FORD ESW-M2P53-A-2008 PAINT QUALITY ROUGH CASTINGS TO BE USED WITH FORD WSS-M99P1111-A 《毛坯铸件用油漆的质量 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD ESW-M2P53-A-2008 PAINT QUALITY ROUGH CASTINGS TO BE USED WITH FORD WSS-M99P1111-A 《毛坯铸件用油漆的质量 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD ESW-M2P53-A-2008 PAINT QUALITY ROUGH CASTINGS TO BE USED WITH FORD WSS-M99P1111-A 《毛坯铸件用油漆的质量 与标准FORD WSS-M99P1111-A一起使用 》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver. 4 2008 09 10 N-STATUS No Replacement Named G. Weber, FNA 2003 08 12 Revised Para 3.0 inserted; Para 3.4 & 4 deleted 1964 03 20 Released CW10-RD438084 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, Inc. Page 1 o

2、f 1 PAINT QUALITY, ROUGH CASTINGS ESW-M2P53-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE This specification defines the quality and characteristics of a special finish required on specified castings. 2. APPLICATION This specification was released originally for a finish where protection from corrosion a

3、nd/or sealing properties (to prevent loosening of burned-in sand in service) are necessary. It is specified on rough castings prior to final painting where required. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys

4、Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 SYSTEM COMPONENTS . Good commercial cleaning . Air dry paint 0.0005 in (13 m) minimum thickness 3.2 MATERIAL Shall meet requirements of material specifications covering “M“ numbered materials specified in the applicable specificati

5、on or approved alternate, as referenced in para 3.3, and selected by the manufacturing source. 3.3 APPROVED PROCESS STANDARDS & SPECIFICATIONS Process Castings Standard Paint Specification Color As Required C-842-A M-304-A or Black M-99J52-A Black C-842-B ESN-M99J244-A or Red ESN-M99J43-A Red M-304 C Brown M-304-D Gray C-867 (E) ESW-M62J3-A Red