BS EN 1504-8-2016 Products and systems for the protection and repair of concrete structures Definitions requirements quality control and AVCP Quality control and Assessment and ver.pdf

《BS EN 1504-8-2016 Products and systems for the protection and repair of concrete structures Definitions requirements quality control and AVCP Quality control and Assessment and ver.pdf》由会员分享，可在线阅读，更多相关《BS EN 1504-8-2016 Products and systems for the protection and repair of concrete structures Definitions requirements quality control and AVCP Quality control and Assessment and ver.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 1504-8:2016Products and systems forthe protection and repairof concrete structures Definitions, requirements,quality control and AVCPPart 8: Quality control and Assessmentand verification of the constancy ofperformance (AVCP)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/0

2、5/2013 15:06BS EN 1504-8:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1504-8:2016. Itsupersedes BS EN 1504-8:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/517/8, Protection and repair of concrete st

3、ructures.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI

4、 StandardsLimited 2016ISBN 978 0 580 91000 5ICS 91.080.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2016.Amendments issued since publicationDate Text a

5、ffectedBS EN 1504-8:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1504-8 May 2016 ICS 91.080.40 Supersedes EN 1504-8:2004English Version Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality contro

6、l and Assessment and verification of the constancy of performance (AVCP) Produits et systmes pour la protection et la rparationde structures en bton - Dfinitions, prescriptions, matrise de la qualit et EVCP - Partie 8 : Matrise de la qualit et valuation et vrification de la constance des performance

7、s (EVCP) Produkte und Systeme fr den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualittskontrolle und AVCP - Teil 8: Qualittskontrolle und Bewertung und berprfung der Leistungsbestndigkeit (AVCP) This European Standard was approved by CEN on 12 March 2016. CEN m

8、embers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applic

9、ation to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Mana

10、gement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvi

11、a, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marni

12、x 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1504-8:2016 EBS EN 1504-8:2016EN 1504-8:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Samp

13、ling . 5 4.1 General 5 4.2 Record . 5 4.3 Frequency of sampling 5 5 Assessment and verification of the constancy of performance (AVCP) . 6 5.1 General 6 5.2 Type testing . 6 5.2.1 General 6 5.2.2 Test samples, testing and compliance criteria . 7 5.2.3 Test reports . 7 5.2.4 Shared other party result

14、s . 7 5.2.5 Cascading determination of the product-type result . 8 5.3 Factory Production Control (FPC) . 9 5.3.1 General 9 5.3.2 Requirements . 9 5.3.3 Product specific requirements 11 5.3.4 Initial inspection of factory and of FPC 12 5.3.5 Continuous surveillance of FPC only for products covered b

15、y AVCP system 1+, 1 and 2+ 12 5.3.6 Procedure for modification 13 5.3.7 One-off products, pre-production products (e.g. prototypes) and products produced in very low quantity . 13 6 Marking and labelling . 14 Bibliography . 15 BS EN 1504-8:2016EN 1504-8:2016 (E) 3 European foreword This document (EN

16、 1504-8:2016) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November

17、 2016, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This doc

18、ument supersedes EN 1504-8:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. The main changes that have been made in this new edition are as follows: The wording has been adapted to the CPR (Regulation (EU) No. 305/

19、2011). EN 1504 consists of the following parts under the general title Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and AVCP. Part 1: Definitions Part 2: Surface protection systems for concrete Part 3: Repair concrete and mortar

20、s Part 4: Structural bonding Part 5: Concrete injection Part 6: Anchoring of reinforcing steel bar Part 7: Reinforcement corrosion protection Part 9: General principles for the use of products and systems Part 10: Site application of products and systems and quality control of the works According to

21、 the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece

22、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1504-8:2016EN 1504-8:2016 (E) 4 1 Scope This Part of EN 1504 specifies procedures for samplin

23、g, quality control, assessment and verification of the constancy of performance (AVCP) including marking and labelling of products and systems for the protection and repair of concrete according to EN 1504-2 to EN 1504-7. 2 Normative references The following documents, in whole or in part, are norma

24、tively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1504-1, Products and systems for the protection and repair

25、of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions EN 1504-2, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface prot

26、ection systems for concrete EN 1504-3, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair EN 1504-4, Products and systems for the protection and repair of c

27、oncrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding EN 1504-5, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete

28、injection EN 1504-6, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar EN 1504-7, Products and systems for the protection and repair of concrete structures -

29、 Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1504-1 and the following apply. 3.1 batch quantity of material made in a single opera

