ARMY MIL-C-11136 A-1955 CANDLE SMOKE OIL SGF2 M6 COMPONENTS FOR《M6 SGF2油烟雾罐组件》.pdf

《ARMY MIL-C-11136 A-1955 CANDLE SMOKE OIL SGF2 M6 COMPONENTS FOR《M6 SGF2油烟雾罐组件》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-C-11136 A-1955 CANDLE SMOKE OIL SGF2 M6 COMPONENTS FOR《M6 SGF2油烟雾罐组件》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-C-LLL3bA 13 W 77977060273377 2 M MIL-C -11136A( CmlC) 3. REQUIREMENTS 3,l Material. - All materials used in the manufacture and assembly of the components shall conform to the specifications and dra

2、wings forming a part of this specification. 3.2 Manufacture and assembly. - The components shall be manufactured and assembled as specified on the subsidiary drawings listed on Drawing D11-18-2. 3.3 Top assembly. - The top assembly shall conform to Specification MIL-B-1353. 3.4 Body assembly. - The

3、body shall conform to Specification MIL-B-1353. 3.5 Compartment assembly leakage, - The compartment assembly, Drawing B11-9-62 which is listed on Drawing D11-18-2, shall not leak when tested as specified in 4.4. 3.6 Workmanship. - Workmanship shall be of such a nature that, when proper procedure is

4、followed, the components are free from any damage, defects, or contamination which, due to their nature, degree, or extent, detrimentally affect the appearance or suitability of the intended use. 4. QUALITY ASSURANCE PROVISIONS 4.1 Lot. 4.1.1 Pilot. - Prior to the start of regular production and fol

5、lowing any change in regular production methods, materials, or equipment, a pilot lot of like components sufficient to assemble 200 smoke candles shall be produced using the same methods, materials, and equipment as will be employed during regular pro- duction. 4,l. 2 Regular production, - A regular

6、 production lot shall consist of the components produced by one manufacturer from the same materials, and under essentially the same manufacturing conditions, The inspectionlot for non-destructive inspection, within the above limitations, shall be designated by the inspector. 4.2 Sampling for nondes

7、tructive inspection. 4.2.1 Pilot lot. - Each component in each pilot lot shall be inspected in ac- cordance with the applicable drawing and specification requirements. 4.2.2 Regular production lot. - Sampling shall be conducted in accordance with the classification of defects (4.3.3) and Standard MI

8、L-STD-105, 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-* la. Major * 1. 2. 3. 4. 5. *6. *7. *8. 9. 10. Minor 5 1. *52. Provided by IHSNot for Resa

9、leNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-C-LLL3bA 13 777770b 0273L1.03 O m MIL-C - 11136A(CmlC) Patent notice. - When Government drawings, specifications, or other dat

10、a are used for any purpose other than in connection with a definitely related Government procurement operation, the United States Government thereby incurs no responsibility aor any obligation whatsoever; and the fact that the Government may have formulated, furnished, or in any way supplied the sai

11、d drawings, specifications, or other data is not to be regarded by implication or otherwise as in any manner licensing the holder or any other person or corporation, or conveying any rights or permission to manu- facture, use, or sell any patented invention that may in any way be related thereto. Custodian: Army - Chemical Corps Other interest: Army - M Air Force Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-