BS EN 1863-1-2011 Glass in building Heat strengthened soda lime silicate glass Definition and description《建筑玻璃 热增强硅酸钠钙玻璃 定义和说明》.pdf

《BS EN 1863-1-2011 Glass in building Heat strengthened soda lime silicate glass Definition and description《建筑玻璃 热增强硅酸钠钙玻璃 定义和说明》.pdf》由会员分享，可在线阅读，更多相关《BS EN 1863-1-2011 Glass in building Heat strengthened soda lime silicate glass Definition and description《建筑玻璃 热增强硅酸钠钙玻璃 定义和说明》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1863-1:2011Glass in building Heatstrengthened soda lime silicateglassPart 1: Definition and descriptionCopyright European Committee for Standardization Provided by IHS unde

2、r license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1863-1:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1863-1:2011. Itsupersedes BS EN 1863-1:2000 which is withdrawn.The UK participation in its prep

3、aration was entrusted to TechnicalCommittee B/520/1, Basic and transformed glass products.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for

4、 its correctapplication. The British Standards Institution 2012ISBN 978 0 580 74200 2ICS 81.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.A

5、mendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1863-1:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1863-1 N

6、ovember 2011 ICS 81.040.20 Supersedes EN 1863-1:2000English Version Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description Verre dans la construction - Verre de silicate sodo-calcique durci thermiquement - Partie 1: Dfinition et description Glas im Bauwes

7、en - Teilvorgespanntes Kalknatronglas - Teil 1: Definition und Beschreibung This European Standard was approved by CEN on 25 September 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nati

8、onal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A ver

9、sion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus,

10、Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT

11、EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1863-1:2011: ECopyright European Committee for Standardization Provid

12、ed by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1863-1:2011EN 1863-1:2011 (E) 2 Contents Page Foreword 4Introduction .51 Scope 62 Normative references 63 Terms and definitions .64 Glass products .75 Fracture characteristics 86

13、Dimensions and tolerances 86.1 Nominal thickness and thickness tolerances .86.2 Width and length (sizes) .96.2.1 General 96.2.2 Maximum and minimum sizes 96.2.3 Tolerances and squareness .96.2.4 Edge deformation produced by the vertical process 106.3 Flatness . 106.3.1 General . 106.3.2 Measurement

14、of overall bow . 136.3.3 Measurement of roller wave 146.3.4 Measurement of edge lift (for horizontally heat strengthened glass only) . 156.3.5 Measurement of local distortion (for vertically heat strengthened glass only) . 166.3.6 Limitation on overall bow, roller waves and edge lift for horizontall

15、y heat strengthened glass . 176.3.7 Limitation on overall bow and local distortion for vertically heat strengthened glass . 186.3.8 Other distortions . 187 Edge and/or surface work, holes, notches and cut-outs 187.1 Warning 187.2 Edge working of glass for toughening . 187.3 Profiled edges . 197.4 Ro

16、und holes 197.4.1 General . 197.4.2 Diameter of holes 207.4.3 Limitations on position of holes . 207.4.4 Tolerances on hole diameters . 217.4.5 Tolerances on position of holes 217.5 Holes/others 227.6 Notches and cut-outs . 227.7 Shaped panes 238 Fragmentation test 238.1 General . 238.2 Dimensions a

17、nd number of test specimens 238.3 Test procedure 238.4 Assessment of fragmentation . 248.5 Evaluation of fragmentation 269 Other physical characteristics 269.1 Optical distortion 269.1.1 Heat strengthened soda lime silicate glass produced by vertical toughening 269.1.2 Heat strengthened soda lime si

18、licate glass produced by horizontal toughening . 27Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1863-1:2011EN 1863-1:2011 (E) 3 9.2 Anisotropy (iridescence) 279.3 Therma

19、l durability . 279.4 Mechanical strength 2710 Marking . 28Annex A (informative) Alternative method for the measurement of roller wave distortion 29A.1 Apparatus . 29A.2 Method 29A.3 Limitations . 30A.4 Alternative use of apparatus 30Copyright European Committee for Standardization Provided by IHS un

20、der license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1863-1:2011EN 1863-1:2011 (E) 4 Foreword This document (EN 1863-1:2011) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This

21、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the element

22、s of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1863-1:2000. This document has been prepared under a mandate given to CEN by the European Commission and the European Fr

23、ee Trade Association. EN 1863 is divided into the following parts: EN 1863-1, Glass in building Heat strengthened soda lime silicate glass Part 1: Definition and description; EN 1863-2, Glass in building Heat strengthened soda lime silicate glass Part 2: Evaluation of conformity/Product standard. Th

24、is European Standard differs from EN 1863-1:2000 as follows: a) some figures have been revised and some new figures have been added; b) new terms and definitions have been included in Clause 3, e.g. edge deformation (3.2), local distortion (3.8) and overall bow (3.9); c) further nominal thicknesses

25、have been included in Table 1; d) Subclause 6.2.3 “Tolerances and squareness“ has been completely revised; the squareness of rectangular glass panes is now expressed by the difference between its diagonals; e) Clauses 6 and 7 have been completely revised; f) the previous Clauses 9 and 10 have been r

