IEEE C37 20 10-2016 en Standard Definitions for AC (52 kV and below) and DC (3 2 kV and below) Switchgear Assemblies.pdf

《IEEE C37 20 10-2016 en Standard Definitions for AC (52 kV and below) and DC (3 2 kV and below) Switchgear Assemblies.pdf》由会员分享，可在线阅读，更多相关《IEEE C37 20 10-2016 en Standard Definitions for AC (52 kV and below) and DC (3 2 kV and below) Switchgear Assemblies.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、IEEE Standard Definitions for AC (52 kV and below) and DC (3.2 kV and below) Switchgear AssembliesIEEE Std C37.20.10-2016IEEE Power and Energy SocietySponsored by the Switchgear CommitteeIEEE3 Park AvenueNew York, NY 10016-5997USAIEEE Std C37.20.10-2016IEEE Standard Definitions for AC (52 kV and bel

2、ow) and DC (3.2 kV and below) Switchgear AssembliesSponsor Switchgear Committee of the IEEE Power and Energy SocietyApproved 22 September 2016IEEE-SA Standards BoardAbstract: Terms and definitions encompassing the products within the scope of ac (38 kV and be-low for air insulated equipment, 52 kV a

3、nd below for gas insulated equipment) and dc (3.2 kV and below) power switchgear assemblies, including components for switching, interrupting, metering, protection, and regulating purposes as used primarily in connection with generation, transmission, distribution, and conversion of electric power a

4、re included in this standard.Keywords: definitions, IEEE C37.20.10, metal-enclosed bus, power circuit breakers, switchgear, termsThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2016 by The Institute of Electrical and Electronics Enginee

5、rs, Inc. All rights reserved. Published 11 November 2016. Printed in the United States of America.IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE discl

6、aims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase

7、, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard

8、.In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document

9、, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri-ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT,

10、 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE-MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON-TRACT, STRICT LIABILITY, OR TORT (INCLUDING N

11、EGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.TranslationsThe IEEE consensus development process involves the review of documents in Eng

12、lish only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.4Copyright 2016 IEEE. All rights reserved.Official statementsA statement, written or oral, that is not processed in accordance with the IEEE-SA Stan

13、dards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting informa

14、tion on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE.Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership a

15、ffiliation with IEEE. However, IEEE does not provide consulting information or advice pertain-ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a cons

16、ensus of concerned interests, it is important that any responses to comments and questions also receive the concur-rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi-nating Committees are not able to provide an instant response to comments or

17、 questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group.Comments on standards s

18、hould be submitted to the following address:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854 USALaws and regulationsUsers of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply co

19、mpliance to any applicable regulatory require-ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these

20、documents may not be construed as doing so.CopyrightsIEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws

21、and regulations, and use in private self-regulation, standardization, and the pro-motion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.PhotocopiesSub

22、ject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Cleara

23、nce Center, Customer Ser-vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.5Copyright 2016 IEEE. All rights reserved.Updating of IEEE

24、Standards documentsUsers of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri-genda, or errata. An official IEEE document at any point in time consi

25、sts of the current edition of the document together with any amendments, corrigenda, or errata then in effect.Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its

26、contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amended through t

27、he issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at https:/ieeexplore.ieee.org/ or con-tact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards devel-opment process, visit the IEEE-SA Website at http:/standards.ieee.org.ErrataErrata

28、, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.PatentsAttention is called to the possibility that implementation of this standard may req

29、uire use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Let

30、ter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with

31、 reasonable terms and conditions that are demonstrably free of any unfair discrim-ination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re-sponsible for identifying Essential Patent Claims for w

32、hich a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discrimi

33、natory. Users of this standard are expressly advised that determination of the valid-ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6Copyright 2016 IEEE. All rights r

34、eserved.ParticipantsAt the time this IEEE standard was completed, the Switchgear Assemblies Defi nitions Working Group had the following membership:Keith Flowers, ChairDarryl Moser, Vice ChairPaul BarnhartClint CarneDaniel Delfi noDavid DunneDouglas J. EdwardsMichael FlackPaul GingrichRonald Hartzel

35、Thomas HawkinsJeffery HidakaDan HrncirDavid JacksonHarry JostenArthur JurJohn KaminskiMichael LafondJeffrey MizenerCharles A. MorseT. W. OlsenRichard RohrAmy RowellM. Dean SigmonPaul SullivanRichard TannerMarcelo ValdesTerry A. WoodyardThe following members of the individual balloting committee vote

36、d on this standard. Balloters may have voted for approval, disapproval, or abstention.Thomas BarnesGeorge BeckerWallace BinderWilliam BloetheChris BrooksEldridge ByronThomas CallsenPaul CardinalChih ChowRobert CohnGlenn DavisGary DonnerRandall DotsonLouis DoucetEdgar DullniDouglas J. EdwardsRonald E

37、scoMichael FlackKeith FlowersFredric FriendDavid GilmerPaul GingrichMietek GlinkowskiJames GrahamLou GrahorRandall GrovesPaul HamerThomas HawkinsJeffrey HelzerDan HrncirRichard JacksonAlan JensenAndrew JonesHarry JostenArthur JurLaszlo KadarJohn KayChad KennedyYuri KhersonskyBoris KoganJim Kulchisky

38、Chung-Yiu LamJohn LeachAlbert LivshitzR LongFrank MayleJeffery MizenerCharles A. MorseDarryl MoserDaniel MulkeyJerry MurphyMichael NewmanJoe NimsT. W. OlsenShawn PattersonIulian Profi rCarl ReigartJohn RoachTimothy RobirdsTim RohrerThomas RozekBartien SayogoNikunj ShahSushil ShindeM. Dean SigmonJere

39、my SmithJerry SmithDonald SwingC. TailorDavid TepenWayne TimmMarcelo ValdesRoger VerdolinJohn VergisMark WaldronKenneth WhiteTerry A. WoodyardDean YagerLarry YonceMatthew Zeedyk7Copyright 2016 IEEE. All rights reserved.When the IEEE-SA Standards Board approved this standard on 22 September 2016, it

40、had the following membership:Jean-Philippe Faure, ChairTed Burse, Vice ChairJohn D. Kulick, Past ChairKonstantinos Karachalios, SecretaryChuck AdamsMasayuki AriyoshiStephen DukesJianbin FanJ. Travis Griffi thGary HoffmanRonald W. HotchkissMichael JanezicJoseph L. Koepfi nger*Hung LingKevin LuAnnette

41、 D. ReillyGary RobinsonMehmet UlemaYingli WenHoward WolfmanDon WrightYu YuanDaidi Zhong*Member Emeritus8Copyright 2016 IEEE. All rights reserved.IntroductionThis introduction is not part of IEEE Std C37.20.10-2016, IEEE Standard Definitions for AC (52 kV and below) and DC (3.2 kV and below) Switchge

42、ar Assemblies.This standard constitutes a compilation of terms and definitions relating to power switchgear assemblies and should be considered to reflect common and current usage of that industry.The size of this standard has been kept to a minimum by omitting all terms satisfactorily covered in re

43、adily available dictionaries. In many instances, terms and definitions of related products exhibiting minor variations have been combined for greater clarity.Specifications and ratings have been excluded from definitions. This information is included in standards cov-ering the specific products.This

44、 standard contains, in addition to many additions and modifications, the relevant terms from IEEE Std C37.100, which is scheduled to be withdrawn when its validity expires in 2018. IEEE Std C37.100-1992 covered the term “electric eels.” After much consideration, the working group felt this term shou

45、ld be at least mentioned (for historical purposes) within the Introduction of this standard.9Copyright 2016 IEEE. All rights reserved.Contents1. Overview . 101.1 Scope 101.2 Purpose . 102. Definitions . 11Annex A (informative) Bibliography 2710Copyright 2016 IEEE. All rights reserved.IMPORTANT NOTIC

46、E: IEEE Standards documents are not intended to ensure safety, security, health, or environmental protection, or ensure against interference with or from other devices or networks. Imple-menters of IEEE Standards documents are responsible for determining and complying with all appropriate safety, se

47、curity, environmental, health, and interference protection practices and all applicable laws and regulations.This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be f

48、ound under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html.1. Overview1.1 ScopeThe terms and definitions in this standard are intended to encompa

49、ss the products within the scope of ac (38 kV and below for air-insulated equipment, 52V kV and below for gas-insulated equipment) and dc (3.2 kV and be-low) power switchgear assemblies for switching, interrupting, metering, protection, and regulating purposes as used primarily in connection with generation, transmission, distribution, and conversion of electric power.1.2 PurposeThe definitions of terms and explanatory notes relating thereto contained in this standard are not intended to encompass all possible meanings of the terms. They are intended for the sole pur