30、tion, or in the case of continuous production for a defined quantity (in tonnes) which shall be demonstrated by the producer to have a uniform composition and shall not exceed one days production 3.2 identification test test carried out to verify a declared value of the composition or property of th

31、e product or system in terms of consistency of the production Note 1 to entry: This is to ensure that the product or system being tested corresponds to the product or system subjected to the initial type test, within the permitted tolerances. BS EN 1504-8:2016EN 1504-8:2016 (E) 5 3.3 performance tes

32、t test carried out to verify a value for essential characteristics of the product or system in terms of its specified performance during application and use Note 1 to entry: This is to ensure that the product or system conforms to its specified performance characteristics. 3.4 declared value value d

33、eclared and documented by the manufacturer for identification or essential characteristics 4 Sampling 4.1 General Sampling shall be carried out in such a way that the resulting sample is homogeneous and representative of the batch or product to be inspected. Samples shall be clearly labelled to uniq

34、uely identify the source, location and time of sampling. The sample size shall be sufficient for all the required testing in accordance with the relevant test method standards. A part of the sample should be retained for future reference until the use by date. 4.2 Record All information relevant to

35、the sampling shall be recorded, including in particular: a) date of manufacture and sampling; b) unique identification of the product and of the sample(s); c) type of material and quantity of sample(s); d) name of the manufacturer; e) manufacturers batch identification number; f) quantity of batch o

36、r product represented by the sample; g) physical state; h) colour or appearance; i) name(s) of the person(s) responsible for sampling; j) method of sampling. 4.3 Frequency of sampling For frequency of sampling see frequency of testing in EN 15042 to EN 15047. BS EN 1504-8:2016EN 1504-8:2016 (E) 6 5

37、Assessment and verification of the constancy of performance (AVCP) 5.1 General The compliance of the products and systems for the protection and repair of concrete structures with the requirement of this standard and with the performances declared by the manufacturer in the DoP shall be demonstrated

38、 by: determination of the product-type; factory production control by the manufacturer, including product assessment. The manufacturer shall always retain the overall control and shall have the necessary means to take responsibility for the conformity of the product with its declared performance(s).

39、 NOTE The assignment of tasks to the notified bodies and the manufacturer is shown in the Annexes ZA (Table ZA.3 and following Tables) of the relevant part of the EN 1504 series. 5.2 Type testing 5.2.1 General All performances related to characteristics included in this standard shall be determined

40、when the manufacturer intends to declare the respective performances unless the standard gives provisions for declaring them without performing tests. (e.g. use of previously existing data, CWFT and conventionally accepted performance). Assessment previously performed in accordance with the provisio

41、ns of this standard, may be taken into account provided that they were made to the same or a more rigorous test method, under the same AVCP system on the same product or products of similar design, construction and functionality, such that the results are applicable to the product in question. NOTE

42、1 Same AVCP system means testing by an independent third party only for products covered by system 1+, 1 and 3, under the responsibility of a notified product certification body only for products covered by system 1+ and 1. For the purposes of assessment, the manufacturers products may be grouped in

43、to families, where it is considered that the results for one or more characteristics from any one product within the family are representative for that same characteristics for all products within that same family NOTE 2 Products may be grouped in different families for different characteristics. Re

44、ference to the assessment method standards should be made to allow the selection of a suitable representative sample. In addition, the determination of the product-type shall be performed for all characteristics included in the standard for which the manufacturer declares the performance: at the beg

45、inning of the production of a new or modified product or system for the protection and repair of concrete structures (unless a member of the same product range), or at the beginning of a new or modified method of production (where this may affect the stated properties); or they shall be repeated for

46、 the appropriate characteristic(s), whenever a change occurs in the product or system for the protection and repair of concrete structures design, in the raw material or in the supplier of the components, or in the method of production (subject to the definition of a family), which would affect sign

47、ificantly one or more of the characteristics. BS EN 1504-8:2016EN 1504-8:2016 (E) 7 Where components are used whose characteristics have already been determined, by the component manufacturer, on the basis of assessment methods of other product standards, these characteristics need not be re-assesse

48、d. The specifications of these components shall be documented. Products bearing regulatory marking in accordance with appropriate harmonized European specifications may be presumed to have the performances declared in the DoP, although this does not replace the responsibility on the product or syste

49、m for the protection and repair of concrete structures manufacturer to ensure that the product or system for the protection and repair of concrete structures as a whole is correctly manufactured and its component products have the declared performance values. 5.2.2 Test samples, testing and compliance criteria The number of samples of products and systems for the protection and repair of concrete structures to be tested/assessed shall be as specified by the materials specification part of this standard (EN 1504-2 to EN 15047