ASTM E1120-2008 Standard Specification for Liquid Chlorine《液氯的标准规范》.pdf
《ASTM E1120-2008 Standard Specification for Liquid Chlorine《液氯的标准规范》.pdf》由会员分享,可在线阅读,更多相关《ASTM E1120-2008 Standard Specification for Liquid Chlorine《液氯的标准规范》.pdf(2页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: E 1120 08Standard Specification forLiquid Chlorine1This standard is issued under the fixed designation E 1120; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicate
2、s the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.1. Scope*1.1 This specification covers industrial grade chlorine nor-mally available as a liqui
3、d in pressurized metal containers.1.2 The values stated in SI units are to be regarded asstandard. The values given in parentheses are for informationonly.1.3 Review the current Material Safety Data Sheets (MSDS)for detailed information concerning toxicity, first aid proce-dures, handling and safety
4、 precautions.1.4 The following safety hazards caveat pertains only to thetest methods listed in Sections 3 and 4. This standard does notpurport to address all of the safety concerns, if any, associatedwith its use. It is the responsibility of the user of this standardto establish appropriate safety
5、and health practices anddetermine the applicability of regulatory limitations prior touse.2. Referenced Documents2.1 ASTM Standards:2E 410 Test Method for Moisture and Residue in LiquidChlorineE 1746 Test Method for Sampling and Analysis of LiquidChlorine for Gaseous Impurities2.2 Federal Documents:
6、Federal Specification PPP-C-2020A, Chemicals, Liquid,Dry, and Paste, Packaging of (supersedes PPP-C-2020)3Title 49 CFR, Department of Transportation, Parts 100 to1994Title 40 CFR, Protection of the Environment, Parts 162 to1804Title 29 CFR, Labor, Part 1910.1200, New Requirements asto Container Labe
7、ling, Occupational Safety and HealthAdministration (OSHA)43. Chemical Requirements3.1 Liquid chlorine shall conform to the following require-ments:ASTMTest MethodGaseous impurities, %volume (v/v) (% by vol)0.5 max E 1746Moisture, % mass (m/m)(% by weight)0.015 max E 410Nonvolatile material, % mass(m
8、/m) (% by weight)0.015 max E 4104. Sampling4.1 Sample liquid chlorine in accordance with the appropri-ate sections of Test Method E 1746.5. Packaging and Package Marking5.1 Package and label industrial and commercial quantitiesin accordance with Department of Transportation CFR Title 49Part 100 to 1
9、99, and state and local regulations.5.2 When specified, Department of Defense Procurementsshall be packaged and labeled in accordance with the appli-cable paragraphs of Federal Specification PPP-C-2020A.5.3 Label chlorine to be used as a pesticide in accordancewith the applicable regulations of the
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTME11202008STANDARDSPECIFICATIONFORLIQUIDCHLORINE 标准规范 PDF
链接地址:http://www.mydoc123.com/p-527953.html