ANSI ASSE A10.33-2011 Safety and Health Program Requirements for Multi-Employer Projects《多雇主参与的工程项目安全性和卫生要求》.pdf

《ANSI ASSE A10.33-2011 Safety and Health Program Requirements for Multi-Employer Projects《多雇主参与的工程项目安全性和卫生要求》.pdf》由会员分享，可在线阅读，更多相关《ANSI ASSE A10.33-2011 Safety and Health Program Requirements for Multi-Employer Projects《多雇主参与的工程项目安全性和卫生要求》.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、Printed in U.S.A.A SS EAMERICAN SOCIETY OFSAFETY ENGINEERSAMERICAN NATIONAL STANDARDANSI/ASSE A10.33 2011Safety and Health Program Requirementsfor Multi-Employer ProjectsAmerican National Standardfor Construction and Demolition OperationsANSI/ASSE A10.33 2011Copyright American Society of Safety Engi

2、neers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:53:10 MDTNo reproduction or networking permitted without license from IHS-,-,-The information and materials contained in this publication h

3、ave been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited A10 Committee or individual committee members accept no legal responsibility for the correctness or completeness of this material or its application

4、 to specific factual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve property. Copyright American Society of Safety Engineers Provided by IHS under license wit

5、h ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:53:10 MDTNo reproduction or networking permitted without license from IHS-,-,-ANSI ANSI/ASSE A10.33 2011 American National Standard Construction and Demolition Operations Safety

6、and Health Program Requirements for Multi-Employer Projects Secretariat American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 Approved November 11, 2011 Effective May 7, 2012 American National Standards Institute, Inc. Copyright American Society of Safety Engi

7、neers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:53:10 MDTNo reproduction or networking permitted without license from IHS-,-,-Approval of an American National Standard requires verificati

8、on by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected inte

9、rests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their exist

10、ence does not in any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no

11、circumstance give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretation should be addressed to the se

12、cretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw

13、this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published January, 2012 by American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 (847) 69

14、9-2929 www.asse.org Copyright 2012 by American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America Am

15、erican National Standard Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:53:10 MDTNo reproduction or networking permitted without license from IHS

16、-,-,-Foreword (This Foreword is not a part of American National Standard A10.33-2011.) This standard is one of a series of safety standards that have been formulated by the Accredited Standards Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in t

17、he A10 series will find a major application in industry, serving as a guide to contractors, labor, and equipment manufacturers. For the convenience of users, a list of existing and proposed standards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 P

18、re-Planning for Construction Safety and Health (under development) A10.2 Safety, Health, and Environmental Training (under development) A10.3 Powder-Actuated Fastening Systems A10.4 Personnel Hoists and Employee Elevators A10.5 Material Hoists A10.6 Demolition Operations A10.7 Transportation, Storag

19、e, Handling, and Use of Commercial Explosives and Blasting Agents A10.8 Scaffolding A10.9 Concrete and Masonry Construction A10.10 Temporary and Portable Space Heating Devices A10.11 Personnel and Debris Nets A10.12 Excavation A10.13 Steel Erection A10.15 Dredging A10.16 Tunnels, Shafts, and Caisson

20、s A10.17 Safe Operating Practices for Hot Mix Asphalt (HMA) Construction A10.18 Temporary Roof and Floor Holes, Wall Openings, Stairways, and Other Unprotected Edges A10.19 Pile Installation and Extraction Operations A10.20 Ceramic Tile, Terrazzo, and Marble Work A10.21 Safe Construction and Demolit

21、ion of Wind Generation/Turbine Facilities (under development) A10.22 Rope-Guided and Non-Guided Workers Hoists A10.23 Safety Requirements for the Installation of Drilled Shafts (under development) A10.24 Roofing Safety Requirements for Low-Sloped Roofs A10.25 Sanitation in Construction A10.26 Emerge

22、ncy Procedures for Construction Sites (under development) A10.27 Hot Mix Asphalt Facilities A10.28 Work Platforms Suspended from Cranes or Derricks A10.29 Aerial Platforms in Construction (under development) A10.31 Digger-Derricks A10.32 Personal Fall Protection Used in Construction and Demolition O

