ETSI TS 131 121-2018 Universal Mobile Telecommunications System (UMTS) LTE UICC-terminal interface Universal Subscriber Identity Module (USIM) application test specification (V14 4.pdf

《ETSI TS 131 121-2018 Universal Mobile Telecommunications System (UMTS) LTE UICC-terminal interface Universal Subscriber Identity Module (USIM) application test specification (V14 4.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 131 121-2018 Universal Mobile Telecommunications System (UMTS) LTE UICC-terminal interface Universal Subscriber Identity Module (USIM) application test specification (V14 4.pdf（404页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 131 121 V14.3.0 (2018-01) Universal Mobile Telecommunications System (UMTS); LTE; UICC-terminal interface; Universal Subscriber Identity Module (USIM) application test specification (3GPP TS 31.121 version 14.3.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 131 121 V14.3.0 (2018-01)13GP

2、P TS 31.121 version 14.3.0 Release 14Reference RTS/TSGC-0631121ve30 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de

3、Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified

4、 without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users

5、 of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send y

6、our comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of

7、 ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for t

8、he benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 1

9、31 121 V14.3.0 (2018-01)23GPP TS 31.121 version 14.3.0 Release 14Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI m

10、embers and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.e

11、tsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to

12、the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any tradem

13、ark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP)

14、. The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found

15、 under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the ex

16、pression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 131 121 V14.3.0 (2018-01)33GPP TS 31.121 version 14.3.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 20g3Int

17、roduction 20g31 Scope 21g32 References 21g33 Definitions, symbols, abbreviations and coding . 23g33.1 Definitions 23g33.2 Symbols 24g33.3 Abbreviations . 24g33.4 Coding Conventions . 26g33.5 Generic procedures for E-UTRAN/UTRAN/GERAN/IMSNB-IoT 26g33.6 Applicability . 27g33.6.1 Applicability of the p

18、resent document 27g33.6.2 Applicability to terminal equipment . 27g33.6.3 Applicability of the individual tests 27g33.7 Table of optional features . 28g33.8 Applicability table 32g34 Default Values 71g34.1 Definition of default values for USIM-Terminal interface testing (Default UICC) . 71g34.1.1 Va

19、lues of the EFs (Default UICC) . 71g34.1.1.1 EFIMSI(IMSI) 71g34.1.1.2 EFAD(Administrative Data) 71g34.1.1.3 EFLOCI(Location Information) 71g34.1.1.4 EFKeys(Ciphering and Integrity Keys) 72g34.1.1.5 EFKeysPS(Ciphering and Integrity Keys for Packet Switched domain) 72g34.1.1.6 EFACC(Access Control Cla

20、ss) . 72g34.1.1.7 EFFPLMN(Forbidden PLMNs) 72g34.1.1.8 EFUST(USIM Service Table) 72g34.1.1.9 EFEST(Enable Service Table) 73g34.1.1.10 EFADN(Abbreviated Dialling Number) . 73g34.1.1.11 EFPLMNwACT(User Controlled PLMN Selector with Access Technology) 73g34.1.1.12 EFOPLMNwACT(Operator Controlled PLMN S

21、elector with Access Technology) 74g34.1.1.13 Void. 74g34.1.1.14 PIN 74g34.1.1.15 PIN2 75g34.1.1.16 Unblock PIN . 75g34.1.1.17 Unblock PIN2 . 75g34.1.1.18 Other Values of the USIM 75g34.1.1.19 EFPSLOCI(Packet Switch Location Information) 75g34.1.1.20 Universal PIN 75g34.1.1.21 Unblock Universal PIN .

