ETSI TS 143 045-2016 Digital cellular telecommunications system (Phase 2+) Technical realization of facsimile group 3 transparent (V13 0 0 3GPP TS 43 045 version 13 0 0 Release 13).pdf

《ETSI TS 143 045-2016 Digital cellular telecommunications system (Phase 2+) Technical realization of facsimile group 3 transparent (V13 0 0 3GPP TS 43 045 version 13 0 0 Release 13).pdf》由会员分享，可在线阅读，更多相关《ETSI TS 143 045-2016 Digital cellular telecommunications system (Phase 2+) Technical realization of facsimile group 3 transparent (V13 0 0 3GPP TS 43 045 version 13 0 0 Release 13).pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Digital cellular telecoTechnical realizatio(3GPP TS 43.0TECHNICAL SPECIFICATION143 045 V13.0.0 (2016communications system (Phation of facsimile group 3 trans.045 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); nsparent 13) TEM FOR ICATIONSRETSI ETSI TS 143 045 V13.0.0 (2

2、016-01)13GPP TS 43.045 version 13.0.0 Release 13Reference RTS/TSGC-0343045vd00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfectu

3、re de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be mo

4、dified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

5、 Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your

6、comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETS

7、I. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo

8、are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 143 045 V13.0.0

9、(2016-01)23GPP TS 43.045 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can b

10、e found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI I

11、PR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword Th

12、is Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the correspond

13、ing ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ a

14、re to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 143 045 V13.0.0 (2016-01)33GPP TS 43.045 version 13.0.0 Release 13C

15、ontents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g30 Scope 6g30.1 References 6g30.2 Definitions and abbreviations . 7g31 Service definition . 8g32 Network architecture 8g33 Reference configuration at the mobile station 9g33.1 Fax Adaptor functionality 9g33

16、.2 PLMN Facsimile Machine functionality 10g34 Connection types 10g34.1 Information transfer protocol model. 12g34.2 Interactions with T.30 . 13g34.2.1 Link control strategy . 13g34.2.1.1 Message detection . 14g34.2.2 Speed conversion for BCS phases 14g34.2.3 Compatibility checking . 15g34.2.3.1 Grou

17、p 1 and Group 2 support 15g34.2.3.2 2 400 bit/s handshaking . 15g34.2.3.3 Non-standard facilities 15g34.2.3.4 12 000 and 7200 bit/s Facsimile Document Transfer 15g34.2.3.5 Procedure interrupts 15g34.2.4 Speed checking . 15g34.3 Radio Channel Modification Procedures 16g34.3.1 In Call Modification (IC

18、M) 16g34.3.2 Channel Mode Modify (CMM) 17g35 Use of terminal adaptation functions 17g35.1 Standard TAFs for synchronous services . 18g35.2 Specific TAFs for facsimile service . 18g35.2.1 Working principle . 18g35.2.2 Basic protocol structure 19g35.2.2.1 Frame formats . 19g35.2.3 Protocol description

19、 20g35.2.3.1 IDLE state . 20g35.2.3.2 BCS-REC state 20g35.2.3.3 BCS-TRA state . 20g35.2.3.4 MSG-REC state . 20g35.2.3.5 MSG-TRA state 21g35.2.4 DCS and TCF processing . 21g35.2.5 DCN (disconnect) frame . 22g35.2.6 Clocking 22g35.2.7 Timeouts . 22g35.3 Specific TAFs for facsimile service (T.30/A) 22g

20、35.3.1 Frame detection 23g35.3.2 Message phase 23g35.3.3 Additional CMM request 23g36 Signalling aspects . 23g36.1 Handling of Tonal Signals 23g36.2 Call establishment 24g3ETSI ETSI TS 143 045 V13.0.0 (2016-01)43GPP TS 43.045 version 13.0.0 Release 136.2.1 Mobile Terminated Call - Speech then Fax 24