23、perations A10.33 Safety and Health Program Requirements for Multi-Employer Projects A10.34 Public Protection A10.37 Debris Nets A10.38 Basic Elements of a Program to Provide a Safe and Healthful Work Environment A10.39 Construction Safety and Health Audit Program A10.40 Reduction of Musculoskeletal

24、Problems in Construction A10.41 Equipment Operator and Supervisor Qualifications and Responsibilities (under development) A10.42 Rigging Qualifications and Responsibilities in the Construction Industry A10.43 Confined Spaces in Construction (under development) Copyright American Society of Safety En

25、gineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:53:10 MDTNo reproduction or networking permitted without license from IHS-,-,-A10.44 Lockout/Tagout in Construction A10.46 Hearing Loss P

26、revention A10.47 Highway Construction Safety A10.48 Communication Tower Erection (under development) A10.49 Control of Health Hazards (under development) One purpose of these standards is to serve as guides to governmental authorities having jurisdiction over subjects within the scope of the A10 Com

27、mittee standards. If these standards are adopted for governmental use, the reference of other national codes or standards in individual volumes may be changed to refer to the corresponding regulations. Revisions: The A10 Committee welcomes proposals for revisions to this standard. Revisions are made

28、 to the standard periodically (usually five years from the date of the standard) to incorporate changes that appear necessary or desirable, as demonstrated by experience gained from the application of the standard. Proposals should be as specific as possible, citing the relevant paragraph number(s),

29、 the proposed wording, and the reason for the proposal. Pertinent documentation would enable the A10 Committee to process the changes in a more timely manner. Interpretations: Upon a request in writing to the Secretariat, the A10 Committee will render an interpretation of any requirement of the stan

30、dard. The request for interpretation should be clear, citing the relevant paragraph number(s) and phrased as a request for a clarification of a specific requirement. Oral interpretations are not provided. No one but the A10 Committee (through the A10 Secretariat) is authorized to provide any interpr

31、etation of this standard. Approval: Neither the A10 Committee nor American National Standards Institute (ANSI) “approves,“ “certifies,“ “rates,“ or “endorses“ any item, construction, proprietary device, or activity. Appendixes: Appendixes are included in most standards to provide the user with addit

32、ional information related to the subject of the standard. Appendices are not part of the approved standard. Committee Meetings: The A10 Committee meets twice a year. Persons wishing to attend a meeting should contact the Secretariat for information. Standard Approval: This standard was processed and

33、 approved for submittal to ANSI by the American National Standards Committee on Safety in Construction and Demolition Operations, A10. Approval of the standard does not necessarily imply (nor is it required) that all Committee members voted for its approval. At the time this standard was published,

34、the A10 Committee had the following members: Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=ZhaoNot for Resale, 05/02/2012 00:53:10 MDTNo reproduction or networking permitted with

35、out license from IHS-,-,-Richard King, CSP, Chairman James Tomaseski, Vice Chairman Timothy R. Fisher, CSP, CHMM, ARM, CPEA, Secretary Jennie Dalesandro, Administrative Technical Support Organization Represented Name of Representative Accident Prevention Corporation Frank Burg, CSP, P.E. Michael Ser

36、pe, CSP Aegis Corporation Matthew J. Burkart, P.E. Judith Burkart Alstom Power Robert Renney Ted P. Sharp American Insurance Services Group Thad Nosal James G. Borchardt, CSP, CPE ASCE - Construction Institute Committee William R. Nash, P.E. American Society of Safety Engineers Ken Shorter, CSP, ARM

37、 A. David Brayton, CSP, CPC American Wind Energy Association Michele Myers Mihelic American Work Platform Training, Inc. Dennis W. Eckstine Asbestos Workers International Union Terry Lynch Jim E. Lapping, MS, P.E., CSP Associated Builders and Contractors, Inc. Chris Williams Associated General Contr

