BS EN 14482-2010 Postal services Trays for international letter mail Test methods and performance requirements《邮政服务 国际信件邮寄用托盘 试验方法和性能要求》.pdf

《BS EN 14482-2010 Postal services Trays for international letter mail Test methods and performance requirements《邮政服务 国际信件邮寄用托盘 试验方法和性能要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 14482-2010 Postal services Trays for international letter mail Test methods and performance requirements《邮政服务 国际信件邮寄用托盘 试验方法和性能要求》.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 14482:2010Postal services Trays forinternational letter mail Test methods and performancerequirementsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/09/2011 08:13

2、, Uncontrolled Copy, (c) BSIBS EN 14482:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14482:2010. It supersedes DD CEN/TS 14482:2003 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee SVS/4, Postal services.A l

3、ist of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 70584 7 ICS 03.240 Compliance with a Brit

4、ish Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2011.Amendments issued since publicationDate T e x t a f f e c t e dLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/0

5、9/2011 08:13, Uncontrolled Copy, (c) BSIBS EN 14482:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14482 October 2010 ICS 55.160 Supersedes CEN/TS 14482:2003English Version Postal services - Trays for international letter mail - Test methods and performance requirements Services postaux -

6、Caissettes pour le courrier international - Mthodes dessais et exigences de performances Postalische Dienstleistungen - Behlter fr internationale Briefsendungen - Testmethoden und Anforderungen This European Standard was approved by CEN on 26 September 2010. CEN members are bound to comply with the

7、CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre o

8、r to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official ve

9、rsions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

10、Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for C

11、EN national Members. Ref. No. EN 14482:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/09/2011 08:13, Uncontrolled Copy, (c) BSIBS EN 14482:2010EN 14482:2010 (E) 2 Contents Page Foreword 4Introduction .51 Scope 62 Normative references 63 Terms and definitions .74 Requirements .74.1

12、General 74.2 Tray size requirements 74.3 Tray performance requirement .84.3.1 Compatibility 84.3.2 Compression 84.3.3 Durability 84.3.4 Closure 84.3.5 Flammability .84.3.6 Friction 84.3.7 Handles/handholds 84.3.8 Nestability .84.3.9 Recyclability .94.3.10 Stackability .94.3.11 Tare weight .94.3.12 T

13、emperature resistance 94.3.13 Weather resistance Water spray exposure 95 Test method 95.1 Test methods introduction .95.2 Test sampling and tray preparation 105.3 Test procedures 105.3.1 Test procedures introduction 105.3.2 Tare weight 105.3.3 Compatibility test 105.3.4 Nestability test 115.3.5 Stac

14、kability test. 115.3.6 Friction test . 115.3.7 Temperature resistance test 135.3.8 Weather resistance Water spray test . 13Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/09/2011 08:13, Uncontrolled Copy, (c) BSIBS EN 14482:2010EN 14482:2010 (E) 3 5.3.9 Compression test 135.3.10 Durability

15、 test . 135.4 Test report 15Annex A (informative) Sample test report 16Bibliography 25Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/09/2011 08:13, Uncontrolled Copy, (c) BSIBS EN 14482:2010EN 14482:2010 (E) 4 Foreword This document (EN 14482:2010) has been prepared by Technical Committee

16、 CEN/TC 331 “Postal services”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the lat

17、est by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 14482:2003. According to the CEN/CE

18、NELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithua

19、nia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/09/2011 08:13, Uncontrolled Copy, (c) BSIBS EN 14482:2010EN 14482:2010 (E) 5 Introduction The Europ

20、ean Union Commission stressed already in its Green paper on postal services in 1992 the need to establish common rules for the development of community postal services and the improvement of quality of service. Furthermore the Commission has acknowledged the need for technical harmonisation to incre

21、ase the interoperability of postal networks in the Member States and has given CEN a mandate to define fields where such harmonisation could be useful and suggest priorities and timescales. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/09/2011 08:13, Uncontrolled Copy, (c) BSIBS EN 14482

22、:2010EN 14482:2010 (E) 6 1 Scope This European Standard specifies the performance requirements and testing methods for standard letter mail trays, as specified in the classification below. The trays should be used to facilitate the exchange of international mail. The technical specification of the t

23、rays should be such that the performance requirements specified herein are met and tests specified herein successfully completed. The technical specifications of trays as such however, are beyond the scope of this standard. This standard covers a one-size universal letter mail tray suitable for carr

24、ying C4, C5 and C6 mail: Table 1 Letters (maximum accepted sizes) Height Width C4 353 mm 250 mm C5 173 mm 250 mm C6 120 mm 250 mm The trays are suitable for containing C4 mail stacked in a horizontal plane and for stacking C5 and C6 mail vertically. 2 Normative references The following referenced do

25、cuments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1005-2, Safety of machinery Human physical performance Part 2: Manual han

26、dling of machinery and component parts of machinery EN 22206, Packaging Complete, filled transport packages Identification of parts when testing (ISO 2206:1987) EN 22248, Packaging Complete, filled transport packages Vertical impact test by dropping (ISO 2248:1985) EN 60695-11-20, Fire hazard testin

27、g Part 11-20: Test flames 500 W flame test methods (IEC 60695-11-20:1999) EN ISO 2233, Packaging Complete, filled transport packages and unit loads Conditioning for testing (ISO 2233:2000) EN ISO 2247, Packaging Complete, filled transport packages and unit loads Vibration tests at fixed low frequenc

28、y (ISO 2247:2000) EN ISO 2875, Packaging Complete, filled transport packages and unit loads Water-spray test (ISO 2875:2000) EN ISO 4180, Packaging Complete, filled transport packages General rules for the compilation of performance test schedules (ISO 4180:2009) EN ISO 12048, Packaging Complete, fi

