SMPTE ST 435-1-2012 10 Gb s Serial Signal Data Interface - Part 1 Basic Stream Derivation.pdf

《SMPTE ST 435-1-2012 10 Gb s Serial Signal Data Interface - Part 1 Basic Stream Derivation.pdf》由会员分享，可在线阅读，更多相关《SMPTE ST 435-1-2012 10 Gb s Serial Signal Data Interface - Part 1 Basic Stream Derivation.pdf（17页珍藏版）》请在麦多课文档分享上搜索。

1、 Copyright 2012 by THE SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS 3 Barker Avenue, White Plains, NY 10601 (914) 761-1100 Approved August 1, 2012 Table of Contents Page Foreword 2 Intellectual Property . 2 Introduction 2 1 Scope . 3 2 Conformance Notation . 3 3 Normative References . 3 4 Defi

2、nition of Terms . 4 5 System Overview . 5 6 Source Signal Formats . 5 6.1 1.5 Gb/s Class . 5 6.2 Dual Link 1.5 Gb/s Class 6 6.3 Quad Link 1.5 Gb/s Class . 7 6.3.1 4 way division of source data . 8 6.4 Octa Link 1.5 Gb/s Class 9 6.4.1 8 way division of source data . 10 7 Payload Identifier . . 13 7.1

3、 Payload Identifier for 1.5 Gb/s Class 13 7.2 Payload Identifier for Dual Link 1.5 Gb/s Class 13 7.3 Payload Identifier for Quad Link 1.5 Gb/s Class . 13 7.4 Payload Identifier for Octa Link 1.5 Gb/s Class 15 7.5 Placement of Payload Identifier 16 Annex A SMPTE ST 435 Document Road Map (Informative)

4、 17 Page 1 of 17 pages SMPTE ST 435-1:2012Revision of SMPTE 435-1-2009 SMPTE STANDARD 10 Gb/s Serial Signal/Data Interface Part 1: Basic Stream Derivation SMPTE ST 435-1:2012 Page 2 of 17 pages Foreword SMPTE (the Society of Motion Picture and Television Engineers) is an internationally-recognized s

5、tandards developing organization. Headquartered and incorporated in the United States of America, SMPTE has members in over 80 countries on six continents. SMPTEs Engineering Documents, including Standards, Recommended Practices and Engineering Guidelines, are prepared by SMPTEs Technology Committee

6、s. Participation in these Committees is open to all with a bona fide interest in their work. SMPTE cooperates closely with other standards-developing organizations, including ISO, IEC and ITU. SMPTE Engineering Documents are drafted in accordance with the rules given in Part XIII of its Operations M

7、anual. SMPTE ST 435-1 was prepared by Technology Committee 32NF. Intellectual Property SMPTE draws attention to the fact that it is claimed that compliance with this Standard may involve the use of one or more patents or other intellectual property rights (collectively, “IPR“). The Society takes no

8、position concerning the evidence, validity, or scope of this IPR. Each holder of claimed IPR has assured the Society that it is willing to License all IPR it owns, and any third party IPR it has the right to sublicense, that is essential to the implementation of this Standard to those (Members and n

9、on-Members alike) desiring to implement this Standard under reasonable terms and conditions, demonstrably free of discrimination. Each holder of claimed IPR has filed a statement to such effect with SMPTE. Information may be obtained from the Director, Standards or that a certain course of action is

10、 preferred but not necessarily required; or that (in the negative form) a certain possibility or course of action is deprecated but not prohibited. The keywords “may“ and “need not“ indicate courses of action permissible within the limits of the document. The keyword “reserved” indicates a provision

11、 that is not defined at this time, shall not be used, and may be defined in the future. The keyword “forbidden” indicates “reserved” and, in addition, indicates that the provision will never be defined in the future. A conformant implementation according to this document is one that includes all man

12、datory provisions (“shall“) and, if implemented, all recommended provisions (“should“) as described. A conformant implementation need not implement optional provisions (“may“) and need not implement them as described. 3 Normative References Note: All references in this document to other SMPTE docume

13、nts use the current numbering style (e.g. SMPTE ST 274:2008) although, during a transitional phase, the document as published (printed or PDF) may bear an older designation (such as SMPTE 274M-2008). Documents with the same root number (e.g. 274) and publication year (e.g. 2008) are functionally ide

14、ntical. The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to i

15、nvestigate the possibility of applying the most recent edition of the standards indicated below. SMPTE ST 274:2008, Television 1920 1080 Image Sample Structure, Digital Representation and Digital Timing Reference Sequences for Multiple Picture Rates SMPTE ST 435-1:2012 Page 4 of 17 pages SMPTE ST 29

