ANSI TIA-472F000-2005 Sectional Specification (Adopted ICEA S-110-717-2003) Standard for Optical Fiber Drop Cable.pdf

《ANSI TIA-472F000-2005 Sectional Specification (Adopted ICEA S-110-717-2003) Standard for Optical Fiber Drop Cable.pdf》由会员分享，可在线阅读，更多相关《ANSI TIA-472F000-2005 Sectional Specification (Adopted ICEA S-110-717-2003) Standard for Optical Fiber Drop Cable.pdf（72页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA STANDARD Sectional Specification (Adopted ICEA S-110-717-2003) Standard for Optical Fiber Drop Cable TIA-472F000 February 2005 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance ANSI/TIA-472FOOO-2005 Approv

2、ed: January 21, 2005 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtai

3、ning with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existen

4、ce of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liab

5、ility to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standar

6、d to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-0147, formulated under the cognizance of the TIA FO-4.2Subcommittee on Optical Fibers and Cables). Published by TELECOMMUNICATIONS INDUST

7、RY ASSOCIATION 2004 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179)

8、International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHTThis document is copyrightedby the TIA and ICEA.Reproduction of these documents either in hard copy or soft copy (includingposting on the web

9、) is prohibited without copyright permission. For copyrightpermission to reproduce portions of this document, please contact TIA StandardsDepartment or go to the TIA website (www.tiaonline.org) for details on how torequest permission. Details are located at:http:/www.tiaonline.org/about/faqDetail.cf

10、m?id=18ORTelecommunications Industry AssociationStandards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process.

11、 The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent a

12、pplications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neithe

13、r be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested

14、or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the co

15、ntents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS I

16、NTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PROD

17、UCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCID

18、ENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING

19、 NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ICEA S-110-717-2003ANSI/TIA-472F000iFOREWORDICEA Standards are adopted in the public interest and are designed to eliminatemisunderstanding betw

20、een the manufacturer and user and to assist the user in selectingand obtaining proper products for a particular need. The existence of an ICEA Standarddoes not in any respect preclude the manufacture or use of products not conforming tothis Standard.The user of this Standard is cautioned to observe

21、any applicable health or safetyregulations and rules relative to the manufacture and use of cable made in conformitywith this Standard. This Standard hereafter assumes that only properly trained personnelusing suitable equipment will manufacture, test, install and/or perform maintenance oncables def

22、ined by this Standard.The Secretary can only accept questions of interpretation of ICEA Standards in writing atHeadquarters at the address below, and the reply shall be provided in writing.Suggestions for improvements in this Standard are welcome. Questions andsuggestions shall be sent to:SecretaryI

23、nsulated Cable Engineers Association, Inc.Post Office Box 1568Carrollton, GA 30112, U.S.AUnited States of AmericaThis Standard was approved by ICEA on June 5, 2003. This Standard was adopted byTIA as ANSI/TIA-472C000-B in September 2004. This Standard was approved by TheAmerican National Standards I

24、nstitute (ANSI) on January 21, 2005. The members ofthe ICEA Communications Cable Division, Working Group 717 who participated in thisproject were:Ken Chauvin, ChairmanV. Anyanwu D. K. Baker G. L. Dorna M. D. KinardR. Lovie N. Jones V. Osornio W. T. PoseyT. Rhoades J. Rosko M. Silva J. SmithJ. Shinos

25、ki D. Taylor J. D. Coleman J. StruharICEA S-110-717-2003ANSI/TIA-472F000iiThis page blank.ICEA S-110-717-2003ANSI/TIA-472F000iiiTABLE of CONTENTSSECTION PAGEPart 1: INTRODUCTION 11.1 Scope 11.2 General 31.3 Units 41.4 Definitions 41.5 References. 51.6 Information to Be Supplied by the User. 51.7 Mod

26、ification of this Standard . 51.8 Quality Assurance 61.9 Fire Resistance Codes 61.10 Safety Considerations 6Part 2: OPTICAL FIBERS 72.1 General 72.2 Optical Fiber Classes. 72.3 Optical Fiber Requirements. 72.4 Optical Fiber Coating and Requirements 7Part 3: OPTICAL FIBER CORE UNITS 93.1 General 93.2

27、 Loose Buffer Tubes . 93.3 Optical Fiber Ribbons 93.4 Tight Buffer .11Part 4: CABLE ASSEMBLY, FILLERS, STRENGTH MEMBERS, ANDFIBER AND UNIT IDENTIFICATION 124.1 Cabling of Multi-Fiber Optical Fiber Cables124.2 Identification of Fibers within a Unit 124.3 Identification of Units within a Cable.124.4 S

28、trength Members 124.5 Assembly of Cables 134.6 Filling and Flooding Materials.13ICEA S-110-717-2003ANSI/TIA-472F000ivSECTION PAGEPart 5: COVERINGS 155.1 Binders155.2 Shielding, Armoring, or Other Metallic Coverings.155.3 Jackets175.4 Other Coverings175.5 Jacket Repairs 185.6 Ripcords18Part 6: OTHER

29、REQUIREMENTS 196.1 Identification and Date Marking 196.2 Optical Cable Identification and Other Markings 196.3 Length Marking .206.4 Cable Remarking 216.5 Packaging and Marking 21Part 7: TESTING AND TEST METHODS 237.1 Testing 237.2 Extent of Testing.237.3 Standard Test Conditions .237.4 Testing of C

30、onductive Wires in Composite Optical Drop Cables.247.5 Verification of Physical Construction, Color Code, andIdentification247.6 Environmental Stress Cracking Resistance Test .247.7 Jacket Shrinkage Test 257.8 Weathering Test257.9 Verification of Cable Length and Marking Accuracy.267.10 Dimensions o

31、f Fibers, Tight Buffered Fibers, and Buffer Tubes 267.11 Ribbon Dimensions.277.12 Ribbon Separability Test.277.13 Ribbon Twist Test .297.14 Ribbon Residual Twist Test297.15 Tight Buffer Strippability Test307.16 Material Compatibility and Cable Aging Test307.17 Cable Low and High Temperature Bend Tes

32、t317.18 Cable External Freezing Test .327.19 Compound Flow (Drip) Test327.20 Cable Temperature Cycling Test327.21 Cable Cyclic Flexing Test .337.22 Cable Impact Test.337.23 Cable Cold Impact Test Fire Resistant Cables Only.347.24 Cable Tensile Loading, Bending and Fiber Strain Test347.25 Cable Compr

33、essive Loading Test 367.26 Cable Twist Test .37ICEA S-110-717-2003ANSI/TIA-472F000vSECTION PAGEPart 7: TESTING AND TEST METHODS (continued)7.27 Cable Sheath Adherence Test .377.28 Cable Water Penetration Test 387.29 Cable Fire Resistance 387.30 Cable Lightning Damage Susceptibility Test (Optional).3

34、87.31 Shield Heating Test (Optional)38Part 8: FINISHED CABLE OPTICAL PERFORMANCE REQUIREMENTS 408.1 Optical Performance .408.2 Attenuation Coefficient418.3 Multimode Optical Bandwidth .428.4 Measurement of Optical Point Discontinuities428.5 Cable Cutoff Wavelength Measurement (Single-Mode Fibers)43P

35、art 9: REFERENCES 44ASQ 44ASTM 44CSA 44ICEA 44IEEE 44IEC 45ISO 45NFPA 45NMX-J-237-1997-NYCE 45TIA/EIA.45ANNEXESANNEX A ORDERING INFORMATION . A-1ANNEX B MULTIMODE RML BANDWIDTH INFORMATION. B-1ANNEX C AERIAL DROP CABLE CONSIDERATIONS C-1ANNEX D FUSING COORDINATION TEST D-1ANNEX E ICEA TELECOMMUNICAT

36、IONS CABLE STANDARDS E-1ICEA S-110-717-2003ANSI/TIA-472F000viTABLESTable 1-1 Cable Normal Temperature Ranges. 2Table 2-1 Optical Fiber Specification Requirements - Multimode Fiber . 8Table 2-2 Optical Fiber Specification Requirements - Single-Mode Fiber 8Table 4-1 Individual Fiber, Unit and Group Id

