BS ISO 702-1-2009 en_2586 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Conical connection《机床.主轴端头与工作夹持头的连接尺寸规格.锥形连接》.pdf

《BS ISO 702-1-2009 en_2586 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Conical connection《机床.主轴端头与工作夹持头的连接尺寸规格.锥形连接》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 702-1-2009 en_2586 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Conical connection《机床.主轴端头与工作夹持头的连接尺寸规格.锥形连接》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO 70 2- 1:2 009 ICS 25.060.20 NO COP YING WIT HOUT BSI PERM ISS ION EXCEPT AS PERM ITT ED BY COP YRIGHT LAW BRITISH STAN DARD Mac hine tools Con nect ing di me nsio ns of spind le noses and wo rk ho ld ing chucks Part1 :C on icalc on nect ion Incorporating corrigendum August 2015This Brit ish S

2、ta nda rd was pub lishedu ndert he aut horityo ft he Sta nda rds Policy and Stra te gy Co mm itt ee on 31 Aug ust 20 09 ISBN978058091434 8 Amen dment s/c orr ige nda is su ed si ncep ublic at ion Date Comments BS ISO 70 2- 1:2 009 Nati on al for ew ord This Bri tish Sta nda rd is the UK imp le me nt

3、a tiono fI SO 70 2- 1:2 00 9. The UK pa rticip at ion in its pre pa rat ion was ent ruste d by Tech ni ca l Committee MTE/1, Machine tools, to MTE/1/2, Machine tools Accuracy. A l i s t o f o rg a n i z a t i o ns r epr esen ted on thi s subc ommi ttee ca n be o btain ed Th is publ ic ation does not

4、 pur port to in cl ude all the nec ess ary provi si ons of ac ontr ac t. Us ers arer esp ons ib le for itsc orr ect appl ic ati on. Co mp lia nce withaB ritish St and ard cannotc onf er immu ni ty fr om le gal obli gation s. on request to its secretary. The British Standards Institution 2015. Publis

5、hed by BSI Standards Limited 2015 31 August 2015 Implementation of ISO corrected text 1 October 2009. Tables 1 and 2 updated Reference number ISO 702-1:2009(E) ISO 2009INTERNATIONAL STANDARD ISO 702-1 Third edition 2009-07-15 Corrected version 2009-10-01Machine tools Connecting dimensions of spindle

6、 noses and work holding chucks Part 1: Conical connection Machines-outils Dimensions dassemblage des nez de broche et des mandrins porte-pices Partie 1: Assemblage conique ISO 702-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this

7、file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretari

8、at accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure

9、that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication m

10、ay be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel

11、. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2009 All rights reservedBS ISO 702-1:2009ISO 702-1:2009(E) ISO 2009 All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of

12、 national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Int

13、ernational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with t

14、he rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval

15、by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 702-1 was prepared by Technical Committee I

16、SO/TC 39, Machine tools, Subcommittee SC 8, Work holding spindles and chucks. This third edition cancels and replaces the second edition (ISO 702-1:2001), Tables 1 and 2 and Figures 1 and 2 of which have been technically revised. ISO 702 consists of the following parts, under the general title Machi

17、ne tools Connecting dimensions of spindle noses and work holding chucks: Part 1: Conical connection Part 2: Camlock type Part 3: Bayonet type Part 4: Cylindrical connection In this corrected version of ISO 702-1:2009, the “ ” (minus) sign has been deleted from the zero values of tolerance of d 1in T

18、able 1 and footnote “c” of Table 2 has been corrected to read “Type A1” and “Type A2”. BS ISO 702-1:2009BS ISO 702-1:2009INTERNATIONAL STANDARD ISO 702-1:2009(E) ISO 2009 All rights reserved 1 Machine tools Connecting dimensions of spindle noses and work holding chucks Part 1: Conical connection 1 S

19、cope This part of ISO 702 specifies the sizes for interchangeability of conical spindle noses and corresponding connecting faces of face plates or work holding chucks. NOTE The “camlock type”, “bayonet type” and “cylindrical connection” are specified in ISO 702-2, ISO 702-3 and ISO 702-4, respective

20、ly. 2 Interchangeability In this part of ISO 702, all dimensions and tolerances are expressed in millimetres. Although there are differences in the values of dimensions and assembly screws in metric and inch series, the connecting dimensions in Tables 1 and 2 allow for interchangeability between met

21、ric- and inch-based chucks (see also footnote “a” in Table 2). 3 Sizes for interchangeability 3.1 Spindle noses See Figure 1 and Table 1. Type A1: Two bolt circles of diameter d 2and d 3 ; Type A2: One outer bolt circle of diameter d 3(Type A2 for Nos. 3 and 4; types A1 and A2 for Nos. 5 to 28). BS

22、ISO 702-1:2009ISO 702-1:2009(E) 2 ISO 2009 All rights reservedFigure 1 (continued) BS ISO 702-1:2009ISO 702-1:2009(E) ISO 2009 All rights reserved 3Key 1 size No. 3 2 size No. 4 3 size Nos. 5 to 11 4 size Nos. 15 to 28 aAll fixing holes. Figure 1 Spindle noses BS ISO 702-1:2009ISO 702-1:2009(E) 4 IS

