BS EN 413-1-2011 Masonry cement Composition specifications and conformity criteria《砌筑水泥 成分 规范和合格标准》.pdf

《BS EN 413-1-2011 Masonry cement Composition specifications and conformity criteria《砌筑水泥 成分 规范和合格标准》.pdf》由会员分享，可在线阅读，更多相关《BS EN 413-1-2011 Masonry cement Composition specifications and conformity criteria《砌筑水泥 成分 规范和合格标准》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationMasonry cementPart 1: Composition, specifications and conformity criteriaBS EN 413-1:2011BS EN 413-1:2011 BRITISH STANDARDNational forewordThis British Standard is the UK impleme

2、ntatinulln nullnull EN 413-1:2011null It snullpersedes BS EN 413-1:2004null nullhinullh is nullithdranullnnullThe UK partinullipatinulln in the preparatinulln nullnull EN 413-1:2011 nullas entrnullsted nullnullTenullhninullal nullnullmmittee Bnullnull1nullnull nullement and limenull tnull Snullnulln

3、ullnullmmittee Bnullnull1nullnull10nullnullasnullnrnull nullementnullA list nullnull nullrnullaninullatinullns represented nulln this snullnullnullnullmmittee nullan nulle nullnulltained nulln renullnullest tnull its senullretarnullnullnullhen the renullerennulle tnull this Enullrnullpean Standard h

4、as nulleen pnullnulllished in the nullnullnullnullial nullnullnullrnal nullnull the Enullrnullpean nullnullmmnullnities nullnullnullnullnull nullnullmpliannulle nullith it nullill nullnullnnuller a presnullmptinulln nullnull nullnullnnullnullrmitnull nullith the essential renullnullirements nullnull

5、nullered nullnull the Standard in respenullt nullnull the nullnullnstrnullnulltinulln nullrnulldnullnullts DirenulltinullenullAdditional informationIt shnullnullld nulle nnullted that the masnullnrnull nullement traditinullnallnull nullsed in the UK nullalls intnull the tnullpe nullnull 12nullnull n

6、ullnullnull 12nullnull innulllnulldes an air entraininnull anullentnull as spenullinulled in this British Standardnull There has nulleen nnull nullnulldnull nullnull enullperiennulle in the UK nullnull tnullpes nullnull nullnull nullnull 22nullnullnull nullnull 12nullnull null and nullnull 22nullnul

7、l nullnullAttentinulln is dranulln tnull Natinullnal annenull NA nullinnullnullrmatinullenullnull nullhinullh details the enullnullhannulle nullnull additinullnal innullnullrmatinulln that shnullnullld nulle made nulletnulleen the mannullnullanulltnullrer and nullser nullnull the masnullnrnull nulle

8、mentnull in spenullial nullasesnull in anullnullnullrdannulle nullith the nnullte tnull nulllanullse 1nullAttentinulln is dranulln tnull Natinullnal annenull NB nullinnullnullrmatinullenullnull nullhinullh nullinulles renullnullmmendatinullns nullnullr samplinnull and testinnull nullnullr anullnulle

9、ptannulle inspenulltinulln at delinullernullnullAttentinulln is dranulln tnull Natinullnal annenull Nnull nullinnullnullrmatinullenullnull nullhinullh nullinulles additinullnal innullnullrmatinulln nulln nullnullrnullanullilitnullnullAttentinulln is dranulln tnull Natinullnal annenull ND nullinnulln

10、ullrmatinullenullnull nullhinullh prnullnullides nullnullidannulle nulln the nulleneral nullse nullnull masnullnrnull nullementnull innulllnulldinnull health and sanulletnull aspenulltsnullAttentinulln is dranulln tnull Natinullnal annenull NE nullinnullnullrmatinullenullnull nullhinullh prnullnulli

11、des a nullinulllinullnullraphnull nullnull the pnullnulllinullatinullns renullerred tnull in the natinullnal annenullesnullThis pnullnulllinullatinulln dnulles nnullt pnullrpnullrt tnull innulllnullde all the nenullessarnull prnullnullisinullns nullnull a nullnullntranulltnull Users are respnullnsin

12、ullle nullnullr its nullnullrrenullt applinullatinullnnullCompliance with a British Standard cannot confer immnullnity from lenullal onulllinullationsnullAttentinulln is dranulln tnull the nullnullllnullnullinnull statnulltnullrnull renullnulllatinullns:The nullannullal Handlinnull nullperatinullns

13、Renullnulllatinullns 1nullnull2 nullas amendednullnullThe nullnullntrnulll nullnull Snullnullstannulles Hanullardnullnulls tnull Health Renullnulllatinullns 2002 nullnullnullSHHnullnullas amendednullnullThe nullheminullals nullHanullard Innullnullrmatinulln and nullanullnullanullinnull nullnullr Snu

14、llpplnullnullRenullnulllatinullns 200null nullnullHInull 4nullnullRenullnulllatinulln nullEnullnull Nnullnull 1null0nullnull200null nullnull the Enullrnullpean nullarliament and nullnullnullnnullil nullnull1null Denullemnuller 200null nullnullnnullerninnull the Renullistratinullnnull Enullalnullatin

15、ullnnull Anullthnullrisatinulln and Restrinulltinulln nullnull nullheminullals nullREAnullHnullnull estanulllishinnull a Enullrnullpean nullheminullals Anullennullnullnull amendinnull Direnulltinulle 1nullnullnullnull4nullnullEnull and repealinnull nullnullnullnnullil Renullnulllatinulln nullEEnulln

16、ull Nnullnull nullnull3nullnull3 and nullnullmmissinulln Renullnulllatinulln nullEnullnull Nnullnull 14nullnullnullnull4 as nullell BS EN 413-1:2011BRITISH STANDARDas nullnullnullnnullil Direnulltinulle nullnullnullnullnullnullnullEEnull and nullnullmmissinulln Direnulltinulles null1null1nullnullnul

17、lEEnullnullnull3nullnullnullnullEEnullnull null3null10nullnullEnull and 2000null21nullEnullnull Brnullssels: nullnullEU null 13nullnullISBN nullnullnull 0 nullnull0 null1nullnull2 nullInullS null1null100null10This British Standard nullas pnullnulllished nullnder the anullthnullritnull nullnull the S

18、tandards nullnulllinullnull and Stratenullnull nullnullmmittee nulln 30 nullnullne 2011nullnull BSI 2011Amendments and Corrinullenda issnulled since pnullnulllicationnullate nullenullt affected BS EN 413-1:2011 BRITISH STANDARDThis page deliberately left blankEUROPEAN STANDARD NORME EUROPENNE EUROPI

19、SCHE NORM EN 413-1 April 2011 ICS 91.100.10 Supersedes EN 413-1:2004English Version Masonry cement - Part 1: Composition, specifications and conformity criteria Putz- und Mauerbinder - Teil 1: Zusammensetzung, Anforderungen und Konformittskriterien This European Standard was approved by CEN on 10 Ma

20、rch 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obt

21、ained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the C

22、EN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg

23、, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of

24、 exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 413-1:2011: EBS EN 413-1:2011EN 413-1:2011 (E) 2 Contents page Foreword . 4Introduction 51 Scope 62 Normative references . 63 Terms and definitions . 74 Notation 85 Requirements 85.1 General . 85.2 Co

25、nstituents and composition 85.3 Physical and mechanical requirements 95.3.1 Fineness (sieve residue) 95.3.2 Initial setting time 95.3.3 Final setting time . 95.3.4 Soundness . 95.3.5 Fresh mortar requirements 95.3.6 Compressive strength 105.4 Chemical requirements 105.5 Durability requirements 116 S

26、tandard designation . 117 Conformity criteria 117.1 General requirements . 117.2 Conformity criteria for physical, mechanical and chemical properties and evaluation procedure 127.2.1 General . 127.2.2 Statistical conformity criteria 127.2.3 Single result conformity criteria 167.3 Conformity criteria

27、 for masonry cement composition 17Annex A (informative) Water-soluble hexavalent chromium . 18Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive 19Bibliography . 26Tables Table 1 Composition of masonry cements . 9Table 2 Fresh

28、 mortar requirements given as characteristic values . 10 Table 3 Compressive strength requirements given as characteristic values . 10 Table 4 Chemical requirements given as characteristic values . 11 Table 5 Properties, test methods and minimum testing frequencies for the autocontrol testing by the

