FORD SB1-27A-1992 100% KEVLAR TUBULAR RIB-KNIT SLEEVE WITH THUMB SLOT《带拇指槽的100% KEVLAR管状凸纹针织套管》.pdf

《FORD SB1-27A-1992 100% KEVLAR TUBULAR RIB-KNIT SLEEVE WITH THUMB SLOT《带拇指槽的100% KEVLAR管状凸纹针织套管》.pdf》由会员分享，可在线阅读，更多相关《FORD SB1-27A-1992 100% KEVLAR TUBULAR RIB-KNIT SLEEVE WITH THUMB SLOT《带拇指槽的100% KEVLAR管状凸纹针织套管》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、PGRDMANUl?AGTURINGSTANUARDS SBl-27A MARCH 1992 100% REVMR TUBti RIB-RNIT SBl-27A SLEEVE WITH THUMB SLOT Page 1 1; 2. 3. 4. 5. USAGE: This sleeve is designed for use by personnel needing a greater degree of arm protection. The use of this sleeve must be approved by the SafetyUnit. MATERIAL: 100% pure

2、 and unblended Kevlar 11/l yarn. Thumb slot overcasted in 2/300 Revlar yarn. SIZE: LARGE - Overall length shall be 18 inches (457mm). Width shall be 3 inches (76rmn). Thumb slot shall be elliptical in design with a measured opening of 2-l/4 inches (57mm). Thickness shall be .240 inches (6xm) +/- 5.0

3、0%. CONSTRTJCTION : Sleeve shall be seamless and knitted of 11/l Kevlar yarn. MANtlFACTURERS RESPONSIBILITY: All material supplied to this standard must be equivalent in all characteristics to the material upon which approval was originally granted, and shall be satisfactory for the intended application.