IEC TR 62653-2012 Guideline for safe operation of medical equipment used for haemodialysis treatments《血液透析治疗用医疗设备安全操作导则》.pdf

《IEC TR 62653-2012 Guideline for safe operation of medical equipment used for haemodialysis treatments《血液透析治疗用医疗设备安全操作导则》.pdf》由会员分享，可在线阅读，更多相关《IEC TR 62653-2012 Guideline for safe operation of medical equipment used for haemodialysis treatments《血液透析治疗用医疗设备安全操作导则》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC/TR 62653 Edition 1.0 2012-06 TECHNICAL REPORT Guideline for safe operation of medical equipment used for haemodialysis treatments IEC/TR 62653:2012(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this

2、 publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or ha

3、ve an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec

4、.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constan

5、t review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, tech

6、nical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Elect

7、ropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Cu

8、stomer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC/TR 62653 Edition 1.0 2012-06 TECHNICAL REPORT Guideline for safe operation of medical equipment used for haemodi

9、alysis treatments INTERNATIONAL ELECTROTECHNICAL COMMISSION U ICS 11.040.20; 11.040.25 PRICE CODE ISBN 978-2-83220-133-6 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 TR 62653 IEC:2012(E)

10、CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Requirements . 12 4.1 Personnel, qualification . 12 4.2 Training . 12 4.3 Infrastructure . 12 4.3.1 General . 12 4.3.2 Infrastructure requirements 13 5 Treatment . 15 5.1 General . 15 5.2 Prep

11、aration . 15 5.2.1 DIALYSIS MACHINE . 15 5.2.2 * DIALYSIS FLUID PREPARATION . 15 5.2.3 * EXTRACORPOREAL CIRCUIT 16 5.2.4 DIALYSIS FLUID compartment 16 5.2.5 PATIENT . 16 5.3 Treatment 17 5.3.1 Preparing the vascular access . 17 5.3.2 * Connection to the EXTRACORPOREAL CIRCUIT 17 5.3.3 Initiation of

12、treatment . 17 5.3.4 Checks to be repeated during the treatment 18 5.3.5 * HAZARDS during the treatment . 19 5.3.6 Deviations from the treatment parameters prescribed or treatment interruption 19 5.3.7 Terminating the DIALYSIS treatment 20 5.3.8 * After completion of the dialysis treatment 20 6 Noti

13、fication of INCIDENTS . 20 7 Handling medical devices . 20 7.1 Technical service, SERVICING and checks of equipment and plants 20 7.2 * Equipment safety and device combinations . 21 7.3 Non-INTENDED USE . 21 Annex A (informative) Explanatory technical remarks . 22 Bibliography 28 Index of defined te

14、rms used in this guideline. 30 Figure 1 Example PATIENT ENVIRONMENT . 10 Figure A.1 Typical central DIALYSIS FLUID delivery system, CDDS . 26 TR 62653 IEC:2012(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ GUIDELINE FOR SAFE OPERATION OF MEDICAL EQUIPMENT USED FOR HAEMODIALYSIS TREATMENTS FOREWOR

15、D 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electr

16、ical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to techn

17、ical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organ

18、ization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical

19、 committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publicati

20、ons is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national

21、 and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment service

22、s and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servant

23、s or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication,

24、 use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility th

25、at some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the public

26、ation of a technical report when it has collected data of a different kind from that which is normally published as an International Standard, for example “state of the art“. IEC 62653, which is a technical report, has been prepared by subcommittee 62D: Electromedical equipment, of IEC technical com

27、mittee 62: Electrical equipment in medical practice. The text of this technical report is based on the following documents: Enquiry draft Report on voting 62D/976/DTR 62D/1006/RVC Full information on the voting for the approval of this technical report can be found in the report on voting indicated

28、in the above table. 4 TR 62653 IEC:2012(E) This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The verbal forms used in this guideline are conform to usage described in Annex H of the ISO/IEC Directives, Part 2, 2011. For the purpose of this informative guideline the

29、 auxiliary verb ”should“ means that this statement of the guideline is recommended for safe operation. This term is not to be interpreted as indicating requirements. In this guideline the following print types are used: Requirements and definitions: roman type; Informative material, such as notes, e

30、xamples and references: smaller type; TERMS DEFINED IN THIS GUIDELINE OR AS NOTED: SMALL CAPITALS. An asterisk (*) as the first character of a title or at the beginning of a paragraph indicates that there is guidance or rationale related to that item in Annex A. The committee has decided that the co

31、ntents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual

32、version of this publication may be issued at a later date. TR 62653 IEC:2012(E) 5 INTRODUCTION HAEMODIALYSIS is a therapeutic method for treating terminal renal insufficiency, in addition to peritoneal dialysis and renal transplantation. HAEMODIALYSIS is often used as a general term for related extr

33、acorporeal methods of renal replacement therapy. At present, HAEMODIALYSIS is a standard procedure in renal replacement therapy, which, when applied properly, yields high- quality results. The treatment is a complex procedure which is under the influence of medical- biological, physical-chemical and

34、 technical processes. Numerous guidelines, agreements, codes, decrees and laws have been established with regard to HAEMODIALYSIS. They contain detailed regulations about the quality of structures, processes and results, laid down by the legislative body, executive bodies of self-government, and fun

35、ding agencies. Since the safety of PATIENT treatment and the legal provisions are highly important, it is reasonable to introduce a quality management system. This technical report may be an integral part of a quality management system of the ORGANIZATION. The ORGANIZATION should identify the residu

36、al risks, for example based on these guidelines. The ORGANIZATION should minimise such risks by the use of appropriate standard operating procedures. This document is intended to support the clinical management responsible for the quality management of HAEMODIALYSIS therapies. 6 TR 62653 IEC:2012(E)

37、 GUIDELINE FOR SAFE OPERATION OF MEDICAL EQUIPMENT USED FOR HAEMODIALYSIS TREATMENTS 1 Scope This technical report describes the technical requirements for use of equipment in HAEMODIALYSIS, HAEMOFILTRATION and HAEMODIAFILTRATION. These principles should be complied with to ensure safe, permissible

38、and proper application. The physician is responsible for the HAEMODIALYSIS treatment prescription. However, the ORGANIZATION administering the treatment is responsible for all resources, structures and processes used in connection with the treatment. These responsibilities will not be described here

39、. If applicable, the scope may be applicable to the use of the equipment in paediatrics, home HAEMODIALYSIS, acute and SORBENT DIALYSIS SYSTEMS. The requirements of IEC 60601-2-16 ensure that equipment used for extracorporeal renal replacement therapy operates with a high level of safety. Despite th

40、at high level of safety, however, some residual risk remains, related to medical-biological, physical-chemical and technical HAZARDS. The ORGANIZATION administering the treatment is responsible for managing the residual risk. This technical report is not intended to be used as the basis of regulator

41、y inspection or certification assessment activities. 2 Normative references None. NOTE Informative references including IEC and ISO standards are listed in the Bibliography on page 28. 3 Terms and definitions For the purpose of this document, the following terms and definitions apply. NOTE An index

42、of defined terms is found on page 30. 3.1 ACCESSORY additional part for use with equipment in order to: achieve the INTENDED USE, adapt it to some special use, facilitate its use, enhance its performance, or enable its functions to be integrated with those of other equipment Note 1 to entry: Accesso

43、ries can be objects, substances, preparations of substances and software which do not constitute any medical devices themselves. SOURCE: IEC 60601-1:2005, 3.3, modified a note to entry has been added. TR 62653 IEC:2012(E) 7 3.2 ARTERIAL PRESSURE pressure measured in the blood withdrawal line of the

44、EXTRACORPOREAL CIRCUIT Note 1 to entry: A difference can be made between the pre-pump pressure, which is upstream of the blood pump, and post-pump pressure, which is downstream of the blood pump. SOURCE: IEC 60601-2-16:2012, 201.3.201 3.3 BLOOD LEAK leakage of blood from the blood compartment to the

45、 DIALYSIS FLUID compartment of the DIALYSER Note 1 to entry: Not to be mistaken for blood loss to the environment. SOURCE: IEC 60601-2-16:2012, 201.3.202, modified the original note to entry has been replaced. 3.4 DIALYSER a device containing a semi-permeable membrane that is used to perform HAEMODI

46、ALYSIS, HAEMODIAFILTRATION or HAEMOFILTRATION SOURCE: IEC 60601-2-16:2012, 201.3.204 * 3.5 DIALYSIS FLUID aqueous fluid containing electrolytes and usually buffer and glucose, which is intended to exchange solutes with blood during HAEMODIALYSIS Note 1 to entry: The term “DIALYSIS FLUID” is used thr

47、oughout this document to mean the fluid made from DIALYSIS WATER and concentrates which is delivered to the DIALYSER by the DIALYSIS FLUID delivery system. Such phrases as “dialysate”, “dialysis solution” or “dialysing fluid” may be used in place of DIALYSIS FLUID. Note 2 to entry: The DIALYSIS FLUI

48、D entering the DIALYSER is referred to as “fresh DIALYSIS FLUID”, while the fluid leaving the DIALYSER is referred to as “spent DIALYSIS FLUID”. Note 3 to entry: DIALYSIS FLUID does not include prepackaged parenteral fluids used in some renal replacement therapies, such as HAEMODIAFILTRATION and HAE

49、MOFILTRATION. SOURCE: ISO 11663:2009, 3.7 * 3.6 DIALYSIS MACHINE HAEMODIALYSIS MACHINE HAEMODIAFILTRATION MACHINE HAEMOFILTRATION MACHINE system or combination of units used to perform HAEMODIALYSIS, HAEMODIAFILTRATION and/or HAEMOFILTRATION Note 1 to entry: The DIALYSIS MACHINE can be a batch DIALYSIS MACHINE filled with the entire DIALYSIS FLUID prior to treatment (see Clause A.6). Note 2 to entry: The DIALYSIS MACHINE can be supplied with DIALYSIS FLUID from a central DIALYSIS FLUID deliv