29、 manufacturer, and the statistical assessment procedure 13Table 6 Required values of Pkand CR 14Table 7 Acceptability constant . 15BS EN 413-1:2011EN 413-1:2011 (E) 3 Table 8 Values of cA16Table 9 Limit values for single results . . 17Table ZA.1 Harmonised clauses . 20Table ZA.2 System of attestatio

30、n of conformity . . 21Table ZA.3 Assignment of evaluation of conformity tasks for masonry cement under system 1+ . 22BS EN 413-1:2011EN 413-1:2011 (E) 4 Foreword This document (EN 413-1:2011) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes“, the secretariat of which is

31、held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibilit

32、y that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 413-1:2004. The European Standard, EN 413, “Masonry cement”, consists of the following parts:

33、Part 1: Composition, specifications and conformity criteria; Part 2: Test methods. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directi

34、ve(s), see informative Annex ZA, which is an integral part of this document. EN 413-1 has been prepared to provide a range of materials from which users of EN 998-1, EN 998-2 and EN 1996-1-1 (Eurocode 6) can select with confidence to achieve the level of strength and durability required of masonry a

35、nd rendering. The main changes from EN 413-1:2004 are as follows: - introduction of a class MC 22,5 (air-entrained) cement; - removal of references to EN 459-2 for compressive strength testing; - the upper limit for SO3content is increased. According to the CEN/CENELEC Internal Regulations, the nati

36、onal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

37、 Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 413-1:2011EN 413-1:2011 (E) 5 Introduction Masonry cement should be defined and specified precisely with sufficiently stringent requirements to satisfy those who are responsible for the desig

38、n and construction of buildings and other structures for maximum safety and durability. This European Standard is a carefully balanced document that has been thoroughly discussed, taking into account the need to provide clear definitions and specifications and to arrive at a usable standard. The req

39、uirements of this European Standard are, where appropriate, based on the results from tests on masonry cement in accordance with EN 196 Methods of testing cement. Strength is measured on a standard mortar prepared in accordance with EN 196-1 with a fixed water/cement ratio and compacted using the eq

40、uipment described in EN 196-1. However, some additional tests have been found necessary and these tests are described in EN 413-2. CEN/TC 51 recognises the importance of workability (cohesivity at standard consistence) of mortars prepared from masonry cements. A test method is available in CR 13933,

41、 and in which results of a test programme are also given. This test method was not found valid for standard requirement purposes due to its lack of reproducibility, however it provides valuable information for the manufacturers and users on the property in use of masonry cements. The properties of b

42、ond and durability (resistance to frost and/or chemical attack) of mortars are very important and appropriate mortar tests are being developed by CEN/TC 125, Masonry. In many applications, particularly in severe environmental conditions, the choice of the type/class of masonry cement from EN 413-1 c

43、an influence the durability of mortar, e.g. in respect of frost and chemical resistance. BS EN 413-1:2011EN 413-1:2011 (E) 6 1 Scope This European Standard specifies the definition and composition of masonry cements as commonly used in Europe for the production of mortar for bricklaying and blocklay

44、ing and for rendering and plastering. It includes physical, mechanical and chemical requirements and defines strength classes. EN 413-1 also states the conformity criteria and the related rules. Necessary durability requirements are also given. NOTE For normal applications the information given in E

45、N 413-1, in EN 998-1 and in EN 998-2 is generally sufficient. However, in special cases, an exchange of additional information between the masonry cement producer and user can be helpful. The details of such an exchange are not within the scope of EN 413-1 but should be dealt with in accordance with

46、 national standards or other regulations or can be agreed between the parties concerned. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition

47、of the referenced document (including any amendments) applies. EN 196-1, Methods of testing cement Part 1: Determination of strength EN 196-2, Methods of testing cement Part 2: Chemical analysis of cement EN 196-3, Methods of testing cement Part 3: Determination of setting time and soundness EN 196-

48、6, Methods of testing cement Part 6: Determination of fineness EN 196-7, Methods of testing cement Part 7: Methods of taking and preparing samples of cement EN 197-1, Cement Part 1: Composition, specifications and conformity criteria for common cements EN 413-2, Masonry cement Part 2: Test methods E

49、N 459-1, Building lime - Part 1: Definitions, specifications and conformity criteria EN 12878, Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test BS EN 413-1:2011EN 413-1:2011 (E) 7 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 masonry cement factory made finely powdered hydraulic binder which rel