》由会员分享，可在线阅读，更多相关《BS EN 15269-2-2012 Extended application of test results for fire resistance and or smoke control for door shutter and openable window assemblies including their elements of buildin .pdf（106页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15269-2:2012Extended application of testresults for fire resistance and/or smoke control for door,shutter and openable windowassemblies, including theirelements of building

2、 hardwarePart 2: Fire resistance of hinged and pivotedsteel doorsetsBS EN 15269-2:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15269-2:2012.The UK participation in its preparation was entrusted to TechnicalCommittee FSH/22/-/5, Fire resistance tests for

3、doors.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI St

4、andardsLimited 2012ISBN 978 0 580 64316 3ICS 13.220.50; 91.060.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2012.Amendments issued since publicati

5、onDate Text affectedBS EN 15269-2:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15269-2 September 2012 ICS 13.220.50; 91.060.50 English Version Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their e

6、lements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets Application tendue des rsultats dessais en matire de rsistance au feu et/ou dtanchit la fume des blocs-portes, blocs-fermetures et fentres, y compris leurs lments de quincaillerie - Partie 2: Rsistance au feu

7、 des blocs-portes battants et pivotants en acier Erweiterter Anwendungsbereich von Prfergebnissen zur Feuerwiderstandsfhigkeit und/oder Rauchdichtigkeit von Tren, Toren und Fenstern einschlielich ihrer Baubeschlge - Teil 2: Feuerwiderstandsfhigkeit von Drehflgeltren aus Stahl This European Standard

8、was approved by CEN on 20 July 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such na

9、tional standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own lan

10、guage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greec

11、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG M

12、anagement Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15269-2:2012: EBS EN 15269-2:2012EN 15269-2:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references

13、53 Terms and definitions .64 Determination of the field of extended application 64.1 General 64.2 How to use extended application rules in Annex A .64.3 Procedure for maximum field of extended application .74.4 Analysis of test results .85 Extended application report .86 Classification report 8Annex

14、 A (normative) Construction parameter variations .9Annex B (normative) Arrangements for doorsets incorporating side and / or over panels . 94Annex C (informative) Figures 101BS EN 15269-2:2012EN 15269-2:2012 (E) 3 Foreword This document (EN 15269-2:2012) has been prepared by Technical Committee CEN/

15、TC 127 “Fire safety in buildings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2013, and conflicting national standards shall be withdrawn at the

16、 latest by March 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by

17、 the European Commission and the European Free Trade Association. EN 15269, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware, consists of the following parts: Part 1: General

18、requirements Part 2: Fire resistance of hinged and pivoted steel doorsets (the present document) Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows Part 5: Fire resistance of hinged and pivoted, metal framed, glazed doorsets and openable windows1) Part 6

19、: Fire resistance of sliding timber doorsets1) Part 7: Fire resistance of sliding steel doorsets Part 10: Fire resistance of steel rolling shutter assemblies Part 11: Fire resistance of operable fabric curtains1) Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doo

20、rsets According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Franc

21、e, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 1) In preparation. BS EN 15269-2:2012EN 15269-2:2012 (E) 4 Introduction This docu

22、ment is one of a series of standards intended to be used for the purpose of producing an extended application report based on the evaluation of one or more fire resistance and/or smoke control tests. These European Standards may also be used to identify the best selection of test specimens required

23、to cover a wide range of product variations. Before there can be any consideration for extended application, the doorset will need to have been tested in accordance with EN 1634-1 to achieve a test result which could generate a classification in accordance with EN 13501-2 at least equal to the class

24、ification subsequently required from extended application considerations. BS EN 15269-2:2012EN 15269-2:2012 (E) 5 1 Scope This European Standard covers single and double leaf, hinged and pivoted, steel based doorsets. It prescribes the methodology for extending the application of test results obtain

25、ed from fire resistance test(s) conducted in accordance with EN 1634-1. Subject to the completion of the appropriate test or tests, the extended application may cover all or some of the following examples: integrity (E), integrity/radiation (EW) or integrity/insulation (EI1or EI2) classification; do

26、or leaf; ventilation grilles and/or louvres wall/ceiling fixed elements (frame/suspension system); glazing for door leaf, side, transom and flush over panels; items of building hardware; decorative finishes; intumescent, smoke, draught or acoustic seals; alternative supporting construction(s). 2 Nor

27、mative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments

28、) applies. EN 1363-1, Fire resistance tests Part 1: General requirements EN 1634-1, Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware Part 1: Fire resistance tests for doors, shutters and openable windows EN 1634-2, Fire resist

29、ance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware Part 2: Fire resistance characterisation test for elements of building hardware EN 13501-2, Fire classification of construction products and building elements Part 2: Classification using

30、data from fire resistance tests, excluding ventilation services EN 15254-4:2008+A1:2011, Extended application of results from fire resistance tests Non-loadbearing walls Part 4. Glazed constructions EN 15269-1:2010, Extended application of test results for fire resistance and/or smoke control for do