16、1:2011, Ancillary Data Packet and Space Formatting SMPTE ST 292-1:2012, 1.5 Gb/s Signal/Data Serial Interface SMPTE ST 296:2012, 1280 720 Progressive Image 4:2:2 and 4:4:4 Sample Structure Analog and Digital Representation and Analog Interface SMPTE ST 299-1:2009, 24-Bit Digital Audio Format for SMP

17、TE 292 Bit-Serial Interface SMPTE ST 352:2011, Payload Identification Codes for Serial Digital Interfaces SMPTE ST 372:2011, Dual Link 1.5 Gb/s Digital Interface for 1920 1080 and 2048 1080 Picture Formats SMPTE ST 428-9:2008, D-Cinema Distribution Master Image Pixel Structure Level 3 Serial Digital

18、 Interface Signal Formatting SMPTE ST 428-19:2010, D-Cinema Distribution Master Additional Frame Rates Level AFR2 and Level AFR4 Serial Digital Interface Signal Formatting SMPTE ST 2036-1:2009, Ultra High Definition Television Image Parameter Values for Program Production SMPTE ST 2048-1:2011, 2048

19、1080 and 4096 2160 Digital Cinematography Production Image Formats FS/709 SMPTE ST 2048-2:2011, 2048 1080 Digital Cinematography Production Image FS/709 Formatting for Serial Digital Interface Recommendation ITU-R BT.1769, Parameter Values for an Expanded Hierarchy of LSDI Image Formats for Producti

20、on and International Programme Exchange 4 Definition of Terms 4.1 Basic Stream a 10-bit parallel stream which has the same structure as the interleaved data stream defined in SMPTE ST 292-1. This interleaved data stream carries the image structure defined in the source format data defined in SMPTE S

21、T 292-1 4.2 CRC Cyclic Redundancy Check Codes defined in SMPTE ST 292-1 4.3 EAV the term EAV used in this standard designates 4 bytes of timing information at the end of the active video area 4.4 HANC Data data included in the digital line blanking interval between EAV/LN/CRC and SAV 4.5 LN Line Num

22、ber data defined in SMPTE ST 292-1 4.6 SAV timing information at the start of the active video area as defined in SMPTE ST 292-1 SMPTE ST 435-1:2012 Page 5 of 17 pages 5 System Overview The source data of the 10 Gb/s data stream shall be composed of multiple Basic Streams that each comply with the 1

23、.5 Gb/s SDI interleaved data stream defined in SMPTE ST 292-1. Ancillary data mapping into a Basic Stream, shall comply with SMPTE ST 291. Audio data, mapping shall comply with SMPTE ST 299-1. Each 10-bit Basic Stream is packed into an 8-bit data block structure, which is then 8B/10B encoded. Multip

24、le encoded blocks are multiplexed and serialized into a single 10 Gb/s data stream in one of several modes as defined in SMPTE ST 435-2. The physical interface specification is defined in SMPTE ST 435-3. The basic 1.5 Gb/s stream structure is shown in Figure 1. Figure 1 Structure of 1.5 Gb/s Basic S

25、tream (Informative) 6 Source Image Formats 6.1 Single Link 1.5 Gb/s Class Image Formats Table 1 defines the image formats that shall be mapped into one Basic Stream structure compliant with SMPTE ST 292-1. The interleaved stream derived from each image format shall be assigned to a single Basic Stre

26、am defined in this standard. Table 1 Single Link 1.5 Gb/s Class Source Image Formats System Number Reference SMPTE Standard Picture Format Signal Format sampling structure/pixel Depth Frame/Field Rates 1.1 ST 274 1920 1080 4:2:2 (YCBCR)/10-bit 24, 25 and 30 Frames/s Progressive, PsF 50 and 60 Fields

27、/s Interlace 23.98 and 29.97 Frames/s Progressive, PsF 59.94 Fields/s Interlace ST 2048-2 2048 1080 4:2:2 (YCBCR)/10-bit 24, 25 and 30 Frames/s Progressive, PsF 23.98 and 29.97 Frames/s Progressive, PsF 1.2 ST 296 1280 720 4:2:2 (YCBCR)/10-bit 50 and 60 Frames/s Progressive 59.94 Frames/s Progressiv

28、e CEAV(3FFh)YEAV(3FFh)CEAV(000h)YEAV(000h)CEAV(000h)YEAV(000h)CEAV(XYZ)YEAV(XYZ)CLN0YLN0CLN1YLN1CCRC0YCRC0CCRC1YCRC1CANC0YANC0 HANC Data CANCnYANCn CSAV(3FFh)YSAV(3FFh)CSAV(000h)YSAV(000h)CSAV(000h)YSAV(000h)CSAV(XYZ)YSAV(XYZ)C0Y0C1Y1C2Y2: SMPTE ST 435-1:2012 Page 6 of 17 pages 6.2 Dual Link 1.5 Gb/

