ASTM F1736-2009(2016) Standard Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms《用作食物以控制病原菌和腐败微生物的有鳍鱼类和水生无脊椎动.pdf

《ASTM F1736-2009(2016) Standard Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms《用作食物以控制病原菌和腐败微生物的有鳍鱼类和水生无脊椎动.pdf》由会员分享，可在线阅读，更多相关《ASTM F1736-2009(2016) Standard Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms《用作食物以控制病原菌和腐败微生物的有鳍鱼类和水生无脊椎动.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: F1736 09 (Reapproved 2016)Standard Guide forIrradiation of Finfish and Aquatic Invertebrates Used asFood to Control Pathogens and Spoilage Microorganisms1This standard is issued under the fixed designation F1736; the number immediately following the designation indicates the year oforig

2、inal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThe purpose of this guide is to present information on the use

3、of ionizing radiation for eliminatingor reducing the number of pathogenic microorganisms and parasites and for reducing the number ofspoilage microorganisms on finfish and aquatic invertebrates. Information on the handling of finfishand aquatic invertebrates before receipt by the irradiation facilit

4、y and after shipment from the facilityis also provided.This guide is intended to serve as a set of recommendations to be followed when using irradiationtechnology where approved by an appropriate regulatory control authority. It is not to be construed assetting forth rigid requirements for the use o

5、f irradiation. While the use of irradiation involves certainessential requirements to attain the objective of the treatment, some parameters can be varied inoptimizing the process.This guide is based on a guideline published by the International Consultative Group on FoodIrradiation (ICGFI) at the i

6、nitiation of the Joint Food and Agriculture Organization/InternationalAtomic Energy Agency Division of Nuclear Techniques in Food and Agriculture, which serves as theSecretariat to the ICGFI.1. Scope1.1 This guide outlines procedures and operations for theirradiation of raw, untreated, fresh (chille

7、d), or frozen finfishand aquatic invertebrates, while ensuring that the irradiatedproduct is safe and wholesome.1.1.1 Aquatic invertebrates include molluscs, crustacea,echinoderms, etc.1.1.1.1 Molluscs include bivalve shellfish, such as clams,mussels, and oysters; snails; and cephalopods, such as sq

8、uidand octopus.1.1.1.2 Crustacea include shellfish such as shrimp, lobster,crabs, prawns and crayfish.1.1.1.3 Echinoderms include sea urchins and sea cucum-bers.1.2 This guide covers absorbed doses used to reduce themicrobial and parasite populations in aquatic invertebrates andfinfish. Such doses t

9、ypically are below 10 kGy (1).21.3 The use of reduced-oxygen packaging (vacuum ormodified atmosphere, and including products packed in oil)with irradiated, raw product is not covered by this guide. Theanaerobic environment created by reduced-oxygen packagingprovides the potential for outgrowth of, a

10、nd toxin productionfrom, Clostridium botulinum spores.1.4 This guide does not cover the irradiation of smoked ordried fish to reduce microbial load or to control insectinfestation.1.5 The values stated in SI units are to be regarded asstandard. No other units of measurement are included in thisstand

11、ard.1.6 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory requirements prior to use.2. Referen

12、ced Documents2.1 ASTM Standards:31This guide is under the jurisdiction of ASTM Committee E61 on RadiationProcessing and is the direct responsibility of Subcommittee E61.05 on FoodIrradiation.Current edition approved June 1, 2016. Published July 2016. Originally approvedin 1996. Last previous edition

13、 approved in 2009 as F1736 09. DOI: 10.1520/F1736-09R16.2The boldface numbers in parentheses refer to the list of references at the end ofthis standard.3For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMSta

14、ndards volume information, refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1E170 Terminology Relating to Radiation Measurements andDosimetryF1416 Guide for Selection of Ti

15、me-Temperature IndicatorsF1640 Guide for Selection and Use of Packaging Materialsfor Foods to Be Irradiated2.2 ISO/ASTM Standards:351204 Practice for Dosimetry in Gamma Irradiation Facili-ties for Food Processing51261 Guide for the Selection andApplication of DosimetrySystems for Radiation Processin

16、g51431 Practice for Dosimetry in Electron Beam and X-Ray(Bremsstrahlung) Irradiation Facilities for Food Process-ing51539 Guide for Use of Radiation-Sensitive Indicators2.3 Codex Alimentarius Commission Recommended Inter-national Codes and Standards:4Codex Stan 1 General Standards for the Labelling

17、ofPrepackaged FoodsCodex Stan 19 Recommended International Code of Prac-tice for the Operation of Irradiation Facilities for theTreatment of FoodCodex Stan 106 Codex General Standard for IrradiatedFoodsCAC/RCP 9 Recommended International Code of Practicefor Fresh FishCAC/RCP 16 Recommended Internati