31、or, shutter and openable window assemblies, including their elements of building hardware Part 1: General requirements EN ISO 13943, Fire safety Vocabulary (ISO 13943) BS EN 15269-2:2012EN 15269-2:2012 (E) 6 3 Terms and definitions For the purposes of this document, the terms and definitions given i

32、n EN1363-1, EN ISO 13943, EN 1634-1, EN 1634-2 and EN 15269-1 and the following apply. 3.1 full scale test test of a full size doorset in accordance with EN 1634-1 3.2 small scale test test on elements of building hardware in accordance with EN 1634-2 and where the decision process, given in EN 1634

33、-2, permits its use 3.3 effective rebate depth dimension of the door leaf thickness of overlapping adjacent edges of door leaf relative to the door frame, transom or side panel or other door leaf flush overpanel Note 1 to entry: At the meeting edges and for rebated leaves this dimension will be the

34、rebate where the intumescent seal is fitted or, if no seal is fitted, the depth of the largest rebate. Note 2 to entry: An example is shown in Figure C.1. 3.4 panel component of a door leaf separated from other elements by joints which break through the total door thickness Note 1 to entry: A door l

35、eaf can consist of one or more panels. 4 Determination of the field of extended application 4.1 General 4.1.1 Before there can be any consideration for extended application, a representative doorset shall have been tested and classified in accordance with EN1634-1 and EN 13501-2 respectively in orde

36、r to establish a classification for the doorset. 4.1.2 A review of the doorset construction parameters can indicate that one or more characteristics may be improved by a particular parameter variation. All evaluations shall be made on the basis of retaining the classifications obtainable from testin

37、g to EN 1634-1, including those lower than the test duration. However, this shall never lead to an increased classification for any specific parameter beyond that achieved during any one test unless specifically identified in the relevant Construction Parameter Variation tables. 4.1.3 If, when follo

38、wing the extended application procedure, any part of the classified product cannot be covered by the extended application rules, that part shall be omitted from the subsequent extended application report and classification report. 4.2 How to use extended application rules in Annex A 4.2.1 Identify t

39、he variations from the original test specimen(s) which are required to be covered by an extended application report. 4.2.2 Locate the variations in the appropriate parameter variation by reference to columns (1) and (2) of Annex A. BS EN 15269-2:2012EN 15269-2:2012 (E) 7 4.2.3 Review the type of cla

40、ssification to be retained from column (3) and establish from the contents of column (4) whether any extended application is available beyond the direct application rules in EN 1634-1 without the need for further testing. 4.2.4 Where this is deemed possible, it can be recorded in the extended applic

41、ation report together with any appropriate restrictions and the stated rules from column (4) of Annex A. 4.2.5 Where the variations required can only be achieved from additional testing, the additional test can be made on a similar specimen type i.e. a doorset of the same or more onerous configurati

42、on where the leaf construction is fundamentally the same as tested. Alternatively, column (5) identifies an option for alternative testing and relevant test parameters. 4.3 Procedure for maximum field of extended application 4.3.1 It is possible to provide an extended field of application from a sin

43、gle test. However, if a manufacturer intends to produce a range of doors incorporating single doors and also double doors, with or without side, transom or flush over panels, with or without glazing, with or without louvres or ventilation grilles, with alternative elements of building hardware, etc.

44、, it is recommended that careful consideration be given to the complete range of doorset designs and options in order to minimise the testing required before testing commences. 4.3.2 Establish all the parameter variations which are required to be part of the product range. 4.3.3 Determine which are

45、the most important specification requirements and incorporate as many as possible into the specimen(s) for the first tests in the series. 4.3.4 Conduct the first fire resistance test or a series of tests and then establish which of the original desired parameter variations have not been covered by t

46、he fire resistance tests, including direct application possibilities. 4.3.5 Identify these parameter variations in Annex A and establish if any extended application is possible without further testing. 4.3.6 Record this for the extended application report together with any restrictions and rules giv

47、en in column (4) in Annex A. 4.3.7 Evaluate which, if any, of the desired parameter variations have not been covered by the field of direct application or the initial field of extended application derived from 4.3.5. 4.3.8 Determine if the product range is to include only single leaf doorsets or if

48、the range is to also include double leaf configurations. Where only single doorsets are to be part of the product range, the outstanding construction parameter variations shall only be incorporated into specimens for the single leaf doorsets. Where single leaf and double leaf doorsets are to be incl

49、uded in the product range, the outstanding construction parameter variations for the extended application of single leaf doorsets may be incorporated into either repeated single leaf doorset tests or, in the weakest option, as defined in column (5) of the table in Annex A, double leaf doorset configurations. 4.3.9 Select the required outstanding parameter variations from column (1) and column (2) of Annex A and observe from column (5) in Annex A which are the most appropriate, wea