ASTM E2420-2015 Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities《放射性污染设施的消除放射性污染后监督和维护的标准指南》.pdf

《ASTM E2420-2015 Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities《放射性污染设施的消除放射性污染后监督和维护的标准指南》.pdf》由会员分享，可在线阅读，更多相关《ASTM E2420-2015 Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities《放射性污染设施的消除放射性污染后监督和维护的标准指南》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E2420 15Standard Guide forPost-Deactivation Surveillance and Maintenance ofRadiologically Contaminated Facilities1This standard is issued under the fixed designation E2420; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revisio

2、n, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This guide outlines a method for developing a Surveil-lance and Maintenance (S facility deacti-vation;

3、nuclear facility; radioactive and hazardous materials;surveillance and maintenanceAPPENDIX(Nonmandatory Information)X1. Related DocumentsX1.1 ASTM Standards:2E1034 Specification for Nuclear Facility Transient WorkerRecordsE1168 Guide for Radiological Protection Training forNuclear WorkersE1281 Guide

4、 for Nuclear Facility Decommissioning PlansE1760 Guide for Unrestricted Disposition of Bulk MaterialsContaining Residual Amounts of RadioactivityX1.2 U.S. Government Regulations:410 CFR 20 Standards for Protection Against Radiation10 CFR 830 Nuclear Safety Rules (QA, SARs, etc.)10 CFR 835 Occupation

5、al Radiation Protection29 CFR 1910.120 Hazardous Waste Operations and Emer-gency Response29 CFR 1910.1096 Ionizing RadiationInternational Atomic Energy Agency (IAEA) DocumentsSafety Report Series No. 26, Safe Enclosure of NuclearFacilities During Deferred DismantlingASTM International takes no posit

6、ion respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibilit

7、y.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM

8、 International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address s

9、hown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-8

10、32-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ from U.S. Government Printing Office Superintendent of Documents,732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401.E2420 154