22、 76g34.2 Definition of FDN UICC 76g34.2.1 Values of the EFs (FDN UICC) . 76g34.2.1.1 EFUST(USIM Service Table) 76g34.2.1.2 EFEST(Enable Service Table) 76g34.2.1.3 EFFDN(Fixed Dialling Numbers) 76g34.2.1.4 EFECC(Emergency Call Codes) . 77g34.2.1.5 Other Values of the USIM 77g34.3 Void 78g34.4 Definit

23、ion of E-UTRAN/EPC UICC 78g34.4.1 EFUST(USIM Service Table) 78g3ETSI ETSI TS 131 121 V14.3.0 (2018-01)43GPP TS 31.121 version 14.3.0 Release 144.4.2 EFEPSLOCI(EPS Information) . 78g34.4.3 EFPLMNwACT(User Controlled PLMN Selector with Access Technology) 78g34.4.4 EFOPLMNwACT(Operator Controlled PLMN

24、Selector with Access Technology) 79g34.4.5 EFACSGL(Allowed CSG Lists) . 80g34.4.6 EFCSGT(CSG Type) . 80g34.4.7 EFHNBN(Home (e)NodeB Name) 82g34.4.8 EFEPSNSC(EPS NAS Security Context) . 83g34.5 Definition of E-UTRAN/EPC ISIM-UICC 84g34.5.1 Applications on the E-UTRAN/EPC ISIM-UICC 84g34.5.2 Default U

25、SIM values on E-UTRAN/EPC ISIM-UICC . 84g34.5.3 Default ISIM values on E-UTRAN/EPC ISIM-UICC 84g34.5.3.1 EFAD(Administrative Data) 84g34.5.3.2 EFIST(ISIM Service Table) . 84g34.5.3.3 EFIMPI(IMS private user identity) . 84g34.5.3.4 EFDOMAIN(Home Network Domain Name) . 85g34.5.3.5 EFIMPU(IMS public us

26、er identity) . 85g34.5.3.6 EFP-CSCF(P-CSCF ADDRESS) . 86g34.5.3.7 EFSMS(Short Message Service) . 86g34.5.3.8 EFSMSR(Short message status reports) 86g34.5.3.9 EFSMSP(Short message service parameters) 87g34.5.3.10 EFSMSS(SMS Status) . 87g34.5.4 Default values at DF_TELECOM . 87g34.5.4.1 EFPSISMSC(Publ

27、ic Service Identity of the SM-SC) 87g34.6 Definition of ACSGL/OCSGL E-UTRAN/EPC UICC 88g34.6.1 EFUST(USIM Service Table) 88g34.6.2 EFAD(Administrative Data) 88g34.6.3 EFOCSGL(Operator CSG Lists) 88g34.6.4 EFOCSGT(Operator CSG Type) 89g34.6.5 EFOHNBN(Operator Home (e)NodeB Name) . 90g34.7.1 Values of

28、 the EFs 92g34.7.1.1 EFUST(USIM Service Table) 92g34.7.1.2 EFNASCONFIG(Non Access Stratum Configuration) 92g35 Subscription related tests 99g35.1 IMSI / TMSI handling 99g35.1.1 UE identification by short IMSI . 99g35.1.1.1 Definition and applicability . 99g35.1.1.2 Conformance requirement. 99g35.1.1

29、.3 Test purpose 100g35.1.1.4 Method of test . 100g35.1.1.4.1 Initial conditions 100g35.1.1.4.2 Procedure . 100g35.1.1.5 Acceptance criteria 100g35.1.2 UE identification by short IMSI using a 2 digit MNC 100g35.1.2.1 Definition and applicability . 100g35.1.2.2 Conformance requirement. 101g35.1.2.3 Te

30、st purpose 101g35.1.2.4 Method of test . 101g35.1.2.4.1 Initial conditions 101g35.1.2.4.2 Procedure . 102g35.1.2.5 Acceptance criteria 102g35.1.3 UE identification by “short“ TMSI . 102g35.1.3.1 Definition and applicability . 102g35.1.3.2 Conformance requirement. 102g35.1.3.3 Test purpose 102g35.1.3

31、.4 Method of test . 103g35.1.3.4.1 Initial conditions 103g35.1.3.4.2 Procedure . 103g35.1.3.5 Acceptance criteria 103g35.1.4 UE identification by “long“ TMSI 104g35.1.4.1 Definition and applicability . 104g35.1.4.2 Conformance requirement. 104g3ETSI ETSI TS 131 121 V14.3.0 (2018-01)53GPP TS 31.121 v

32、ersion 14.3.0 Release 145.1.4.3 Test purpose 104g35.1.4.4 Method of test . 104g35.1.4.4.1 Initial conditions 104g35.1.4.4.2 Procedure . 105g35.1.4.5 Acceptance criteria 105g35.1.5 UE identification by long IMSI, TMSI updating and key set identifier assignment . 105g35.1.5.1 Definition and applicabil

33、ity . 105g35.1.5.2 Conformance requirement. 106g35.1.5.3 Test purpose 106g35.1.5.4 Method of test . 106g35.1.5.4.1 Initial conditions 106g35.1.5.4.2 Procedure . 107g35.1.5.5 Acceptance criteria 108g35.1.6 UE identification by short IMSI when accessing E-UTRAN/EPC . 108g35.1.6.1 Definition and applic

34、ability . 108g35.1.6.2 Conformance requirement . 108g35.1.6.3 Test purpose 109g35.1.6.4 Method of test . 109g35.1.6.4.1 Initial conditions 109g35.1.6.4.2 Procedure . 109g35.1.6.5 Acceptance criteria 109g35.1.7 UE identification by short IMSI using a 2 digit MNC when accessing E-UTRAN/EPC . 110g35.1.

35、7.1 Definition and applicability . 110g35.1.7.2 Conformance requirement . 110g35.1.7.3 Test purpose 110g35.1.7.4 Method of test . 110g35.1.7.4.1 Initial conditions 110g35.1.7.4.2 Procedure . 111g35.1.7.5 Acceptance criteria 111g35.1.8 UE identification after changed IMSI with service “EMM Informatio

36、n“ not available . 111g35.1.8.2 Conformance requirement . 111g35.1.8.3 Test purpose 112g35.1.8.4 Method of test . 112g35.1.8.4.1 Initial conditions 112g35.1.8.4.2 Procedure . 112g35.1.8.5 Acceptance criteria 112g35.1.9 UE identification by GUTI when using USIM with service “EMM Information“ not avai

37、lable 113g35.1.9.2 Conformance requirement . 113g35.1.9.3 Test purpose 113g35.1.9.4 Method of test . 113g35.1.9.4.1 Initial conditions 113g35.1.9.4.2 Procedure . 113g35.1.9.5 Acceptance criteria 114g35.1.10 UE identification by GUTI when using USIM with service “EMM Information“ available 114g35.1.1

38、0.1 Definition and applicability . 114g35.1.10.2 Conformance requirement . 114g35.1.10.3 Test purpose 115g35.1.10.4 Method of test . 115g35.1.10.4.1 Initial conditions 115g35.1.10.4.2 Procedure . 115g35.1.10.5 Acceptance criteria 115g35.2 Access Control handling 116g35.2.1 Access Control information

39、 handling . 116g35.2.1.1 Definition and applicability . 116g35.2.1.2 Conformance requirement. 116g35.2.1.3 Test purpose 117g35.2.1.4 Method of test . 117g35.2.1.4.1 Initial conditions 117g35.2.1.4.2 Coding details 117g35.2.1.4.3 Procedure . 118g35.2.1.5 Acceptance criteria 118g35.2.2 Access Control

40、information handling for E-UTRAN/EPC . 130g3ETSI ETSI TS 131 121 V14.3.0 (2018-01)63GPP TS 31.121 version 14.3.0 Release 145.2.2.1 Definition and applicability . 130g35.2.2.2 Conformance requirement. 130g35.2.2.3 Test purpose 130g35.2.2.4 Method of test . 130g35.2.2.4.1 Initial conditions 130g35.2.2

41、.4.2 Coding details 131g35.2.2.4.3 Procedure . 131g35.2.2.5 Acceptance criteria 131g36 Security related Tests . 155g36.1 PIN handling 155g36.1.1 Entry of PIN 155g36.1.1.1 Definition and applicability . 155g36.1.1.2 Conformance requirement. 155g36.1.1.3 Test purpose 156g36.1.1.4 Method of test . 156g

42、36.1.1.4.1 Initial conditions 156g36.1.1.4.2 Procedure . 156g36.1.1.5 Acceptance criteria 156g36.1.2 Change of PIN 156g36.1.2.1 Definition and applicability . 156g36.1.2.2 Conformance requirement. 156g36.1.2.3 Test purpose 156g36.1.2.4 Method of test . 156g36.1.2.4.1 Initial conditions 156g36.1.2.4.

43、2 Procedure . 157g36.1.2.5 Acceptance criteria 157g36.1.3 Unblock PIN . 157g36.1.3.1 Definition and applicability . 157g36.1.3.2 Conformance requirement. 157g36.1.3.3 Test purpose 157g36.1.3.4 Method of test . 157g36.1.3.4.1 Initial conditions 157g36.1.3.4.2 Procedure . 157g36.1.3.5 Acceptance crite

44、ria 158g36.1.4 Entry of PIN2 158g36.1.4.1 Definition and applicability . 158g36.1.4.2 Conformance requirement. 159g36.1.4.3 Test purpose 159g36.1.4.4 Method of test . 159g36.1.4.4.1 Initial conditions 159g36.1.4.4.2 Procedure . 159g36.1.4.5 Acceptance criteria 159g36.1.5 Change of PIN2 159g36.1.5.1

45、Definition and applicability . 159g36.1.5.2 Conformance requirement. 159g36.1.5.3 Test purpose 160g36.1.5.4 Method of test . 160g36.1.5.4.1 Initial conditions 160g36.1.5.4.2 Procedure . 160g36.1.5.5 Acceptance criteria 160g36.1.6 Unblock PIN2 . 160g36.1.6.1 Definition and applicability . 160g36.1.6.

46、2 Conformance requirement. 160g36.1.6.3 Test purpose 161g36.1.6.4 Method of test . 161g36.1.6.4.1 Initial conditions 161g36.1.6.4.2 Procedure . 161g36.1.6.5 Acceptance criterias 162g36.1.7 Replacement of PIN 162g36.1.7.1 Definition and applicability . 162g36.1.7.2 Conformance requirement. 162g3ETSI

47、ETSI TS 131 121 V14.3.0 (2018-01)73GPP TS 31.121 version 14.3.0 Release 146.1.7.3 Test purpose 162g36.1.7.4 Method of test . 162g36.1.7.4.1 Initial conditions 162g36.1.7.4.2 Procedure . 162g36.1.7.5 Acceptance criteria 163g36.1.8 Change of Universal PIN 163g36.1.8.1 Definition and applicability . 16

48、3g36.1.8.2 Conformance requirement. 163g36.1.8.3 Test purpose 163g36.1.8.4 Method of test . 164g36.1.8.4.1 Initial conditions 164g36.1.8.4.2 Procedure . 164g36.1.8.5 Acceptance criteria 164g36.1.9 Unblock Universal PIN . 164g36.1.9.1 Definition and applicability . 164g36.1.9.2 Conformance requiremen

49、t. 164g36.1.9.3 Test purpose 164g36.1.9.4 Method of test . 164g36.1.9.4.1 Initial conditions 164g36.1.9.4.2 Procedure . 165g36.1.9.5 Acceptance criteria 165g36.1.10 Entry of PIN on multi-verification capable UICCs . 165g36.1.10.1 Definition and applicability . 165g36.1.10.2 Conformance requirement. 165g36.1.10.3 Test purpose 165g36.1.10.4 Method of test . 166g36.1.10.4.1 Initial conditions 166g36.1.10.4.2 Procedure . 166g36.1.10.5 Acceptance criteria 166g36.1.11 Change of PIN on multi-verification capable UICCs . 167g36.1.11.1 Definition and applicability . 167g36.1.11.2 Co