18、onal Code of Practicefor Frozen FishCAC/RCP 17 Recommended International Code of Practicefor Shrimps and PrawnsCAC/RCP 18 Recommended International Code of Hy-gienic Practice for Molluscan ShellfishCAC/RCP 24 Recommended International Code of Practicefor LobstersCAC/RCP 27 Recommended International

19、Code of Practicefor Minced Fish Prepared by Mechanical SeparationCAC/RCP 28 Recommended International Code of Practicefor CrabsCAC/RCP 37 Recommended International Code of Practicefor CephalopodsCAC/RCP20 Code of Ethics for International Trade in FoodCAC/RCP42 Sampling Plans for Prepackaged Foods (A

20、QL6.5)3. Terminology3.1 Definitions:3.1.1 Other terms used in this guide may be defined inTerminology E170.3.1.2 absorbed dosequantity of ionizing radiation energyimparted per unit mass of specified material. The SI unit forabsorbed dose is the gray (Gy), where one gray is equivalent tothe absorptio

21、n of 1 joule per kilogram of the specified material(1Gy = 1 J/kg).3.1.2.1 DiscussionA standard definition of absorbed doseappears in Terminology E170.3.1.3 dose distributionvariation in absorbed dose within aprocess load exposed to ionizing radiation.3.1.4 process loadvolume of material with a speci

22、fiedproduct loading configuration irradiated as a single entity.3.1.5 transport systemconveyor or other mechanical sys-tem used to move the product to be irradiated through theirradiator.4. Significance and Use4.1 Absorbed doses of or below 1 kGy can inactivate someparasites, such as the broad fish

23、tapeworm (Dibothrocephaluslatus) (2).4.2 Absorbed doses below 10 kGy can reduce or eliminatevegetative cells of pathogenic sporeforming and non-sporeforming microorganisms, such as Clostridia spp., Vibriospp., Salmonellae, Listeria monocytogenes,orStaphylococcusaureus, that may be present in fresh o

24、r frozen product.4.2.1 Absorbed doses below 10 kGy can reduce the numbersof some spores, but are not adequate to reduce the potentialhealth risk from microbial spores or toxins (3).4.3 Absorbed doses below 10 kGy can reduce or eliminatethe vegetative cells of sporeforming and non-sporeformingmicroor

25、ganisms, such as Bacillus or Pseudomonas species, thatcause spoilage of fresh product, thus extending refrigeratedshelf life in many cases (4).5. Harvest/Raw Material5.1 Follow relevant Recommended International Codes ofPractice (RCP) and Standards of Good Manufacturing Practiceof the CodexAlimentar

26、ius Commission (CAC) for maintainingthe initial quality of the fresh or frozen product during handlingfrom the time of harvest through the time of sale to theconsumer (5). See CAC/RCP 9, CAC/RCP 16, CAC/RCP 17,CAC/RCP 18, CAC/RCP 24, CAC/RCP 27, CAC/RCP 28,CAC/RCP 37, and CAC/RCP 20.5.2 In handling,

27、 preparing, freezing, storing, and thawingfinfish and aquatic invertebrates intended for irradiation, takeprecautions at all times to minimize microbial contaminationand outgrowth. Use standards of hygiene as high as thoseapplied in the processing or preparation of product for thefrozen or fresh mar

28、kets.5.3 Deliver product to the irradiation facility without delay,such that irradiation occurs as close to the time of harvest aspossible. Products approaching the end of their shelf lifeshould not be irradiated in an attempt to extend that shelf life.NOTE 1While irradiation can improve finfish and

29、 aquatic inverte-brates from a public health aspect by reducing the microbial and parasitepopulations within product, chemical reactions (for example, oxidativedegradation) that cause product to spoil also need to be considered whenassessing the appropriateness of radiation treatment (6).6. Packagin

30、g6.1 Packaging product prior to irradiation is one means ofpreventing post-irradiation contamination.6.2 Use packaging materials suitable to the product consid-ering any planned processing (including irradiation) and con-sistent with any regulatory requirements (see Guide F1640).4Available from Join

31、t FAO/WHO Food Standards Program, Joint Office, Foodand Agriculture Organization of the United Nations, Via delle Terme di Caracalla,00100 Rome, Italy.F1736 09 (2016)26.3 With certain irradiation facilities, it may be necessary tolimit use to particular package shapes and sizes. See ISO/ASTM Practic

32、es 51204 and 51431. Irradiation can be opti-mized if the product packages are geometrically well definedand uniform.7. Pre-Irradiation Product Handling7.1 Inspect product as soon as it arrives at the radiationprocessing facility to determine that it has been properlyhandled prior to arrival.7.2 Temp

33、erature Control of Product:7.2.1 The temperature of fresh product, excludingunshucked, live molluscan shellfish, received in the chilledstate should be maintained as close to 0C (32F) as possible inaccordance with good manufacturing practices (GMPs). Careshould be taken to prevent freezing of the pr

34、oduct. Pre-irradiation storage at the irradiation facility should be short;less than one day is recommended.NOTE 2Fresh product is usually stored and transported under crushed,melting ice. When refrigeration is used, the risk of freezing exists.7.2.2 The temperature of unshucked, live molluscan shel

35、l-fish received in the chilled state should be maintained between4C (39F) and 7C (45F) in accordance with GMPs. Pre-irradiation storage at the irradiation facility should be short;less than one day is recommended.NOTE 3To maintain unshucked molluscan shellfish in the live state,the storage temperatu

36、re should be above 4C (39F).7.2.3 The surface temperature of product received in thefrozen state should be maintained below 18C (0F).NOTE 4Freezing does not provide an unlimited shelf life without lossof quality, and the pre-irradiation storage period should therefore beminimized. The effect of froz

37、en storage on product quality will be afunction of time, temperature, and degree of temperature fluctuation.7.2.4 Handling and storage procedures that differ from thosedescribed in Sections 5 and 6, especially holding underrefrigeration for an unduly long time, do not constitute GMP.Such treatment m

38、ay result in excessive bacterial growth andundesirable changes in the products.7.3 Inspect all shipping documents arriving with the ship-ment to verify that they are complete and accurate.7.3.1 The documents should include a lot number or othermeans of traceability (see 12.1).7.4 Use appropriate mea

39、ns, such as physical barriers, tokeep non-irradiated and irradiated product separated at alltimes while at the irradiation facility. This is necessary becauseit may not be possible to distinguish non-irradiated fromirradiated product by inspection.NOTE 5Radiation-sensitive indicators (RSIs), such as

40、 labels, papers,or inks that undergo a color change when exposed to radiation in thepertinent dose range are commercially available. These indicators may beuseful within the irradiation facility as a visual check for determiningwhether or not a product has been exposed to the radiation source. Theya

41、re not dosimeters intended for measuring absorbed dose and must not beused as a substitute for proper dosimetry. Information about dosimetrysystems and the proper use of RSIs is provided in Guides 51261 and51539, respectively.7.5 Plan preparatory operations for irradiation, such as, butnot limited t

42、o, dosimeter placement and reconfiguration ofproduct in the product unit, to permit expeditious handling ofconsecutive batches. These preparatory steps, in addition to theplacement of the product on the transport system and the timerequired for the irradiation treatment contribute to the cumu-lative

43、 time and temperature exposure that will influence theextent of deterioration by chemical or biological mechanismsor the development of microorganisms of public health signifi-cance (see Practices 51204 and 51431, and Guide 51261).7.5.1 The size, shape, and product-loading configuration ofa product

44、unit used to hold product for irradiation are deter-mined largely by certain design parameters of the irradiationfacility. Critical parameters include the characteristics of prod-uct transport systems and of the radiation source as they relateto the dose distribution obtained within the product unit

45、.Pre-determined minimum and maximum dose limits may alsoinfluence the choice of size, shape, and product-loading con-figuration of the product unit.8. Irradiation8.1 Scheduled ProcessIrradiation of food should conformto a scheduled process. A scheduled process for food irradia-tion is a written proc

46、edure that is used to ensure that theabsorbed-dose range and irradiation conditions selected by theradiation processor are adequate under commercial processingconditions to achieve the intended effect on a specific productin a specific facility. The scheduled process should be estab-lished by qualif

47、ied persons having expert knowledge of theirradiation requirements specific for the food and the proces-sors irradiation facility (7).8.2 Radiation SourcesThe sources of ionizing radiationthat may be employed in irradiating food are limited to thefollowing (see Codex Stan 106):8.2.1 Isotopic Sources

48、Gamma rays from the radionu-clides60Co (1.17 and 1.33 MeV) or137Cs (0.66 MeV), and8.2.2 Machine SourcesX-rays and accelerated electrons.NOTE 6The CodexAlimentarius Commission as well as regulations insome countries currently limit the maximum electron energy and nominalX-ray energy for the purpose o

49、f food irradiation (Codex Stan 106).8.3 Absorbed DoseFood irradiation specifications mayinclude minimum and maximum absorbed dose limits. Aminimum absorbed dose may be specified to ensure that theintended effect is achieved, and a maximum absorbed dosemay be based on government regulations resulting from asafety assessment or be stipulated to prevent product degrada-tion. For a given application, one or both of these limits may beprescribed by regulation. It is therefore necessary, prior to theirradiation of product, to establish an irradiation protocol t