TIA-707 07-B-2009 Data Service Option For Spread Spectrum Systems - Section 07《扩频系统数据服务选项 第07节》.pdf

《TIA-707 07-B-2009 Data Service Option For Spread Spectrum Systems - Section 07《扩频系统数据服务选项 第07节》.pdf》由会员分享，可在线阅读，更多相关《TIA-707 07-B-2009 Data Service Option For Spread Spectrum Systems - Section 07《扩频系统数据服务选项 第07节》.pdf（108页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-707.07-B September 2009 Data Service Option For Spread Spectrum Systems - Section 07 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improv

2、ement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not con

3、forming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institu

4、te (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulato

5、ry requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-4617.07-UGRV2, formulated under the cognizance of the TIA TR-45.5 Su

6、bcommittee on Spread Spectrum Digital Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING

7、 PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of

8、 these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to req

9、uest permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document ma

10、y be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search o

11、r investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to in

12、vestigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-dis

13、criminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or other

14、wise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICU

15、LAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE ST

16、ATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTEN

17、TS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIA

18、BILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-707.07-B CONTENTS i1 INTRODUCTION . 1-1 1 1.1 General

19、Description 1-1 2 1.2 Terms . 1-1 3 1.3 References 1-3 4 1.3.1 Normative References . 1-3 5 1.3.2 Informative References . 1-6 6 2 REQUIREMENTS FOR THE FAX PROTOCOL STACK 2-1 7 2.1 Overview . 2-1 8 2.2 The Application Interface 2-2 9 2.3 Transport Layer 2-6 10 2.4 Network Layer. 2-8 11 2.4.1 General

20、 Requirements 2-8 12 2.4.2 Assignment of Network Address . 2-8 13 2.5 Data Link Layer 2-9 14 2.5.1 Sub-Network Dependent Convergence Function. 2-9 15 2.5.2 PPP Layer . 2-9 16 2.5.3 IPCP . 2-9 17 2.5.4 Link Control Protocol 2-10 18 3 REQUIREMENTS FOR THE RADIO INTERFACE . 3-1 19 3.1 Service Option Nu

21、mber . 3-1 20 3.2 Multiplex Option Interface 3-1 21 3.3 Procedures Using Service Negotiation 3-1 22 3.3.1 Mobile Station Requirements 3-1 23 3.3.2 BS/MSC Requirements 3-3 24 4 REQUIREMENTS FOR UMINTERFACE CALL PROCESSING 4-1 25 4.1 Connection Establishment 4-1 26 4.1.1 Mobile Origination 4-1 27 4.1.

22、2 Mobile Termination 4-2 28 4.1.3 Service Option Change to Analog Fax Service . 4-3 29 4.1.4 Conversation Substate . 4-4 30 4.1.5 Traffic Channel Handoff 4-5 31 TIA-707.07-B CONTENTS ii4.2 Connection Release 4-5 1 4.3 Authentication 4-6 2 5 MOBILE PROCEDURES . 5-1 3 5.1 Mobile Receiving Fax 5-3 4 5.

23、1.1 Mobile Connecting State 5-3 5 5.1.1.1 Wait for Local DIS Substate . 5-3 6 5.1.1.2 Wait for Remote DCS Substate 5-4 7 5.1.1.3 Wait for Local CFR/FTT Substate 5-4 8 5.1.2 Image Transfer State 5-5 9 5.1.3 Post Image Transfer State 5-6 10 5.1.3.1 EOP Substate 5-7 11 5.1.3.2 MPS Substate 5-7 12 5.1.3

24、.3 EOM Substate . 5-7 13 5.2 Mobile Transmitting Fax. 5-8 14 5.2.1 Mobile Connecting State 5-8 15 5.2.1.1 Wait For Remote DIS Substate. 5-8 16 5.2.1.2 Wait For Local DCS Substate. 5-9 17 5.2.1.3 Training Substate .5-10 18 5.2.2 Image Transfer State .5-11 19 5.2.3 Post Image Transfer State .5-11 20 5

25、.2.3.1 EOP Substate .5-12 21 5.2.3.2 MPS Substate .5-12 22 5.2.3.3 EOM Substate 5-12 23 5.2.3.4 Disconnect Substate.5-12 24 5.2.4 Flags.5-12 25 5.2.4.1 Transmitter Trained Flag 5-12 26 5.2.4.2 Receiver Trained Flag5-12 27 5.2.5 Rates 5-12 28 5.2.5.1 Receiver Rate5-12 29 5.2.5.2 Transmitter Rate.5-12

26、 30 6 IWF PROCEDURES 6-1 31 TIA-707.07-B CONTENTS iii6.1 Mobile Receiving Fax. 6-3 1 6.1.1 IWF Connecting State. 6-3 2 6.1.1.1 Wait For Remote DIS Substate. 6-3 3 6.1.1.2 Wait For Local DCS Substate . 6-4 4 6.1.1.3 Training Substate 6-5 5 6.1.2 Image Transfer State 6-6 6 6.1.3 Post Image Transfer St