23、O 2009 All rights reservedTable 1 Dimensions of spindle noses No. Dimension 3 4 5 6 8 11 15 20 28 nom. 53,975 63,513 82,563 106,375 139,719 196,869 285,775 412,775 584,225 d 1tol.0,008 0 +0,008 0 +0,010 0 +0,010 0 +0,012 0 +0,014 0 +0,016 0 +0,020 0 +0,023 0 +d 2 61,9 82,6 111,1 165,1 247,6 368,3 53

24、0,2 d 370,6 82,6 104,8 133,4 171,4 235 330,2 463,6 647,6 d 492 108 133 165 210 280 380 520 725 d 5M10 M10 M10 M12 M16 M20 M24 M24 M30 d 6H8/h8 14,25 15,9 19,05 23,8 28,6 34,9 41,3 50,8 l 1(Type A1) 0 0,025 14,288 15,875 17,462 19,050 20,638 22,225 25,400 l 1(Type A2) 11 11 13 14 16 18 19 21 24 l 216

25、 20 22 25 28 35 42 48 56 l 3 5 5 5 6 8 8 8 8 l 414 17 19 22 25 32 37 42 50 w and x 0,2 0,2 0,2 0,2 0,2 0,2 0,3 0,3 0,3 NOTE The general tolerance for untoleranced dimensions is 0,4 mm. BS ISO 702-1:2009ISO 702-1:2009(E) ISO 2009 All rights reserved 5 3.2 Connecting face dimensions See Figure 2 and T

26、able 2. a) With inner bolt circle (for mounting on spindle nose A1 by means of its inner bolt circle) b) With outer bolt circle (for mounting on spindle nose A1, or spindle nose A2 by means of its outer bolt circle) Figure 2 Connecting face dimensions BS ISO 702-1:2009ISO 702-1:2009(E) 6 ISO 2009 Al

27、l rights reservedTable 2 Connecting face dimensions No. Dimension 3 4 5 6 8 11 15 20 28 d 153,975 63,513 82,563 106,375 139,719 196,869 285,775 412,775 584,225 tol. Type 1 a0,003 0,005 + 0,003 0,005 + 0,004 0,006 + 0,004 0,006 + 0,004 0,008 + 0,004 0,010 + 0,004 0,012 + 0,005 0,015 + 0,006 0,017 + t

28、ol. Type 2 a0,008 0 +0,008 0 +0,010 0 +0,010 0 +0,012 0 +0,014 0 +0,016 0 +0,020 0 +0,030 0 +d 2 61,9 82,6 111,1 165,1 247,6 368,3 530,2 d 370,6 82,6 104,8 133,4 171,4 235 330,2 463,6 647,6 d 492 108 133 165 210 280 380 520 725 d 512 12 12 14 18 22 25,5 b27 b33 d 60,1 0 + 14,7 16,3 19,45 24,2 29,4 3

29、5,7 42,1 51,6 l 1(Type A1) 0,025 0 + 14,288 15,875 17,462 19,050 20,638 22,225 25,400 l 1min. (Type A2) c 15 16 18 20 21 23 26 l 210 10 12 13 14 16 17 19 22 l 3 6,5 6,5 6,5 8 10 10 10 10 w and x 0,2 0,2 0,2 0,2 0,2 0,2 0,3 0,3 0,3 NOTE The general tolerance for untoleranced dimensions is 0,4 mm. aTy

30、pe identification shall be marked. bThese are compromise dimensions to allow for interchangeability between inch and metric chucks. cl 1of Type A1 may be used in place of l 1of Type A2 only if the face plate is rigid enough not to cause bending when the screws are tightened on the inner bolt circle.

31、 BS ISO 702-1:2009BS ISO 702-1:2009ISO 702-1:2009(E) ICS 25.060.20 Price based on 6 pages ISO 2009 All rights reserved BS ISO 702-1:2009BS ISO 702-1:2009 This page has been intentionally left blankBSI is the national body responsible for preparing British Standards and other standards-related public

32、ations, information and services. BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited. British Standards Institution (BSI) BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK About us We bring together business,

33、 industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions. The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of al

34、l sizes and across all sectors choose standards to help them achieve their goals. Information on standards We can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Know

35、ledge Centre. Buying standards You can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Developm

36、ent Organizations, hard copies can be ordered from our Customer Services team. Subscriptions Our range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to With British Standards Online (BSOL) youll have instant acc

37、ess to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in sing

38、le copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and

39、 the benefits of membership, please visit With a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current.

40、For further information, email . Revisions Our British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI public

41、ation please inform the Knowledge Centre. Copyright All the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standar

42、dization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying,

43、 recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department. Useful Contacts: Customer Services Tel: +44 845 086 9001 Email (orders): Email (enquiries): Subscriptions Tel: +44 845 086 9001 Email: Knowledge Centre Tel: +44 20 8996 7004 Email: Copyright & Licensing Tel: +44 20 8996 7070 Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW