ANSI ESTA E1.27-2-2009 Entertainment Technology Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512 1990 Products (For.pdf

《ANSI ESTA E1.27-2-2009 Entertainment Technology Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512 1990 Products (For.pdf》由会员分享，可在线阅读，更多相关《ANSI ESTA E1.27-2-2009 Entertainment Technology Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512 1990 Products (For.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、 ANSI E1.27-2 2009 (R2014) Entertainment Technology Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products Document number CP/2006-1011r5.1a This document was approved as an American National Standard by the ANSI Board of Stand

2、ards Review on 9 June 2014. It is a reaffirmation of the 2009 edition, CP/2006-1011r5.1. This standard was originally published when the Entertainment Services and Technology Association was operating under the name of PLASA North America. ESTA has reverted to its original name, and this document ha

3、s been rebranded with the current corporate name and logo. No changes have been made to the contents of the standard. 2017 ESTA intentionally blank page ANSI E1.27-2 - 2009 (R2014) Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990

4、Products 2017 ESTA i CP/2006-1011r5.1a NOTICE and DISCLAIMER ESTA does not approve, inspect, or certify any installations, procedures, equipment or materials for compliance with codes, recommended practices or standards. Compliance with a ESTA standard or an American National Standard developed by E

5、STA is the sole and exclusive responsibility of the manufacturer or provider and is entirely within their control and discretion. Any markings, identification or other claims of compliance do not constitute certification or approval of any type or nature whatsoever by ESTA. ESTA neither guarantees n

6、or warrants the accuracy or completeness of any information published herein and disclaims liability for any personal injury, property or other damage or injury of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication,

7、use of, or reliance on this document. In issuing and distributing this document. In issuing this document, ESTA does not either (a) undertake to render professional or other services for or on behalf of any person or entity, or (b) undertake any duty to any person or entity with respect to this docu

8、ment or its contents. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstance. Published by: Entertainment Services and Technology Associatio

9、n 630 Ninth Avenue, Suite 609 New York, NY 10036 USA Phone: 1-212-244-1505 Fax: 1-212-244-1502 standardsesta.org ANSI E1.27-2 - 2009 (R2014) Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products 2017 ESTA ii CP/2006-1011r5.1a

10、The ESTA Technical Standards Program The ESTA Technical Standards Program was created to serve the ESTA membership and the entertainment industry in technical standards related matters. The goal of the Program is to take a leading role regarding technology within the entertainment industry by creati

11、ng recommended practices and standards, monitoring standards issues around the world on behalf of our members, and improving communications and safety within the industry. ESTA works closely with the technical standards efforts of other organizations within our industry, including USITT and VPLT, as

12、 well as representing the interests of ESTA members to ANSI, UL, and the NFPA. The Technical Standards Program is accredited by the American National Standards Institute. The Technical Standards Council (TSC) was established to oversee and coordinate the Technical Standards Program. Made up of indiv

13、iduals experienced in standards-making work from throughout our industry, the Council approves all projects undertaken and assigns them to the appropriate working group. The Technical Standards Council employs a Technical Standards Manager to coordinate the work of the Council and its working groups

14、 as well as maintain a “Standards Watch” on behalf of members. Working groups include: Control Protocols, Electrical Power, Floors, Fog and Smoke, Followspot Position, Photometrics, Rigging, and Stage Lifts. ESTA encourages active participation in the Technical Standards Program. There are several w

15、ays to become involved. If you would like to become a member of an existing working group, as have over four hundred people, you must complete an application which is available from the ESTA office. Your application is subject to approval by the working group and you will be required to actively par

16、ticipate in the work of the group. This includes responding to letter ballots and attending meetings. Membership in ESTA is not a requirement. You can also become involved by requesting that the TSC develop a standard or a recommended practice in an area of concern to you. The Control Protocols Work

17、ing Group, which authored this Standard, consists of a cross section of entertainment industry professionals representing a diversity of interests. ESTA is committed to developing consensus-based standards and recommended practices in an open setting. ANSI E1.27-2 - 2009 (R2014) Recommended Practice