37、entification.13Table 6-1 Year of Manufacture Marker Threads20Table 7-1 Maximum Dimensions of Optical Fiber Ribbons .27Table 8-1 Attenuation Coefficient Performance Requirements .40Table 8-2 Multimode Bandwidth Coefficient Performance Requirements.40Table 8-3 Point Discontinuity Acceptance Criteria.4

38、0Table 8-4 Optical Attenuation Measurement Methods 41FIGURESFigure 7-1 Ribbon Dimensional Parameters.27Figure 7-2 Ribbon Preparation28Figure 7-3 Ribbon Separation 28ICEA S-110-717-2003ANSI/TIA-472F0001ICEA STANDARDFOROPTICAL FIBER DROP CABLEPART 1INTRODUCTION1.1 Scope1.1.1 GeneralThis Standard cover

39、s optical fiber communications cables intended for use in outdoor andindoor/outdoor optical fiber drop applications. Materials, construction, and performancerequirements are included in this Standard, together with applicable test procedures.Refer to ICEA S-104-696 for optical fiber communications c

40、ables intended for use in othercombined indoor/outdoor applications, and to ICEA S-87-640 for optical fibercommunication cables intended for use in other outdoor applications. Refer to ICEAS-83-596 for optical fiber communications cables intended only for indoor use.1.1.2 Applications SpaceProducts

41、covered by this Standard are intended for operation under conditions normallyencountered in the last portion of all-optical networks. This space exists from the NetworkAccess Point (NAP), or other hardware serving that purpose, ending at or inside thesubscriber premises. These products convey commun

42、ications signals (voice, video, anddata) between the communications network and the subscriber premises. Productscovered by this Standard may be factory-terminated with connectors or othertelecommunications hardware as appropriate.For the purposes of this Standard, user premises are defined as resid

43、ential properties andsmall to medium sized businesses located in facilities that can be served by an opticalcable having 12 or fewer fibers, with typical distances less than or equal to 100 m (300 ft)in length. Most applications will only require cables with four or fewer fibers. Productscovered by

44、this Standard are not intended for use in extended distance applications, whichare typically characterized by higher fiber count cables and which specify more stringentdesign and performance requirements. The suitability of products covered by thisStandard in applications other than those for which

45、they are intended should be as agreedupon between the manufacturer and user.1.1.3 Temperature RangesThe normal temperature ranges for cables covered by this Standard are given inTable 1-1.ICEA S-110-717-2003ANSI/TIA-472F0002Table 1-1Cable Normal Temperature RangesOutdoor CableIndoor/Outdoor Cable(fi

46、re-resistant)C F C FOperation -40 to +70 (-40 to +158) -40 to +70 (-40 to +158)Storage and Shipping -40 to +70 (-40 to +158) -40 to +70 (-40 to +158)Installation -30 to +60 (-22 to +140) -10 to +60 (+14 to +140)1.1.4 Tensile RatingFor the purposes of this document, the standard tensile rating repres

47、ents the maximumallowable installation load for the cable. The standard tensile ratings for products coveredby this Standard are 1335 N (300 lbf) for cables designed for installation by pulling, and440 N (100 lbf) for cables that are direct-buried, placed in the ground by trenchingequipment, or blow

48、n into ducts. The residual load is defined as a load equivalent to 30 %of the standard tensile rating, as related to all cable designs except aerial self-supporting.For self-supporting aerial applications there may be additional considerations, based onthe particular application, which need to be ad

49、dressed to ensure that the cable design isappropriate for the self-supporting distance (typically 30 m 100 ft or less) andenvironmental loading requirements. See Paragraph 7.24 and Annex C for informationon aerial plant requirements and considerations.For aerial applications in which the drop cable is lashed to a separate messenger wire,the use of a cable designed for installation by direct burial, trenching, or pulling into ductmay be adequate.1.1.5 Minimum Bend DiameterThe standard minimum bend diameters for cables covered by this Standar