29、s Class Image Formats Table 2 defines the image formats that shall be mapped into two Basic Streams. A source stream shall be divided into two Basic Streams which have the same structure as dual link stream defined in SMPTE ST 372. Table 2 Dual Link 1.5 Gb/s Class Source Image Formats System Number

30、Reference SMPTE Standard Picture Format Signal Format sampling structure/pixel Depth Frame/Field Rates 2.1 ST 274 1920 1080 4:2:2 (YCBCR)/10-bit 50 and 60 Frames/s Progressive 59.94 Frames/s Progressive ST 2048-2 2048 1080 4:2:2 (YCBCR)/10-bit 48, 50 and 60 Frames/s Progressive 47.95 and 59.94 Frame

31、s/s Progressive 2.2 ST 274 1920 1080 4:4:4 (RGB), 4:4:4:4 (RGB+A)/10-bit 24, 25,and 30 Frames/s Progressive, PsF 50 and 60 Fields/s Interlace 23.98 and 29.97 Frames/s Progressive, PsF 59.94 Fields/s Interlace ST 2048-2 2048 1080 4:4:4 (RGB1), 4:4:4:4 (RGB1+A)/10-bit 24, 25 and 30 Frames/s Progressiv

32、e, PsF 23.98 and 29.97 Frames/s Progressive, PsF 2.3 ST 274 1920 1080 4:4:4 (RGB)/12-bit 24, 25 and 30 Frames/s Progressive, PsF 50 and 60 Fields/s Interlace 23.98 and 29.97 Frames/s Progressive, PsF 59.94 Fields/s Interlace ST 2048-2 2048 1080 4:4:4 (RGB1)/12-bit 24, 25 and 30 Frames/s Progressive,

33、 PsF 23.98 and 29.97 Frames/s Progressive, PsF 2.4 ST 274 1920 1080 4:4:4 (YCBCR)/10-bit, 4:4:4:4 (YCBCR+A) /10-bit 24, 25 and 30 Frames/s Progressive, PsF 50 and 60 Fields/s Interlace 23.98 and 29.97 Frames/s Progressive, PsF 59.94 Fields/s Interlace ST 2048-2 2048 1080 4:4:4 (YCBCR)/10-bit, 4:4:4:

34、4 (YCBCR+A) /10-bit 24, 25 and 30 Frames/s Progressive, PsF 23.98 and 29.97 Frames/s Progressive, PsF SMPTE ST 435-1:2012 Page 7 of 17 pages 2.5 ST 274 1920 1080 4:2:2 (YCBCR), 4:4:4 (YCBCR) /12-bit 24, 25 and 30 Frames/s Progressive, PsF 50 and 60 Fields/s Interlace 23.98 and 29.97 Frames/s Progres

35、sive, PsF 59.94 Fields/s Interlace ST 2048-2 2048 1080 4:2:2 (YCBCR), 4:4:4 (YCBCR) /12-bit 24, 25 and 30 Frames/s Progressive, PsF 23.98 and 29.97 Frames/s Progressive, PsF 2.6 ST 428-9 2048 1080 4:4:4 (XYZ)/12-bit 24 Frames/s Progressive, PsF ST 428-19 2048 1080 4:4:4 (XYZ)/12-bit 25 and 30 Frames

36、/s Progressive, PsF 1RGB indicates either RGB or RFSGFSBFS. 6.3 Quad Link 1.5 Gb/s Class Image Formats Table 3 defines the image formats that shall be mapped into four Basic Streams as defined in Section 6.3.1. Table 3 Quad Link 1.5 Gb/s Class Source Image Formats System Number Reference SMPTE Stand

37、ard Picture Format Signal Format sampling structure/pixel Depth Frame/Field Rates 4.1 ST 274 1920 1080 4:2:2 (YCBCR)/12-bit 50 and 60 Frames/s Progressive 59.94 Frames/s Progressive ST 2048-2 2048 1080 4:2:2 (YCBCR)/12-bit 50 and 60 Frames/s Progressive 59.94 Frames/s Progressive 4.2 ST 274 1920 108

38、0 4:4:4 (RGB), 4:4:4:4 (RGB+A)/10-bit 50 and 60 Frames/s Progressive 59.94 Frames/s Progressive ST 2048-2 2048 1080 4:4:4 (RGB1), 4:4:4:4 (RGB1+A)/10-bit 48, 50 and 60 Frames/s Progressive 47.95 and 59.94 Frames/s Progressive 4.3 ST 274 1920 1080 4:4:4 (RGB)/12-bit 50 and 60 Frames/s Progressive 59.