18、 for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products 2017 ESTA iii CP/2006-1011r5.1a Contact Information Technical Standards Manager Karl G. Ruling Entertainment Services and Technology Association 630 Ninth Avenue, Suite 609 New York, NY 10036

19、USA 1-212-244-1505 karl.rulingesta.org Assistant Technical Standards Manager Erin Grabe Entertainment Services and Technology Association 630 Ninth Avenue, Suite 609 New York, NY 10036 USA 1-212-244-1505 erin.grabeesta.org Technical Standards Council Chairpersons Mike Garl Mike Garl Consulting LLC 1

20、-865-389-4371 Mike Wood Mike Wood Consulting LLC 1-512-288-4916 Control Protocols Working Group Chairperson Michael Lay Philips Color Kinetics 3 Burlington Woods Drive Burlington, MA 01803 USA 1-781-418-9145 ANSI E1.27-2 - 2009 (R2014) Recommended Practice for Permanently Installed Control Cables

21、 for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products 2017 ESTA iv CP/2006-1011r5.1a Acknowledgments The Control Protocols Working Group members when this document was approved by the working group on 1 May 2014 are shown below. Voting members: Daniel W. Antonuk; Electronic Theatre Cont

22、rols, Inc.; MP Robert Bell; Acuity Brands Inc.; MP Marcus Bengtsson; LumenRadio AB; MP Scott M. Blair; Full Throttle Films/ VER; DR Milton Davis; Doug Fleenor Design, Inc.; MP Casey Diers; DesignLab Chicago, Inc.; DR Gary Douglas; Acuity Brands Inc.; MP Doug Fleenor; Doug Fleenor Design, Inc.; MP Ho

23、ward Forryan; Harting KGAA; G Garrett Gallant; Acuity Brands Inc.; MP Ed Garstkiewicz; Harting KGAA; G Robert Goddard; Goddard Design Co.; MP Dennis Grow; I.A.T.S.E. Local 728; U Mitch Hefter; USITT; U Jeremy Hochman; Full Throttle Films/ VER; DR John Huntington; I.A.T.S.E. Local 1; U Tyrone Mellon_

24、Jr.; Lex Products Corp.; CP Michael Karlsson; LumenRadio AB; MP Hyun Jong Kim; Electronics and Telecommunications Research Institute; G Peter Kirkup; LumenRadio AB; MP Paul Kleissler; City Theatrical, Inc.; MP Edwin S. Kramer; I.A.T.S.E. Local 1; U Ulrich Kunkel; DIN, NVBF Committee; U Roger Lattin;

25、 I.A.T.S.E. Local 728; U Hans Lau; LumenRadio AB; MP Michael Lay; Royal Philips; MP Sang-Kyu Lim; Electronics and Telecommunications Research Institute; G Joshua Liposky; Lex Products Corp.; CP Kevin Loewen; Acuity Brands Inc.; MP Simon Newton; Open Lighting Project; G Maya Nigrosh; Electronic Theat

26、re Controls, Inc.; MP Philip Nye; Acuity Brands Inc.; MP Kimberly Corbett Oates; Schuler Shook; DE Edward A. (Ted) Paget; Daktronics Inc. ; G Jason Potterf; Cisco; MP Charles Reese; Production Resource Group; DR Alan M. Rowe; I.A.T.S.E. Local 728; U Larry Schoeneman; DesignLab Chicago, Inc.; DR Ecka

27、rt Steffens; Soundlight, the DMX Company; CP Steve Terry; Electronic Theatre Controls, Inc.; MP Ken Vannice; Ken Vannice LLC; G Peter Willis; Howard Eaton Lighting Ltd.; CP Observer (non-voting) members: Simon Alpert; Lighttech Event Technologies; CP Klaus Amling; Licht-Technik; MP Matthew Ardine; I

28、ATSE Local 728; U Avraham Mendall Mor “Avi“; Lightswitch; U Robert Barbagallo; Solotech Inc.; U ANSI E1.27-2 - 2009 (R2014) Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products 2017 ESTA v CP/2006-1011r5.1a Paul Beasley; Walt

29、 Disney Company; U BenDarrington; Wireless Solutions Sweden AB; MP Adam Bennette; Electronic Theatre Controls, Inc.; MP David Bertenshaw; David Bertenshaw; G Stephen Bickford; T. Kondos Associates; U Torrey Bievenour; Vision Quest Lighting; G Lee J. Bloch; Bloch Design Group, Inc.; G David A. Boller

30、; Organic Machines LLC; CP Ron Bonner; PLASA EU; G Andr Broucke; Andr Broucke; G Ken Bruns; Lumenpulse Lighting Inc.; MP John (Javid) D. Butler; Integrated Theatre, Inc.; CP Justyn Butler; JBOTS; CP Jean-Francois Canuel; A.C. Lighting Ltd.; CP Steve Carlson; High Speed Design, Inc.; MP Nyasha Chigwa

31、mba; Rhodes University; U Sang-Il Choi; Kyungpook National University; G Soo-Myong Chung; Bloch Design Group, Inc.; G Paul J. Clark; HxDx; CP Edward R. Condit; Edward R. Condit; G Fraser Connolly; Artistic Licence Holdings; DE Eric Cornwell; West Side Systems; U Stuart Cotts; Oregon Shakespeare Fest

32、ival; U Klas Dalbjorn; TC Group; MP Jeremy Day; Royal Philips; MP Gilray Densham; CAST Group Inc; MP Gary Dove; Dove Systems; MP Yongshun Duan; Macostar International Ltd.; CP Hamish Dumbreck; James Embedded Systems Engineering; MP Lauren E. Dunn; Lauren E. Dunn (Larry); DE Jerry Durand; Durand Inte

33、rstellar, Inc.; CP James Eade; PLASA EU; G Andrew Eales; Rhodes University ; U Bill Ellis; Candela Controls, Inc.; U Paul K. Ericson; Sparling DE Jon R. Farley; Sixteenth Avenue Systems; CP Martin Farnik; Robe Show Lighting s.r.o.; MP Trevor Forrest; Helvar Lighting Control; MP Steve Friedlander; Au

34、erbach Pollock Friedlander; U Jerry Gorrell; Theatre Safety Programs; G Tom Grimes; Barco; MP Josh Gubler; Josh Gubler; CP Rob Halliday; Rob Halliday; U Sean Harding; High Output, Inc.; G Douglas Heriot; Douglas Heriot; MP Bill Hewlett; Hewlett Electronics; CP Helge Hoffmann; JB Lighting; MP Jim Hol

35、laday; Luxence; G Wayne David Howell; Artistic Licence Holdings; DE Sierk Janszen; Ground Zero; U Eric Johnson; Eric Johnson; G Rob Johnston; Interactive Technologies, Inc.; MP Ed Jones; Edwin Jones Co., Inc.; CP Jussi Kallioinen; Eastway Sound U Tae Gyu Kang; Electronics and Telecommunications Rese

36、arch Institute; G ANSI E1.27-2 - 2009 (R2014) Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products 2017 ESTA vi CP/2006-1011r5.1a Reza Khanmalek; A.C. Lighting Ltd.; CP Hiroshi Kita; Marumo Electric Co., Ltd.; MP Phil Klapwyk

37、; IATSE Local 891; U Mark T. Kraft; Lehigh Electric Products Co.; MP Jason Kyle; JPK Systems Ltd.; MP Rick Leinen; Leviton Manufacturing Co., Inc.; MP Hans Leiter; Electronic Theatre Controls, Inc.; MP Jon Lenard; Applied Electronics; MP Maarten Lepelaars; eldoLED; MP Mark Manthei; Shure Inc.; G Pau

38、l F. Mardon; Pulsar Ltd.; MP Mick Martin; ShowCAD Control Systems; MP Paul Kenneth McEwan; Cooper Controls Ltd.; MP John Mehltretter; Lehigh Electric Products Co.; MP Jeff T. Miller; Walt Disney Company; U John Musarra; John Musarra; U Tobin Neis; Barbizon Companies; DR Dan T. Nguyen; LynTec; MP Lar

39、s F. Paape; Scientific Algorithms and Embedded Systems; U Ben Peoples; Pittsburgh Hoist CP Gary Pritchard; LSC Lighting Systems PTY Ltd; MP Gordan Rancic; Phoenix Service srl; MP Torben Kaas Rasmussen; Martin Professional A/S; G Charlie Richmond; Richmond Sound Design Ltd.; CP Bernardo Benito Rico;

40、Ben-Ri Electronica S.A.; MP Steve Roberts; Carr G Erwin Rol; Erwin Rol; G Dietmar Rottinghaus; Connex GmbH; MP Richard Salzedo; Avolites Ltd.; MP Yngve Sandboe; Sand Network Systems, Inc.; MP Martin Searancke; Dream Solutions Ltd.; MP Chuck Seifried; City of Phoenix; U John Sellers; AIM Northwest; G

41、 Andrew Sherar; Lightmoves PLC; MP Yehuda Shukram; Compulite Systems; MP Sean Sill; Open Lighting Project; DE Storm K. Staley; Stormwerx; U Ralph Stillinger; Royal Philips; MP Bart Swinnen; Luminex LCE; MP Arnold Tang; Arnold Tang Productions; U Geoffrey O. Thompson; IEEE 802.3/Nortel Networks; G Ch

42、ristopher Tilton; Westlake Reed Leskosky; DE Robert Timmerman; Royal Philips; MP David Timmins; Jands Electronics; MP Victoria Tisdale; Google Summer of Code 2013; G J. B. Toby; Avolites Ltd.; MP Bob Toms; Catalyst Microsystems LLC; G Robert Tooker; Robert Tooker; U Tad Trylski; Tad Trylski; U Steph

43、en J. Tyrrell; Quantum Logic; MP Tracy Underhill; 4U Consulting; G Steve Unwin; Pulsar Ltd.; MP Samuli Valo; Picturall Ltd.; MP Carlo Venturati; Clay Paky S.P.A.; MP Will Wagner; Carallon Ltd.; MP ANSI E1.27-2 - 2009 (R2014) Recommended Practice for Permanently Installed Control Cables for Use with

44、ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products 2017 ESTA vii CP/2006-1011r5.1a Oliver Waits; Avolites Ltd.; MP John Warwick; Royal Philips; MP Colin Waters; TMB; DR Ralph Weber; ENDL Texas; G Lars Wernlund; Lewlight; MP Michael (Mike) Whetstone; Integrated Theatre, Inc.; CP Loren Wilton; Showm

45、an Systems; CP Barbara Wohlsen; Barbara Wohlsen; U C. S. Wong; Macostar International Ltd.; CP Jiantong Wu; Beijing Special Engineering Design G Kehang Wu; Shure Inc.; G David Yellin; LightMinded Industries, Inc.; MP Larry Zoll; Zoll Design U Interest category codes: CP = Custom-market Producer DE =

46、 Designer DR = Dealer or Rental company G = General interest MP = Mass-market Producer U = User ANSI E1.27-2 - 2009 (R2014) Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products 2017 ESTA 1 CP/2006-1011r5.1a Table of Contents

47、NOTICE and DISCLAIMER . i Contact Information . iii Acknowledgments . iv Table of Contents 1 Foreword 2 1 General . 3 1.1 Scope . 3 1.2 Appropriate uses 3 1.3 Compliance 3 1.4 Local Requirements and Regulations 3 2 Normative references . 3 3 Definitions . 5 4 Cable types . 6 4.1 EIA-485 cable 6 4.1.

48、1 Construction 6 4.1.2 Impedance. 6 4.1.3 Capacitance 6 4.2 Category cable . 6 5 Connectors . 7 5.1 User connection points 7 5.1.1 Allowable use of RJ-45 Patch Bays 7 5.1.2 Electromagnetic Emissions from RJ-45 Patch Bays . 7 5.1.3 Alternate Connectors 7 5.2 Internal connectors 7 6 Installation 7 6.1

49、 Cable Preparation 8 6.2 Splices 8 6.3 Multiple cable types . 8 6.4 Physical Termination 8 6.5 Acceptable use of unassigned wires . 8 6.5.1 Unassigned wires unused . 9 6.5.2 Unassigned wires used for signaling 9 6.5.3 Unassigned wires used for low power transmission . 9 6.6 Isolation between data links . 9 ANSI E1.27-2 - 2009 (R2014) Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products 2017 EST