38、actors of America, The Charlie Bird Kevin CannonAssociation of Union Constructors, The Wayne Creasap, II A-Z Safety Resources, Inc. Jane F. Williams, CPEA, CCA Barton-Malow Company Mark Klimbal, CSP, ARM Clayton Shafer Black & Veatch Richard F. King, CSP John H. Johnson Building & Construction Trade

39、s Department Pete Stafford Jim Platner, Ph.D., CIH CPWR - Center for Construction Research & Training Mike McCann, Ph.D., CIH Pete Stafford Capital Safety Group Scott C. Casebolt J. Thomas Wolner, P.E. Clark Construction Group Tim Sirofchuck, CSP Kurt DunmireCole-Preferred Safety Consulting, Inc. Ba

40、rry Cole Philip L. Colleran Philip L. Colleran, CSP Construction & Realty Safety Group, Inc. Ron Lattanzio Frank MarinoECI Safety Services Co. Anthony Merisola Patrick Brennan, CSHM, CSSM Edison Electric Institute R. Lee Reed, Jr. Charles Kelly E. I. Dupont de Nemours & Company Gary Birchall Ronald

41、Probasco, CSP Elevator Industry Preservation Fund Garry Kosinski Rod Gilles Ellis Fall Safety Solutions J. Nigel Ellis, Ph.D., P.E., CSP, CPE Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931

42、001, User=ZhaoNot for Resale, 05/02/2012 00:53:10 MDTNo reproduction or networking permitted without license from IHS-,-,-John Whitty, P.E. Gilbane Building Co. Anthony ODea, CSP, CHST Charles Praul, Jr., ASP Richard D. Hislop Richard HislopIndependent Electrical Contractors, Inc. John P. Masarick B

43、ob BairdInstitute of Makers of Explosives Lon D. Santis Susan JP FlanaganInternational Association of Bridge, Structural, Ornamental and Reinforcing Iron Workers Steve Rank Robert Migliaccio, Sr. International Brotherhood of Boilermakers Roger Erickson Bridget Connors International Brotherhood of El

44、ectrical Workers James Tomaseski International Brotherhood of Teamsters LaMont Byrd, CIH Julie Plavka International Safety Equipment Association Cristine Fargo International Union of Bricklayers & Allied Craftworkers Michael Kassman, CHST Eileen Betit International Union of Operating Engineers Emmet

45、t Russell Steve BrownJack L. Mickle & Associates Jack Mickle, Ph.D., P.E. Steve Stock, P.E., PLS Laborers International Union of North America Scott Schneider, MS, CIH Walter A. Jones, MS Marsh USA, Inc. Timothy Bergeron, CSP Maryland Occupational Safety & Health Mischelle Vanreusel Eric Uttenreithe

46、r Mechanical Contractors Association of America Peter Chaney, MS, CSP Dennis Langley MYR Group, Inc. National Association of Home Builders Robert Matuga Marcus OdorizziNational Association of Railroad Safety Consultants & Investigators Lewis Barbe, P.E., CSP, CRSP National Electrical Contractors Ass

47、ociation Michael J. Johnston Jerry Rivera National Institute for Occupational Safety & Health Thomas G. Bobick, Ph.D., P.E., CSP, CPE Matt Gillen, CIH National Railroad Contractors & Maintenance Association Jeffrey D. Meddin, CSP, CHCM, CHEP National Roofing Contractors Association Harry Dietz Tom S

48、hanahan National Society of Professional Engineers E. Ross Curtis, P.E., DFE Paul Swanson, P.E. Operative Plasterers and Cement Masons International Association Gerald Ryan Daniel M. Paine Daniel M. Paine Barbara Paine Phoenix Fabricators and Erectors, Inc. Robert E. Clouse, CSP, CHST Frank MasseyPowder Actuated Tool Manufacturers Institute James A. Borchers David JablonskiPower Consultants, Incorporated David Goldsmith Camille Villanova Professional Safety Consultants, Inc. Jim E. Lapping, MS, P.E., CSP Copyright American Society of Safety Engineers Provided by IHS unde