26、evised and have been combined in a new Clause 9 “Other physical characteristics“; g) the normative Annex “Determination of U value“ has been deleted; h) a new informative Annex dealing with an alternative method for the measurement of roller wave distortion has been added. According to the CEN/CENEL

27、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania

28、, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license fro

29、m IHS-,-,-BS EN 1863-1:2011EN 1863-1:2011 (E) 5 Introduction Heat strengthened soda lime silicate glass has a higher resistance to thermal stress and an enhanced mechanical strength when compared to annealed glass. NOTE CEN/TC 129/WG 8 is producing standards for the determination of the design stren

30、gth of glass and is preparing a design method. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1863-1:2011EN 1863-1:2011 (E) 6 1 Scope This European Standard specifies tole

31、rances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat strengthened soda lime silicate glass of nominal thicknesses from 3 mm to 12 mm for use in buildings. Other requirements, not specified in this standard, can apply to heat strengthened soda

32、lime silicate glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Heat strengthened soda lime silicate glass, in this case, does n

33、ot lose its mechanical or thermal characteristics. This European Standard does not cover glass sandblasted after toughening. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For und

34、ated references, the latest edition of the referenced document (including any amendments) applies. EN 572-1, Glass in building Basic soda lime silicate glass products Part 1: Definitions and general physical and mechanical properties EN 572-2, Glass in Building Basic soda lime silicate glass product

35、s Part 2: Float glass EN 572-4, Glass in building Basic soda lime silicate glass products Part 4: Drawn sheet glass EN 572-5, Glass in Building Basic soda lime silicate glass products Part 5: Patterned glass EN 572-8, Glass in building Basic soda lime silicate glass products Part 8: Supplied and fin

36、al cut sizes EN 1096-1, Glass in building Coated glass Part 1: Definitions and classification EN 1288-3, Glass in building Determination of the bending strength of glass Part 3: Test with specimen supported at two points (four point bending) 3 Terms and definitions For the purposes of this document,

37、 the following terms and definitions apply. 3.1 curved heat strengthened soda lime silicate glass heat strengthened soda lime silicate glass which has been deliberately given a specific profile during manufacture 3.2 edge deformation deformation of the edge because of the tong marks 3.3 edge lift (a

38、lso referred to as edge dip) distortion produced in horizontal heat strengthened glass, at the leading and trailing edge of the plate NOTE This is a distortion produced by a reduction in surface flatness. Copyright European Committee for Standardization Provided by IHS under license with CENNot for

39、ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1863-1:2011EN 1863-1:2011 (E) 7 3.4 enamelled heat strengthened soda lime silicate glass heat strengthened soda lime silicate glass which has a ceramic frit fired into the surface during the heat strengthening process N

40、OTE 1 After heat strengthening the ceramic frit becomes an integral part of the glass. NOTE 2 In the UK, this glass is also known as opaque heat strengthened soda lime silicate glass. NOTE 3 The application of the ceramic frit may be by a continuous process or discontinuous application, e.g. screen

41、printing. The enamelled surface could be partially or wholly covered. 3.5 flat heat strengthened soda lime silicate glass heat strengthened soda lime silicate glass which has not been deliberately given a specific profile during manufacture 3.6 heat strengthened soda lime silicate glass glass within

42、 which a permanent surface compressive stress, additionally to the basic mechanical strength, has been induced by a controlled heating and cooling process in order to give it increased resistance to mechanical and thermal stress and prescribed fracture characteristics NOTE The thermal durability and

43、 mechanical strength are generated by the level of surface compression. These properties are not size dependent. 3.7 horizontal process process in which the glass is supported on horizontal rollers 3.8 local distortion local deformation of vertically heat strengthened glass underneath the tong marks

44、 3.9 overall bow deformation of the whole pane of horizontally and vertically heat strengthened glass caused by the heating and cooling process 3.10 roller wave distortion distortion produced in horizontal heat strengthened glass as a result of the glass during heat strengthening process being in co

45、ntact with the rollers NOTE This is a surface distortion produced by a reduction in surface flatness. 3.11 vertical process process in which the glass is suspended by tongs 4 Glass products Heat strengthened soda lime silicate glass is made from a monolithic glass generally corresponding to one of t

46、he following standards: soda lime silicate glass according to EN 572-1; float glass according to EN 572-2; Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 1863-1:2011EN 186

47、3-1:2011 (E) 8 drawn sheet glass according to EN 572-4; patterned glass according to EN 572-5; supplied and final cut sizes according to EN 572-8; coated glass according to EN 1096-1. Glass of nominal thicknesses between 3 mm and 12 mm other than those covered in the above standards are possible. 5

48、Fracture characteristics In the event of breakage, heat strengthened soda lime silicate glass fractures in a manner similar to annealed glass (see Clause 8). The fragmentation described in Clause 8 is undertaken on unrestrained test specimens. The fragmentation in service may not always correspond to that determined during the fragmentation test due to the imposition of other stresses, i.e. from fixing or from reprocessing (e.g. laminating). NOTE The fractur