ANSI UL 62841-2-14-2016 UL Standard for Safety Electric Motor-Operated Hand-Held Tools Transportable Tools And Lawn And Garden Machinery C Safety C Part 2-14 Particular Requirement.pdf

《ANSI UL 62841-2-14-2016 UL Standard for Safety Electric Motor-Operated Hand-Held Tools Transportable Tools And Lawn And Garden Machinery C Safety C Part 2-14 Particular Requirement.pdf》由会员分享，可在线阅读，更多相关《ANSI UL 62841-2-14-2016 UL Standard for Safety Electric Motor-Operated Hand-Held Tools Transportable Tools And Lawn And Garden Machinery C Safety C Part 2-14 Particular Requirement.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 62841-2-14 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-14: Particular Requirements For Hand-Held Planers STANDARD FOR SAFETYUL COPYR

2、IGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Law

3、n And Garden Machinery Part 2-14: Particular Requirements For Hand-Held Planers, UL 62841-2-14 First Edition, Dated August 12, 2016 Summary of Topics Adoption Of The First Edition Of IEC 62841-2-14, Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machine

4、ry Safety Part 2-14: Particular Requirements for Hand-Held Planers, As The First Edition Of UL 62841-2-14 This standard is an adoption of IEC 62841-2-14, Edition 1, published by the IEC June 2015. There are no technical national differences for this standard. The new requirements are substantially i

5、n accordance with Proposal(s) on this subject dated March 18, 2015. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL.

6、UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, includin

7、g loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price pa

8、id for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any

9、error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. AUGUST 12, 2016 UL 62841-2-14 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL AUGUST 12, 2016 UL 62841-2-14 tr2 No Text on

10、This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group CAN/CSA-C22.2 No. 62841-2-14:16 First Edition (IEC 62841-2-14:2015) Underwriters Laboratories Inc. UL 62841-2-14 First Edition Electric Motor-Operated Hand-Held Tools, Transp

11、ortable Tools And Lawn And Garden Machinery Safety Part 2-14: Particular Requirements For Hand-Held Planers August 12, 2016 This national standard is based on publication IEC 62841-2-14 First Edition (2015). ANSI/UL 62841-2-14-2016 Approved byUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPROD

12、UCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”) and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CS

13、A Group or UL at any time. Revisions to this standard will be made only after processing according to the standards development procedures of CSA Group and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue.

14、 ISBN 978-1-4883-0484-2 2016 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review ve years from the date of publication, and suggestions for its improvement will be referr

15、ed to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rational

16、e for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2016 Underwriters Laboratories Inc. Comments or proposals for revisions on any part of the Standard may be submitted to

17、 UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. This ANSI/UL Standard for Safety consists of the First Edition. The most recent designation of ANSI/UL 62841-2-14 as an American National Standard (ANSI)

18、occurred on August 12, 2016. The ANSI approval for this standard does not include the Cover Page, Transmittal Pages, Title Page, Preface Page, National Difference Page or IEC Foreword. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals shoul

19、d be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION

20、FROM UL CONTENTS Preface .5 NATIONAL DIFFERENCES .7 FOREWORD 8 1 Scope 11 2 Normative references .11 3 Terms and denitions 11 4 General requirements 11 5 General conditions for the tests 11 6 Radiation, toxicity and similar hazards 12 7 Classication 12 8 Marking and instructions 12 9 Protection agai

21、nst access to live parts 13 10 Starting 13 11 Input and current .13 12 Heating 13 13 Resistance to heat and re 13 14 Moisture resistance .13 15 Resistance to rusting 13 16 Overload protection of transformers and associated circuits 13 17 Endurance .13 18 Abnormal operation .13 19 Mechanical hazards

22、.14 19.111 Lift-off device 16 20 Mechanical strength .16 21 Construction .17 22 Internal wiring 17 23 Components .17 24 Supply connection and external exible cords 17 25 Terminals for external conductors .17 26 Provision for earthing 17 27 Screws and connections .17 28 Creepage distances, clearances

23、 and distances through insulation 17 Annexes Annex I (informative) Measurement of noise and vibration emissions I.2 Noise test code (grade 2) 22 I.2.4 Installation and mounting conditions of the power tools during noise tests .22 I.2.5 Operating conditions 22 I.3 Vibration .23 I.3.3.2 Location of me

24、asurement 23 I.3.5.3 Operating conditions 23 I.3.6.2 Declaration of the vibration total value .23 AUGUST 12, 2016 CAN/CSA-C22.2 NO. 62841-2-14:16 UL 62841-2-14 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annex K (normative) Battery tool

25、s and battery packs Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources Bibliography AUGUST 12, 2016 CAN/CSA-C22.2 NO. 62841-2-14:16 UL 62841-2-14 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSIO

26、N FROM UL Preface This is the harmonized CSA Group and UL Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-14: Particular Requirements for Hand-Held Planers. It is the First edition of CAN/CSA-C22.2 No. 62841-2-14 and the First edi

27、tion of UL 62841-2-14. This harmonized standard is based on IEC Publication 62841-2-14: First edition Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-14: Particular Requirements for Hand-Held Planers issued June 2015. IEC publicat

28、ion 62841-2-14 is copyrighted by the IEC. Note: At the time of publication, 62841-2-14:2015 is available from IEC in English only. CSA will publish the French version when it becomes available from IEC. This harmonized standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The e

29、fforts and support of the International Harmonization Committee (IHC) for the adoption of the IEC series of standards for Hand-Held, Motor-Operated, and Transportable Tools and Lawn and Garden Machinery UL are gratefully acknowledged. This standard is considered suitable for use for conformity asses

30、sment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Safety of Hand-Held Motor-Operated Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements f

31、or Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved as a National Standard of Canada by the Standards Council of Canada (SCC). This standard has been approved by the American National Standards Institute (ANSI) as an American National

32、Standard. Application of Standard Where reference is made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the respon

33、sibility of the users of the standard to judge its suitability for their particular purpose. This CAN/CSA-C22.2 No. 62841-2-14, Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-14: Particular Requirements for Hand-Held Planers is t

34、o be used in conjunction with the First edition of CAN/CSA-C22.2 No. 62841-1. The requirements for hand-held planers are contained in this Part 2 Standard and CAN/CSA-C22.2 No. 62841-1. Requirements of this Part 2 Standard, where stated, amend the requirements of CAN/CSA-C22.2 No. 62841-1. Where a p

35、articular subclause of CAN/CSA-C22.2 No. 62841-1 is not mentioned in CAN/CSA-C22.2 No. 62841-2-14, the CAN/CSA-C22.2 No. 62841-1 subclause applies. AUGUST 12, 2016 CAN/CSA-C22.2 NO. 62841-2-14:16 UL 62841-2-14 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT P

36、ERMISSION FROM UL This UL 62841-2-14 Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-14: Particular Requirements for Hand-Held Planers, is to be used in conjunction with the First edition of UL 62841-1. The requirements for hand-h

37、eld planers are contained in this Part 2 Standard and UL 62841-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 62841-1. Where a particular subclause of UL 62841-1 is not mentioned in UL 62841-2-14, the UL 62841-1 subclause applies. Level of harmonization This stan

38、dard adopts the IEC text with editorial national differences. This standard is published as an equivalent standard for CSA Group and UL. An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes a

39、nd governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technological, or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Prese

40、ntation is word for word except for editorial changes. All national differences from the IEC text are included in the CSA Group and UL versions of the standard. While the technical content is the same in each organizations version, the format and presentation may differ. Reasons for Differences From

41、 IEC National Differences from the IEC are being added in order to address safety and regulatory situations present in the US and Canada. Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine comp

42、liance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately re

43、ect the intent. IEC Copyright For CSA Group, the text, gures, and tables of International Electrotechnical Commission Publication IEC 62841-2-14 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-14: Particular Requirements for Hand-Held Planers,

44、 copyright 2015, are used in this standard with the consent of the International Electrotechnical Commission. The IEC Foreword is not a part of the requirements of this standard but is included for information purposes only. For UL, the text, gures and tables of IEC publication IEC 62841-2-14, Stand

45、ard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-14: Particular Requirements for Hand-Held Planers, copyright 2015 are used in this standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyr

46、ighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword is not a part of the requirements of this standard but is included for information purposes only. Copies of IEC Publication IEC 6284

47、1-2-14 may be purchased from ANSI, 25 West 43rd Street, 4th Floor, New York, New York, 10036, (212) 642- 4900. AUGUST 12, 2016 CAN/CSA-C22.2 NO. 62841-2-14:16 UL 62841-2-14 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCE

48、S National Differences from the text of International Electrotechnical Commission (IEC) Publication IEC 62841-2-14, Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-14: Particular Requirements for Hand-Held Planers) copyright 2015 are indicated

49、 by notations (differences) and are presented in bold text. The national difference type is included in the body. There are ve types of National Differences as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these National Differences. DR These are National Differences based on the national regulatory requirements. D1 Thes