29、lled transport packages Compression and stacking tests using a compression tester (ISO 12048:1994) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/09/2011 08:13, Uncontrolled Copy, (c) BSIBS EN 14482:2010EN 14482:2010 (E) 7 3 Terms and definitions For the purposes of this document, the fol

30、lowing terms and definitions apply. 3.1 compatibility ability for trays and closures to fit well onto each other and ability of easy nesting into each other as well as separating of trays and closures from each other 3.2 durability ability of a tray and closure to withstand conditions to which it is

31、 subjected (when tested) 3.3 friction capacity to prevent sliding on an inclined low friction conveying surface specified as the coefficient of friction 3.4 letter mail category of postal items classified according to its physical characteristics such as weight and dimensions 3.5 nestability ability

32、 of trays and closures to fit together one partially inside the other (measured as the ratio of the number of trays and closures which can be nested in a stack for one tray (tray and closure) height) 3.6 recyclability ability to recover the material of a discarded tray (measured as the content of re

33、cycled material in a tray) 3.7 stackability ability to be stacked and fully palletisable when filled with letter mail 3.8 temperature resistance ability to maintain shape (when conditioned) within a pre-defined temperature range 3.9 tray primary container with closure for the carriage of letter mail

34、 3.10 weather resistance ability to remain serviceable (when conditioned) under specific weather conditions 4 Requirements 4.1 General The mail tray shall meet all the requirements stated in Clause 4. 4.2 Tray size requirements Minimum internal tray dimensions shall accommodate mail of the following

35、 sizes with ease of handling: Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/09/2011 08:13, Uncontrolled Copy, (c) BSIBS EN 14482:2010EN 14482:2010 (E) 8 Table 2 Height Width C4 353 mm 250 mm C5 173 mm 250 mm C6 120 mm 250 mm 4.3 Tray performance requirement 4.3.1 Compatibility Trays and

36、closures shall fit well onto each other, nest easily into each other and separate well from each other without the use of undue force. 4.3.2 Compression The trays shall meet a minimum compression strength requirement of 180 kg at a deflection of less than 10 mm before failure. NOTE This represents a

37、 five high stack of trays each weighing 10 kg and a safety factor of 4,5, as specified in EN ISO 12048. 4.3.3 Durability Trays shall withstand drop, vibration and crushing simulations as per the following: Each tray shall withstand a minimum average of 70 cycles with a standard deviation of maximum

38、20 %, as specified in EN ISO 2247, EN 22248, EN ISO 4180. 4.3.4 Closure The closure of the tray is to provide security during transit and handling. The closures shall fit well on the tray to prevent tampering with the content. The closures shall be enclosed tightly to the tray by means of strapping

39、in both directions, once over the width and once over the length of the tray. 4.3.5 Flammability Trays manufactured from plastic material shall meet requirements as specified in EN 60695-11-20. Trays made from alternative materials shall meet similar requirements when tested with appropriate flammab

40、ility tests. 4.3.6 Friction The friction coefficient between tray and conveyor surface as specified in 5.3.6 shall not be lower than 0,31. 4.3.7 Handles/handholds Handles/handholds shall be designed for ergonomically comfortable handling, with no sharp edges and as referenced in EN 1005-2. 4.3.8 Nes

41、tability Nesting ratio of trays and closures to the one “tray and closure height“ shall be a minimum of 1:5. The better the nesting ratio the lower the transport cost for moving empty trays and closures. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/09/2011 08:13, Uncontrolled Copy, (c)

42、BSIBS EN 14482:2010EN 14482:2010 (E) 9 4.3.9 Recyclability Trays should be manufactured from a material which is recyclable as specified in EN 13430. 4.3.10 Stackability Trays shall be stackable and inter-stackable. Trays that are stacked shall be placed on a flat, horizontal and level surface and r

43、emain stable at up to 1,8 m stacking height. 4.3.11 Tare weight The tray and closure shall meet the tray dimensions and durability requirements specified with a tare weight remaining as light as possible. Because of the impact of tare weight on transport cost, the tare weight shall not be higher tha

44、n 10 % of the maximum filled weight of the tray. The mail load capacity of the tray is determined by the minimum tray dimensions specified in 4.2. The average tare weight shall not exceed 1 050 g and the standard deviation shall not be higher than 1 % of the average weight. 4.3.12 Temperature resist

45、ance Trays shall be capable of being handled at extreme temperatures, as specified in EN ISO 2233: from - 35 C to 70 C there shall be materials stability such that the material shall maintain its essential shape for up to 8 h; at - 35 C the trays shall be resistant to the drop test (perform the drop

46、 test on the edge of the loaded tray with 10 kg gross weight from 1 m high). 4.3.13 Weather resistance Water spray exposure The tray and closure shall be weather resistant with no more than 3 % ingress of water as specified in EN ISO 2875. 5 Test method 5.1 Test methods introduction The following te

47、sting methods were designed to represent simulation of real life usage and handling in an international mail exchange environment. The test methods intend to characterize the functionality, strength and life span of trays used in the exchange of international mail. The tests are laboratory tests. Li

48、fe span is expressed as number of cycles successfully completed in the durability test (5.3.10), which is meant to reflect the minimum number of trips the tray can make in real life before failure. The life span expressed as number of cycles is not meant to be an indicator for the economic life span

49、, although in general the higher the number of cycles the higher the economic life span. Economic life span on the one hand is a function of materials / design / manufacture and is defined by the technical specification of the tray, and on the other hand it is a function of the equipment management determining circulation time and number of trays in circulation. These factors are