ASTM B224-2015 Standard Classification of Coppers《铜的标准分类》.pdf
《ASTM B224-2015 Standard Classification of Coppers《铜的标准分类》.pdf》由会员分享,可在线阅读,更多相关《ASTM B224-2015 Standard Classification of Coppers《铜的标准分类》.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: B224 14B224 15Standard Classification ofCoppers1This standard is issued under the fixed designation B224; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the
2、 year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope*1.1 This is a classification of the various types of copper currently available in refinery shapes and wrought products incommercial quantities. It is not a specification fo
3、r the various types of copper.1.2 In this classification, use is made of the standard copper designations in use by the copper industry.1.3 Although this classification includes certain UNS designations as described in Practice E527, these designations are forcross-reference only and are not require
4、ments. Therefore, in case of conflict, this ASTM classification shall govern.1.4 This classification does not attempt to differentiate between all compositions that could be termed either coppers orcopper-base alloys, but in conformance with general usage in the trade, includes those coppers in whic
5、h the copper plus specificpermitted elements is specified as 99.85 % or more, silver being counted as copper.NOTE 1Coppers may contain small amounts of certain elements intentionally permitted to impart specific properties, without excessively loweringelectrical conductivity. The total copper plus s
6、pecific permitted elements is usually specified as 99.85 % or more. These intentionally permitted elementsnormally include, but are not limited to, arsenic, cadmium, chromium, lead, magnesium, silver, sulfur, tellurium, tin, zinc, and zirconium, plusdeoxidizers, up to specific levels adopted by the
7、International Standards Organization.2. Referenced Documents2.1 ASTM Standards:2E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)B846 Terminology for Copper and Copper Alloys3. Terminology3.1 This classification covers definitions specific to this document and in co
8、njunction with Terminology B846.3.2 Definitions of Terms Specific to This Standard:3.2.1 sulfur-bearing coppercopper alloy containing a specified amount of sulfur (C14700).3.2.2 tellurium-bearing coppercopper alloy containing a specified amount of tellurium (C14500).3.2.3 wirea solid section, includ
9、ing rectangular flat wire but excluding other flat products, furnished in coils or on spools,reels, or bucks.3.2.4 zirconium-bearing coppercopper alloy containing a specified amount of zirconium (C15000).4. Significance and Use4.1 This classification lists the types of copper available from refineri
10、es or fabricators, or both, defines the common terms used,and gives the characteristics of many of the coppers available. It is useful to the neophyte looking for the appropriate copper fora particular application.5. Basis of Classification5.1 Table 1 lists the standard designations, and the refiner
11、y shapes and fabricators products currently produced. The listedcoppers are not necessarily available in the complete range of sizes in the form shown, nor from any one supplier in all forms.1 This classification is under the jurisdiction of ASTM Committee B05 on Copper and Copper Alloysand is the d
12、irect responsibility of Subcommittee B05.07 on RefinedCopper.Current edition approved July 1, 2014May 1, 2015. Published July 2014September 2015. Originally approved in 1948. Last previous edition approved in 20102014 asB224 10.B224 14. DOI: 10.1520/B0224-14.10.1520/B0224-15.2 For referencedASTM sta
13、ndards, visit theASTM website, www.astm.org, or contactASTM Customer Service at serviceastm.org. For Annual Book of ASTM Standardsvolume information, refer to the standards Document Summary page on the ASTM website.This document is not an ASTM standard and is intended only to provide the user of an
14、ASTM standard an indication of what changes have been made to the previous version. Becauseit may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current versionof the standard as publish
15、ed by ASTM is to be considered the official document.*A Summary of Changes section appears at the end of this standardCopyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States15.2 ExistingASTM specifications for refinery copper and for wrought
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMB2242015STANDARDCLASSIFICATIONOFCOPPERS 标准 分类 PDF

链接地址:http://www.mydoc123.com/p-460668.html