ASTM D6960 D6960M-2016 1871 Standard Tables for Body Measurements for Plus Womens Figure Type Size Range 14W&x2013 20W《加上女子体型测量后尺寸范围为14W至20W的标准表》.pdf
《ASTM D6960 D6960M-2016 1871 Standard Tables for Body Measurements for Plus Womens Figure Type Size Range 14W&x2013 20W《加上女子体型测量后尺寸范围为14W至20W的标准表》.pdf》由会员分享,可在线阅读,更多相关《ASTM D6960 D6960M-2016 1871 Standard Tables for Body Measurements for Plus Womens Figure Type Size Range 14W&x2013 20W《加上女子体型测量后尺寸范围为14W至20W的标准表》.pdf(11页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: D6960/D6960M 16Standard Tables forBody Measurements for Plus Womens Figure Type, SizeRange 14W20W1This standard is issued under the fixed designation D6960/D6960M; the number immediately following the designation indicates theyear of original adoption or, in the case of revision, the ye
2、ar of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThese body measurement tables were developed from evaluation of data currently used in theapparel industry.These
3、 tables were developed from data published by the U.S. Department of Commerce; the CaesarStudy; the Size USA Study; current U.S. industry; and studies, scans, and documentation fromAlvanon Inc.2These tables take into consideration plus womens figures at a standard height of 165cm 5 ft 5 in. (65 % of
4、 average U.S. population) taking into account the decrease and increase in bodyweight that shift a person from one size to another while this person does not gain in height. Alsoincluded is a definition of body type curvy or straight as applied to waist, high-hip, hip/seat, thigh, andmid-thigh girth
5、s that result in a different body shape (silhouette). Major evaluation was done andreviewing the incremental growth at different major body points has been addressed and definedidentifying increase and decrease at different rates in specific areas: bust, waist, high-hip, and hip/seat.Additionally, t
6、o serve the industry better, incremental movement between sizes was reviewed ensuringsmooth transition between sizes. To verify the proposed body measurements, a three-dimensionalavatar was created in the plus womens size range 14W through 40W (curvy and straight) by AlvanonInc. for a visual referen
7、ce.1. Scope1.1 In these tables, body measurements of adult female pluswomens figure type sizes 14W40W are listed.Although theseare body measurements, they can be used as a baseline indesigning apparel for plus women in this size range whenconsidering such factors as fabric type ease for bodymovement
8、, styling, and fit.1.2 These tables list body measurements for the completerange of plus women sizing.1.3 The values stated in either SI units or inch-pound unitsare to be regarded separately as standard. The values stated ineach system may not be exact equivalents; therefore, eachsystem shall be us
9、ed independently of the other. Combiningvalues from the two systems may result in nonconformancewith the standard.1.4 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate s
10、afety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:3D123 Terminology Relating to TextilesD5219 Terminology Relating to Body Dimensions for Ap-parel Sizing2.2 ISO Standard:ISO 3635 Size Designation of Clothes, D
11、efinitions, andBody Measurement Procedures41These tables are under the jurisdiction of ASTM Committee D13 on Textilesand is the direct responsibility of Subcommittee D13.55 on Body Measurement forApparel Sizing.Current edition approved Oct. 15, 2016. Published November 2016. Originallyapproved in 20
12、04. Last previous edition approved in 2004 as D6960-04 which waswithdrawn January 2013 and reinstated in October 2016. DOI: 10.1520/D6960_D6960M-16.2Caesar: Summary Statistics for the Adult Population (Ages 18-65) of TheUnited States Of America, June 2002; Size USA North America Sizing Survey,2004;
13、2000 CDC Growth Charts for the United States: Methods and Development,National Center for Health Statistics, Vital Health Stat, Series 11, No. 246, 2002;CDC Advance Data No. 361, 7/5/2005; and Anthropometry of Infants, Childrensand Youths to Age 18 for Product Safety Design, May 31, 1977.3For refere
14、nced ASTM Standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandardsvolume information refer to the standards Document Summary page onthe ASTM website.4Available from American National Standards Institute (ANSI), 25 W. 43rd S
15、t.,4th Floor, New York, NY 10036, http:/www.ansi.org.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States13. Terminology3.1 DefinitionsFor definitions relating to bodydimensions, refer to Terminology D5219. For definitions ofother textile
16、terms used in these tables, refer to TerminologyD123.4. Significance and Use4.1 The use of the body measurement information in Table1 and Table 2 will assist manufacturers in developing patternsand garments that are consistent with the current anthropomet-ric characteristics of the population of int
17、erest. This practiceshould, in turn, reduce or minimize consumer confusion anddissatisfaction related to apparel sizing. (Also refer to ISO3635.)4.2 Three-dimensional (3-D) avatars depicting each of theplus womens sizes and subcategory curvy and straight oncertain measures, were created by Alvanon,
18、Inc. and includedin this standard to assist manufacturers in visualizing theposture, shape, and proportions generated by the measurementscharts in Figures 16.5. Apparatus5.1 Tape Measure, dimensionally stable and approximately1.5 cm 12 in. wide and graduated accurately in centimetres116 in.5.2 Plast
19、ic Goniometry, to measure the radian (degree) ofshoulder slope.5.3 Scale, standard, calibrated, body weight type.5.4 Metal Ruler.6. Procedure6.1 General:6.1.1 For all vertical and most horizontal measurements, thesubject is to be standing erect without shoes and with feetapproximately 15cm 6 in. apa
20、rt.6.1.2 Take measurements over regular undergarments nor-mally worn.6.1.3 Take all measurements from the same side of the bodyfor consistency.6.1.4 Refer to Terminology D5219 for the location of allpoints to be measured.6.2 Body MeasurementsA body measurement is a stan-dardized distance between two
21、 specified points on the humananatomy.NOTE 1Body measurements generally are based on standardizedvalues from statistical studies of large populations.6.2.1 Body WeightThe weight as measured on a calibratedscale taken with the subject in undergarments.6.2.2 Head GirthMeasure the maximum horizontal ci
22、r-cumference of the head above the ears.6.2.3 Neck Base GirthMeasure the circumference of theneck taken over the cervicale at the back and the top of thecollarbone at the front.6.2.4 Mid-Neck GirthMeasure the horizontal circumfer-ence of the neck taken approximately 25 mm (1 in.) above theneck base
23、level.6.2.5 Shoulder GirthMeasure the horizontal circumfer-ence around the shoulders taken at the front breakpoint levelwith the arms down.6.2.6 Upper Chest/Bust GirthMeasure the horizontal cir-cumference around the torso taken under the arms and abovethe fullest part of the chest/bust including the
24、 lower portion ofthe shoulder blades.6.2.7 Chest/Bust GirthMeasure the horizontal circumfer-ence around the torso taken under the arms and across thefullest part of the chest/bust apex including the lower portion ofthe shoulder blades.6.2.8 Under Chest/Bust GirthMeasure the horizontal cir-cumference
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMD6960D6960M20161871STANDARDTABLESFORBODYMEASUREMENTSFORPLUSWOMENSFIGURETYPESIZERANGE14WX201320W 加上

链接地址:http://www.mydoc123.com/p-524092.html