FORD FLTM BN 112-03-2006 DEGREE OF SOIL TRANSFER TO LEATHER AND POLYMERIC FABRIC-S《皮革和聚合物织物的污物转移度》.pdf

《FORD FLTM BN 112-03-2006 DEGREE OF SOIL TRANSFER TO LEATHER AND POLYMERIC FABRIC-S《皮革和聚合物织物的污物转移度》.pdf》由会员分享，可在线阅读，更多相关《FORD FLTM BN 112-03-2006 DEGREE OF SOIL TRANSFER TO LEATHER AND POLYMERIC FABRIC-S《皮革和聚合物织物的污物转移度》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 FORD LABORATORY TEST METHODBN 112-03Date Action Revisions 2006 12 11 Activated C. Leslie Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1 of 3 DEGREE OF SOIL TRANSFER TO LEATHER AND POLYMERIC FABRICS Application This method is used to determine the resistance to

2、soil impregnation of vinyl, leather and fabrics used in seating and other interior trim applications by rubbing or mechanically abrading the surface of the test specimen with a standard soil test fabric. Apparatus and Materials Required Stoll Universal Wear Tester: UWT M282, or equivalent Source: SD

3、LAtlas P.O. Box 162, Crown Royal Shawcross St. Stockport SK1 3JW England Phone: 44 (0) 161 480 8485 Fax: 44 (0) 161 480 8580 http:/ or SDLAtlas 1813A Associates Lane Charlotte, NC 28217-2956 Phone: 704 329 0911 Fax: 704 329 0914 http:/ Colorimeter Used for color difference measurement. Shall be eith

4、er a spectro-photometer or a tristimulus colorimeter, and shall be capable of providing the following: Color Scale CIE L* a* b* Observer 10 Illuminant D 65 Sample port size 10 mm Light source 6.35 mm dia Source: Any reputable manufacturer of colorimeters or spectrophotometers capable of providing in

5、struments with the above mentioned characteristics. FORD LABORATORY TEST METHODBN 112-03Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 2 of 3 Cotton Soil Test Cloth A standard soil test cloth impregnated with a specially formulated soil meeting the requirements of

6、 the Ford Soil Test Cloth or the STC EMPA 106, Carbon Black and Mineral Oil Cloth both available from: Source: Testfabrics, Inc. P.O. Box 26 415 Delaware Ave West Pittston, PA 18643 U.S.A. Phone: 570 603 0432 Fax: 570 603 0433 NOTE: The standard soil cloth should be store under standard lab conditio

7、ns of 23 +/- 2 C and 50 +/- 5% RH in a light filtering cabinet or location. Cleaning Agents Carpets and Fabrics Motorcraft Professional Strength Carpet and Upholstery Cleaner, Service Part number ZC-54 or Ford recommended equivalent Available from Ford dealers in the US and Canada. Or contact: Ford

8、Customer Service Division Service Chemicals and Lubricants Repair Product Planning Phone: 734 523 3061 Or Testfabrics, Inc. P.O. Box 26 415 Delaware Ave West Pittston, PA 18643 U.S.A. Phone: 570 603 0432 Fax: 570 603 0433 Instrument Panel, Vinyl, Leather, Painted and Unpainted Plastics, and Elastome

9、rs Motorcraft Deluxe Leather and Vinyl Cleaner, Service Part Number ZC-11-A, 16 fluid ounces or Ford Motor Company recommended equivalents Available from Ford dealers in US. Canadian suppliers should Dennis Hackett or Matthew Cates contact the manufacturer: Excelda Manufacturing Phone: 248 486 3800

10、Or contact: Ford Customer Service Division Service Chemicals and Lubricants Repair Product Planning Phone: 313 337 5441 FORD LABORATORY TEST METHODBN 112-03Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 3 of 3 Or Testfabrics, Inc. P.O. Box 26 415 Delaware Ave West

11、 Pittston, PA 18643 U.S.A. Phone: 570 603 0432 Fax: 570 603 0433 Conditioning and Test Conditions All test values indicated herein are based on material conditioned in a controlled atmosphere of 23 +/- 2 C and 50 +/- 5% relative humidity for not less than 24 h prior to testing and tested under the s

12、ame conditions unless otherwise specified. Procedure for Determining/Reporting the Soiling of the Test Specimen 1. Prepare six die cut 110 mm diameter test specimens. 2. Insert a new 75 x 200 mm strip of the soil cloth in the Stoll Universal Wear Tester or advance to an untested area of the current

13、strip. 3. Clamp the test specimen into the bottom section of the wear tester. The rubber diaphragm located beneath the specimen should be used without the metal contact pin in the center. 4. Apply a 0.91 kg head load and adjust the air pressure under the diaphragm to 21 kPa (nominal value) to obtain

14、 a soiled area of 30 +/- 5 mm. Lower the head containing the cotton soil test fabric and run for 500 cycles (approximately 4 minutes) or as specified on the engineering document. Note: If the test increases the gloss of the test specimen then repeat Steps 2, 3 and 4 using a piece of the soil test cl

15、oth that does not contain the soil compound for the strip in Step 2 and place another test specimen in Step 3. Repeat Step 4. This abraded area is then placed over the opening of the colorimeter and the reflectance value obtained is recorded as original reflectance of the test specimen as described

16、in Step 8. This may be necessary for vinyl. 5. Measure the lightness difference reflectance value around the diameter of the unsoiled area of the test specimen. Take four successive readings on each piece. Average the readings and save as your standard reading. 6. Take four successive reflectance re

17、adings on the abraded, soiled, area at locations halfway between the center and the outside of the soiled area. Average the results of the two pieces of test specimen. and save as your tested sample reading. 7. Calculate and report the DE value obtained between steps 5 and 6 above. Report this DE value as your soiling transfer value. Chemicals, materials, parts, and equipment referenced in this document must be used and handled properly. Each party is responsible for determining proper use and handling in its facilities.