27、ate. 6-7 7 6.1.3.1 EOP Substate. 6-7 8 6.1.3.2 MPS Substate 6-7 9 6.1.3.3 EOM Substate 6-8 10 6.1.3.4 Disconnect Substate 6-8 11 6.1.4 Flags 6-8 12 6.1.4.1 Transmitter Trained Flag 6-8 13 6.1.4.2 Receiver Trained Flag. 6-8 14 6.1.5 Rates 6-8 15 6.1.5.1 Receiver Rate . 6-8 16 6.1.5.2 Transmitter Rate

28、 6-8 17 6.2 Mobile Transmitting Fax . 6-9 18 6.2.1 IWF Connecting State. 6-9 19 6.2.1.1 Wait for Local DIS Substate . 6-9 20 6.2.1.2 Wait for Remote DCS Substate. 6-10 21 6.2.1.3 Wait for Local CFR/FTT Substate. 6-11 22 6.2.2 Image Transfer State 6-12 23 6.2.3 Post Image Transfer State. 6-13 24 6.2.

29、3.1 EOP Substate. 6-13 25 6.2.3.2 MPS Substate 6-13 26 6.2.3.3 EOM Substate 6-13 27 7 MESSAGES 7-1 28 7.1 Messages Over the Analog Interface 7-1 29 7.1.1 V.21 Messages 7-1 30 7.1.2 Image Data. 7-1 31 TIA-707.07-B CONTENTS iv7.1.3 IWF Identification and Capabilities Messages. 7-2 1 7.1.3.1 IWF NSF an

30、d IWF NSC Messages. 7-2 2 7.1.3.2 IWF NSS Message 7-4 3 7.2 Messages over the UmInterface 7-7 4 7.2.1 Control Messages. 7-7 5 7.2.2 Data Message. 7-8 6 7.2.3 Preamble Message 7-9 7 7.2.4 Max Rate Message.7-10 8 7.2.5 Start CED Message .7-12 9 7.3 Formatting octets over the Uminterface 7-13 10 7.3.1

31、Bit Format of Octets7-13 11 7.3.1.1 Control, Preamble, Max Rate, and Start CED Messages 7-13 12 7.3.2 Byte Escaping of Flags 7-13 13 8 CALL FLOWS . 8-1 14 8.1 Call Set-Up. 8-1 15 8.1.1 Calls Originating as Analog Fax 8-2 16 8.1.2 Calls Originating as Voice, then Transitioning to Analog Fax 8-4 17 8.

32、2 IWF and MT2 Procedures During Conversation State 8-8 18 9 TIMERS 9-1 19 10 DIS/DTC MODIFICATIONS .10-1 20 11 AT COMMAND PROCESSING 11-1 21 11.1 General Requirements .11-1 22 11.2 Basic AT Command Processing11-1 23 11.2.1 Action Commands 11-1 24 11.2.2 Basic Result Codes.11-2 25 11.3 AT Command Set

33、 Extensions for Modem Control.11-3 26 11.4 Cellular AT Command Processing 11-3 27 11.4.1 AT+CVF Command Processing11-3 28 11.4.2 AT+CVFQ? Command Processing .11-4 29 11.4.3 AT+CFG Command Processing .11-4 30 31 TIA-707.07-B FIGURES vFigure 2.1-1. The Analog Fax Protocol Stack Architecture 2-1 1 Figu

34、re 5.1-1. MT2 RX Fax Layer States in a Mobile Receiving Fax Call. 5-3 2 Figure 5.2-1. MT2 TX Fax Layer States in a Mobile Transmitting Fax Call 5-8 3 Figure 6.1-1. IWF TX Fax Layer States in a Mobile Receiving Fax Call 6-3 4 Figure 6.2-1. IWF RX Fax Layer States in a Mobile Transmitting Fax Call 6-9

35、 5 Figure 7.1-1. T.30 V.21 Message Format 7-1 6 Figure 8-1. Message and Signal Representation Used in Call Flows 8-1 7 Figure 8.1.1-1. Call Set-Up for a Mobile Receiving Fax Call Initiated as Analog Fax 8-2 8 Figure 8.1.1-2. Call Set-Up for a Mobile Transmitting Fax Call Initiated as Analog Fax 8-3

36、9 Figure 8.1.2-1. Call Set-Up as Voice Transitioning to Mobile Receiving Fax. Voice Call 10 Shown as Mobile-Terminated and Fax Call Detected Using V.21 Preamble Detection.8-4 11 Figure 8.1.2-2. Call Set-Up as Voice Transitioning to Mobile Receiving Fax. Voice Call 12 Shown as Mobile-Originated and F

37、ax Call Detected Using V.21 Preamble Detection. 8-5 13 Figure 8.1.2-3. Call Set-Up as Voice Transitioning to Mobile Transmitting Fax. Voice Call 14 Shown as Mobile-Originated and Fax Call Detected Using V.21 Preamble Detection. 8-6 15 Figure 8.1.2-4. Call Set-Up as Voice Transitioning to Mobile Tran

38、smitting Fax. Voice Call 16 Shown as Mobile-Terminated and Fax Call is Detected Using V.21 Preamble Detection.8-7 17 Figure 8.2-1. Typical Mobile Receiving Fax Call Where the Initial Fax Training Rate from 18 the Transmitting Fax Machine is Supported by the Air Interface . 8-8 19 Figure 8.2-2. Mobil

39、e Receiving Fax Call Where the Initial Fax Training Rate from the 20 Transmitting Fax Machine is Not Supported by the Air Interface. 8-9 21 Figure 8.2-3. Mobile Receiving Fax Call Where the Receiving Fax Machine Rejects the 22 Initial Training Rate 8-10 23 Figure 8.2-4. Mobile Receiving Fax Call Ill

40、ustrating the Use of Timer T138-11 24 Figure 8.2-5. Mobile Receiving Fax Call with an RTP Response from the RX Fax Machine8-12 25 Figure 8.2-6. Mobile Receiving Fax Call Illustrating Polling (the TE2 has a document to 26 send which the PSTN fax machine retrieves) . 8-13 27 Figure 8.2-7. Mobile Recei

41、ving Fax Call with Corrupted HDLC Frames (corrupted DCS and 28 CFR) . 8-14 29 Figure 8.2-8. Mobile Receiving Fax Call with Corrupted HDLC frames and Fax CRP Option 30 (corrupted CFR, MPS, and MCF) . 8-15 31 32 TIA-707.07-B TABLES vi Table 2.2-1. IP Type of Service . 2-3 1 Table 2.2-2. Compression Op

42、tions . 2-5 2 Table 2.2-3. Group 3 Fax Compression Options. 2-6 3 Table 3.3.1-1. Valid Service Configuration Attributes for Service Option 20 . 3-2 4 Table 3.3.1-2. Valid Service Configuration Attributes for Service Option 21 . 3-2 5 Table 5.1.1.3-1. MSLT Resetting in the DCS 5-5 6 Table 6.2.1.3-1.

43、MSLT Resetting in the DCS .6-11 7 Table 7.1.3.1-1. IWF NSF and IWF NSC Message Format. 7-2 8 Table 7.1.3.1-2. FIF Format for the IWF NSF and IWF NSC Messages . 7-3 9 Table 7.1.3.1-3. INFO Field Format for TYPE=0x00 Information Element . 7-4 10 Table 7.1.3.1-4. INFO Field Format for TYPE=0x01 Informa

44、tion Element . 7-4 11 Table 7.1.3.1-5. INFO Field Format for TYPE=0x02 Information Element . 7-4 12 Table 7.1.3.2-1. IWF NSS Message Format 7-5 13 Table 7.1.3.2-2. FIF Format for the IWF NSS Message 7-5 14 Table 7.1.3.2-3. INFO Field Format for TYPE=0x00 Information Element . 7-6 15 Table 7.1.3.2-4.

45、 INFO Field Format for TYPE=0x01 Information Element . 7-7 16 Table 7.2.1-1. Control Message Format 7-8 17 Table 7.2.2-1. Data Message Format 7-9 18 Table 7.2.3-1. Preamble Message Format7-10 19 Table 7.2.4-1. Max Rate Message Format7-11 20 Table 7.2.4-2. FIF Values for the Max Rate Message .7-11 21

46、 Table 7.2.5-1. Start CED Message Format 7-12 22 Table 10-1. Rate Bit Modifications 10-1 23 Table 10-2. MSLT Bit Modification 10-2 24 Table 11.2.1-1. Basic Action Commands.11-2 25 Table 11.2.2-1. Basic Result Codes.11-2 26 Table 11.3-1. IWF to Mobile Station Commands11-3 27 28 TIA-707.07-B 1-1 1 INT

47、RODUCTION 1 1.1 General Description 2 Service Options 20 and 21 provide Analog Group-3 facsimile (abbreviated as “fax” 3 hereafter) transmission on cdma2000 1wideband spread spectrum systems using the 4 protocols and procedures defined herein. 5 Service Option 20 provides analog group 3 fax service

48、using a default service configuration 6 including Multiplex Option 1 data rates. Service Option 21 provides group 3 fax service 7 using a default service configuration including Multiplex Option 2 data rates. Other 8 combinations of service configuration attributes are available for these service op

49、tions 9 through the use of service negotiation procedures. 10 1.2 Terms 11 Analog Fax Layer. The functional layer in the MT2 or IWF that processes T.30 messages 12 from the fax machine and the over the air messages from the Uminterface. In the MT2, the 13 Analog Fax Layer operates between the Uminterface to the IWF and the RJ-11 interface to 14 the TE2. In the IWF, the Analog Fax Layer operates between the Uminterface to the MT2 15 and the PSTN interface to the PSTN fax machine. 16 AT Command Set. Command set interface between data terminal equipment (DTE) and 17 data circuit termin