21、g36.2.2 Mobile Terminated Call - Auto answer 24g36.2.3 Mobile Originated Call - Speech then Fax 25g36.2.4 Mobile Originated Call - Auto calling 25g36.2.5 Mobile Originated Call - Manual calling 25g36.3 Call release . 26g37 Interworking to fixed networks 26g37.1 Interworking to PSTN 26g37.2 Interwork

22、ing to ISDN . 27g3Annex I (informative): Protocol entities from ITU-T T.30 and T.4 28g3Annex II (informative): Procedure examples . 29g3Annex III (informative): Change history . 42g3History 43g3ETSI ETSI TS 143 045 V13.0.0 (2016-01)53GPP TS 43.045 version 13.0.0 Release 13Foreword This Technical Spe

23、cification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG

24、 with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented

25、for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 143 045 V13.0.0 (2016-01)63GPP TS 43.045 version 13.0.0 Release 130 Scope The present document deals

26、 with the procedures allowing the technical realization of the Group 3 facsimile Service within the A/Gb mode PLMN using transparent Network support, according to the definition of Teleservice 61 and 62 specified in the 3GPP TS 22.003 2. 0.1 References The following documents contain provisions whic

27、h, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the l

28、atest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 Void. 2 3GPP TS 22.003: “ Teleservices supported by a GSM Public Land Mobi

29、le Network (PLMN)“. 3 3GPP TS 22.034: High Speed Circuit Switched Data (HSCSD) - Stage1. 4 3GPP TS 43.010: “ GSM Public Land Mobile Network (PLMN) connection types“. 5 3GPP TS 23.034: “ High Speed Circuit Switched Data (HSCSD) - Stage2. 6 3GPP TS 04.02: “ GSM Public Land Mobile Network (PLMN) access

30、 reference configuration“. 7 3GPP TS 04.08: “ Mobile radio interface layer 3 specification“. 8 3GPP TS 44.021: “ Rate adaption on the Mobile Station - Base Station System (MS - BSS) interface“. 9 3GPP TS 27.001: “ General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)“. 10 3GPP TS 2

31、7.003: “ Terminal Adaptation Functions (TAF) for services using synchronous bearer capabilities“. 11 3GPP TS 29.007: “ General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)“. 1

32、2 ITU-T Recommendation T.35: “Procedure for the allocation of ITU-T members codes“. 13 ITU-T Recommendation F.160 Fascicle II.5: “General operational provision for the international public facsimile“. 14 ITU-T Recommendation T.4 Fascicle VII.3: “Standardization of group 3 facsimile apparatus for doc

33、ument transmission“. 15 ITU-T Recommendation T.30 Fascicle VII.3: “Procedures for document facsimile transmission in the general switched telephone network“. 16 ITU-T Recommendation V.21 Fascicle VIII.l: “300 bits per second duplex modem standardized for use in the general switched telephone network

34、“. 17 ITU-T Recommendation V.24 Fascicle VIII.l: “List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE)“. ETSI ETSI TS 143 045 V13.0.0 (2016-01)73GPP TS 43.045 version 13.0.0 Release 1318 ITU-T Recommendation V.25bis Fascicle

35、VIII.l: “Automatic calling and/or answering equipment on the general switched telephone network (GSTN) using the 100-series interchange circuits“. 19 ITU-T Recommendation V.27ter Fascicle VIII.l: “4 800/2 400 bits per second modem standardized for use in the general switched telephone network“. 20 I

36、TU-T Recommendation V.29 Fascicle VIII.l: “9 600 bits per second modem standardized for use on point-to-point 4-wire leased telephone-type circuits“. 21 ITU-T Recommendation V.33 Fascicle VIII.l: “14 400 bits per second modem standardized for use on point-to-point 4-wire leased telephone-type circui

37、ts“. 22 ITU-T Recommendation X.300 Fascicle VIII.6: “General principles for interworking between public networks, and between public networks and other networks for the provision of data transmission services“. 23 ITU-T Recommendation V.17: “A 2-wire modem for facsimile applications with rates up to

38、 14 400 bit/s“. 24 3GPP TS 21.905: “ Vocabulary for 3GPP Specifications “ 0.2 Definitions and abbreviations In addition to those below, abbreviations used in the present document are listed in 3GPP TR 21.905 1. BCS Binary Coded Signalling phase of Facsimile transmission as per ITU-T T.30 CT105 Inter

39、change Circuit 105 as per ITU-T V.24 CT106 Interchange Circuit 106 as per ITU-T V.24 CT107 Interchange Circuit 107 as per ITU-T V.24 CT108.2 Interchange Circuit 108/2 as per ITU-T V.24 CT109 Interchange Circuit 109 as per ITU-T V.24 CT114 Interchange Circuit 114 as per ITU-T V.24 CT115 Interchange C

40、ircuit 115 as per ITU-T V.24 FA/MT The Fax Adaptor specifically located at MT side FA/IWF The Fax Adaptor specifically located at IWF side MSG Message phase of Facsimile transmission as per ITU-T T.30 All protocol entities from ITU-T Facsimile Recommendations (T.4 and T.30) apply; in the present doc

41、ument they are referenced to in the same way as in the above ITU-T Recommendations (see also annex I to the present document). ETSI ETSI TS 143 045 V13.0.0 (2016-01)83GPP TS 43.045 version 13.0.0 Release 131 Service definition The fixed network Group 3 Facsimile service, as basically defined in ITU-

42、T Recommendation F.160, is an international telematic service for ISO A4 document transmission between two facsimile stations. The service specification is comprised of two parts: the control protocol described in ITU-T Recommendation T.30, and the document transmission coding described in ITU-T Rec

43、ommendation T.4. The facsimile Teleservice is intended to allow facsimile connections between group 3 apparatus using: - a PLMN as a stand alone facility, for mobile to mobile communication; - a PLMN to gain access to fixed networks PSTN and ISDN, for mobile to/from land communication. For this Tele

44、service, the document coding is as ITU-T Recommendation T.4 with no modifications. The protocol used is ITU-T Recommendation T.30 modified within the PLMN as detailed in the present document. The interworking between different networks is based on ITU-T Recommendation X.300. The particular features

45、of this Teleservice are: - it uses point-point communication; - the information transfer capability is dual “Speech“/“Group 3 Facsimile“ for Teleservice 61 and “Group 3 Facsimile“ only for Teleservice 62; - both mobile originated and terminated calls are supported; - the information transfer mode is

46、 circuit, duplex, synchronous and symmetric; - different end-to-end transfer rates are used within the same call to take advantage of the better radio path error rate; - use of a standard synchronous terminal adaptation function (as per 3GPP TS 27.003) within the MS. 2 Network architecture The netwo

47、rk architecture applicable to this Teleservice is shown in figure 1/43.045, below. Figure 1/43.045: Network architecture This shows the case of mobile to fixed network interworking. For mobile to mobile calls, there would effectively be a loop back within the PLMN, using two IWFs. FAXBSS MSC/IWFPSTN

48、ISDNPLMNvMTvFAXETSI ETSI TS 143 045 V13.0.0 (2016-01)93GPP TS 43.045 version 13.0.0 Release 133 Reference configuration at the mobile station The mobile reference configurations described in this clause are defined as per 3GPP TS 24.002. Figure 2/43.045: Reference configurations The Teleservice defi

49、nition in 3GPP TS 22.003 regards the group 3 facsimile terminal as a 2-wire analogue terminated equipment. In order to connect this to the MT2 a separate “Fax Adaptor“ device is necessary. This configuration, shown in figure 2a/43.045, has to be considered as the standard configuration, so that all the existing Group 3 facsimile apparatus can be connected to the PLMN. An alternative realization would be to combine a standard group 3 facsimile machine and the Fax Adaptor into a specially developed “PLMN facsimile mac