39、94 Frames/s Progressive ST 2048-2 2048 1080 4:4:4 (RGB1)/12-bit 48, 50 and 60 Frames/s Progressive 47.95 and 59.94 Frames/s Progressive 1 RGB indicates either RGB or RFSGFSBFS. SMPTE ST 435-1:2012 Page 8 of 17 pages 6.3.1 4 way division of source data A pair of frames as defined in Table 3 shall be

40、divided and mapped into two Sub images equivalent to the System 2.2, 2.3 or System 2.5 image data using the line demultiplexing method illustrated in Figure 2 of SMPTE ST 372. Each of these Sub images shall be word demultiplexed into two Basic Streams as defined in SMPTE ST 372. In this document, Su

41、b image shall have the active digital sample structure as defined in SMPTE ST 274 or SMPTE ST 2048-2. Figure 2 defines 4 way division of the System 4.1, 4.2, and 4.3 streams. Figure 2 4 way division for source stream of System 4.1, 4.2, and 4.3 6.4 Octa Link 1.5 Gb/s Class Table 4 lists the image fo

42、rmats that shall be mapped into eight Basic Streams. Each of the 4K image formats listed in Table 4 shall be divided and mapped to the active area of four 2K Sub images by one of two methods and then each Sub image shall be converted into two Basic Streams. The detail of the process is defined in Se

43、ction 6.4.1. Basic Stream CH 1 (Link A)System 2.3_channel 1System 4.3Basic Stream CH 2 (Link B)Basic Stream CH 3 (Link A)Basic Stream CH 4 (Link B)System 2.3_channel 2As shown in Figure 2 of SMPTE ST 372 As shown in Figure 5 of SMPTE ST 372Basic Stream CH 1 (Link A)System 2.2_channel 1System 4.2Basi

44、c Stream CH 2 (Link B)Basic Stream CH 3 (Link A)Basic Stream CH 4 (Link B)System 2.2_channel 2As shown in Figure 2 of SMPTE ST 372 As shown in Figure 3 of SMPTE ST 372Basic Stream CH 1 (Link A)System 2.5_channel 1System 4.1Basic Stream CH 2 (Link B)Basic Stream CH 3 (Link A)Basic Stream CH 4 (Link B

45、)System 2.5_channel 2As shown in Figure 2 of SMPTE ST 372 As shown in Figure 9 of SMPTE ST 372SMPTE ST 435-1:2012 Page 9 of 17 pages Table 4 Octa Link 1.5 Gb/s Class Source Image Formats System Number Reference SMPTE/ITU Standard Picture Format Signal Format sampling structure/pixel Depth Frame/Fiel

46、d Rates 8.2 Rec. ITU-R BT.1769 3840 2160 4:2:0 (YCBCR), 4:2:2 (YCBCR)/10-bit 24, 25 and 30 Frames/s Progressive2ST2036-1 23.98 and 29.97 Frames/s Progressive ST2048-1 4096 2160 4:2:2 (YCBCR)/10-bit 24, 25 and 30 Frames/s Progressive 23.98 and 29.97 Frames/s Progressive 8.3 Rec. ITU-R BT.1769 3840 21

47、60 4:4:4 (RGB)/10-bit 24, 25 and 30 Frames/s Progressive2 ST2036-1 23.98 and 29.97 Frames/s Progressive ST2048-1 4096 2160 4:4:4 (RGB1), 4:4:4:4 (RGB1+A)/10-bit 24, 25 and 30 Frames/s Progressive 23.98 and 29.97 Frames/s Progressive 8.4 Rec. ITU-R BT.1769 3840 2160 4:4:4 (YCBCR)/10-bit 24, 25 and 30

48、 Frames/s Progressive2ST2036-1 23.98 and 29.97 Frames/s Progressive ST2048-1 4096 2160 4:4:4 (YCBCR)/10-bit 24, 25 and 30 Frames/s Progressive 23.98 and 29.97 Frames/s Progressive 8.5 Rec. ITU-R BT.1769 3840 2160 4:2:0 (YCBCR), 4:2:2 (YCBCR)/12-bit 24, 25 and 30 Frames/s Progressive2ST2036-1 23.98 and 29.97 Frames/s Progressive ST2048-1 4096 2160 4:2:2 (YCBCR)/12-bit 24, 25 and 30 Frames/s Progressive 23.98 and 29.97 Frames/s Progressive 8.6 Rec. ITU-R BT.1769 3840 2160 4:4:4 (RGB)/12-bit 24, 25 and 30 Frames/s Progressive2ST2036-1 23.98 and 29.97 Frames/s Progressive ST2048-1 4096 2160 4: