NEMA C136 3-2014 Roadway and Area Lighting Equipment - Luminaire Attachments.pdf

《NEMA C136 3-2014 Roadway and Area Lighting Equipment - Luminaire Attachments.pdf》由会员分享，可在线阅读，更多相关《NEMA C136 3-2014 Roadway and Area Lighting Equipment - Luminaire Attachments.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C136.3-2014Roadway and AreaLighting Equipment Luminaire AttachmentsANSI C136.3-2014 American National Standard for Roadway and Area Lighting Equipment Luminaire Attachments Secretariat: National Electrical Manufacturers Asso

2、ciation Approved: November 24, 2014 American National Standards Institute, Inc. 2014 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the doc

3、ument at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. American National Standards Institute, Inc. (ANSI) standards and guideline publications, of which the document contained her

4、ein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process and establishes rules to promote fair

5、ness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any perso

6、nal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied,

7、as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers prod

8、ucts or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else.

9、 Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be av

10、ailable from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs,

11、or installations for safety or health purposes. Any certification or other statement of compliance with any health- or safety-related information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. ANSI C136.3-2014 2014 Nati

12、onal Electrical Manufacturers Association i AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by the American National Standards Institute, Inc. (ANSI) that the requirements for due process, consensus, and other criteria for approval have been met by the stan

13、dards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means significantly more than a simple majority, but not necessarily unanimity. Consensus

14、 requires that all views and objections be considered, and a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether they have approved the standards or not, from: manufacturing

15、, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute, Inc., does not develop standards, and will under no circumstances give an interpretation of any American National Standard. Moreover, no person shall have

16、the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute, Inc. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This

17、 American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute, Inc., require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information

18、on all standards by calling or writing the American National Standards Institute, Inc. Published by National Electrical Manufacturers Association 1300 North 17th Street, Suite 900, Rosslyn, VA 22209 2014 National Electrical Manufacturers Association. All rights, including translation into other lang

19、uages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American copyright conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, w

20、ithout the prior written permission of the publisher. Printed in the United States of America ANSI C136.3-2014 ii 2014 National Electrical Manufacturers Association Foreword At the time this standard was approved, the ANSI C136 committee was composed of the following members: Alabama Power Company A

21、merican Electric Lighting Caltrans Ceravision City of Kansas City, Missouri City of Los Angeles, Bureau of Street Lighting Cree, Inc. Duke Energy Duke Energy Florida Eatons Cooper Lighting Edison Electric Institute EPRI EYE Lighting International of N.A., Inc. Florida Power Phone: (303) 397-7956, Fa

22、x (303) 397-2740; e-mail: ; or . 4 SIDE-MOUNTED LUMINAIRES 4.1 Luminaire Heads Conforming to ANSI C136.6 The slipfitter shall have provisions for clamping the luminaire securely to the tenon in accordance with sizes specified in Table 1 and for leveling through no less than 2 from the axis of attach

23、ment. It shall be provided with a shoulder or stop to limit the insertion of the tenon. ANSI C136.3-2014 2 2014 National Electrical Manufacturers Association Table 1 Slipfitter Requirements for Section 4.1 Tenon Pipe Pipe Outer Diameter, inches (mm) Maximum Allowable Insertion Length, inches (mm) 1

24、in. 1.660 (42.16) 0.040 (1.02) 3.75 (95.25) 2 in. 2.375 (60.33) 0.040 (1.02) 5.125 (130.18) NOTEThe portion of the pipe intended to enter the luminaire is defined as the tenonNominal Pipe Size (NPS). 4.2 Luminaire Heads Conforming to ANSI C136.14 The slipfitter shall have provisions for clamping the

25、 luminaire securely to the tenon in accordance with sizes specified in Table 2 and for leveling through no less than 3 from the axis of attachment. It shall be provided with a shoulder or stop to limit the insertion of the tenon. Table 2 Slipfitter Requirements for Section 4.2 Tenon Pipe Pipe Outer

26、Diameter, inches (mm) Maximum Allowable Insertion Length, inches (mm) 1 in. 1.660 (42.16) 0.040 (1.02) 7.5 (190.5) 2 in. 2.375 (60.33) 0.040 (1.02) 10 (254.0) NOTEThe portion of the pipe intended to enter the luminaire is defined as the tenonNPS. 4.3 Luminaire Heads Other Than Those Covered in 4.1 a

27、nd 4.2 The slipfitter shall conform to the requirements of 4.2. 5 POST TOPMOUNTED LUMINAIRES The slipfitter shall have provisions for attaching the luminaire securely to the post (or pole) tenon in accordance with sizes specified in Table 3. It shall be provided with a shoulder or stop to limit the

28、insertion of the pole tenon. Tenons are described in ANSI C136.21. Table 3 Slipfitter Requirements for Section 4.3 Projected Area, ft2 (m2) Pole Tenon Outer Diameter, inches (mm) Maximum Allowable Insertion Depth, inches (mm) Less than 8 (.743) 2.38 (60.33) 0.040 (1.02) 2.88 (73.0) 0.16 (4.0) 3.75 (

29、95.25) 3.75 (95.25) 8 (.743) 14 (1.3) 4 (101.6) 0.125 (3.18) 12 (304.8) NOTEThe portion of the pipe intended to enter the luminaire is defined as the tenonNPS. ANSI C136.3-2014 2014 National Electrical Manufacturers Association 3 6 PENDANT-MOUNTED LUMINAIRES 6.1 NPT Thread Mount The luminaire/mounti

30、ng housing shall be tapped with internal 1 in., 1 in., or 2 in. NPT pipe threads, per ANSI B1.20.1. The luminaires shall also have provisions for applying a wrench to tighten as per manufacturers specifications and to provide anti-rotation. 6.2 Ball and Socket Mount Ball and Socket mount shall have

31、restriction ring securely attached to the luminaire. Restriction ring shall be designed to be securely clamped inside an arm and/or adapter bracket. The adapter bracket, if used, shall meet Section 4.2. 6.3 Moisture Mitigation The luminaire attachment shall be designed so as to prevent water from en

32、tering the luminaire once installed, as recommended by luminaire manufacturer. If application of sealant is necessary to properly seal the luminaire once installed, luminaire manufacturers installation instructions shall be followed. NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB