ETSI TS 129 168-2017 Universal Mobile Telecommunications System (UMTS) LTE Cell Broadcast Centre interfaces with the Evolved Packet Core Stage 3 (V14 1 0 3GPP TS 29 168 version 14 .pdf

《ETSI TS 129 168-2017 Universal Mobile Telecommunications System (UMTS) LTE Cell Broadcast Centre interfaces with the Evolved Packet Core Stage 3 (V14 1 0 3GPP TS 29 168 version 14 .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 129 168-2017 Universal Mobile Telecommunications System (UMTS) LTE Cell Broadcast Centre interfaces with the Evolved Packet Core Stage 3 (V14 1 0 3GPP TS 29 168 version 14 .pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 129 168 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; Cell Broadcast Centre interfaces with the Evolved Packet Core; Stage 3 (3GPP TS 29.168 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 129 168 V14.0.0 (2017-04)13GPP TS 29.168 version 14.0.0 Re

2、lease 14Reference RTS/TSGC-0429168ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Importa

3、nt notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written au

4、thorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document shou

5、ld be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the fol

6、lowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF

7、 version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI r

8、egistered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 129 168 V14.0.0 (2017-04)23GPP TS 29.168

9、version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 31

10、4: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigati

11、on, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specificatio

12、n (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. Th

13、e cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as d

14、escribed in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 129 168 V14.0.0 (2017-04)33GPP TS 29.168 version 14.0.0 Release 14Contents Intellectual Prop

15、erty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 SBc description 8g34.1 Transport 8g34.1.1 General 8g34.1.2 Network layer . 8g34.1.3 Transport layer 8g34.1.4 Services expe

16、cted from signalling transport . 8g34.2. SBc-AP functions . 8g34.2.1 Function of SBc-AP 8g34.3 SBc-AP procedure 9g34.3.1 General 9g34.3.2 List of SBc-AP elementary procedure 9g34.3.3 Write Replace Warning Procedure 9g34.3.3.1 General 9g34.3.3.2 Successful Operation . 10g34.3.3.3 Unsuccessful Operati

17、on . 10g34.3.3A Stop Warning Procedure . 11g34.3.3A.1 General 11g34.3.3A.2 Successful Operation . 11g34.3.3A.3 Unsuccessful Operation 11g34.3.3B Error Indication . 12g34.3.3B.1 General 12g34.3.3B.2 Successful Operation . 12g34.3.3B.3 Abnormal Conditions 12g34.3.3C Write Replace Warning Indication .

18、12g34.3.3C.1 General 12g34.3.3C.2 Successful Operation . 13g34.3.3C.3 Abnormal Conditions 13g34.3.3D Stop Warning Indication . 13g34.3.3D.1 General 13g34.3.3D.2 Successful Operation . 13g34.3.3D.3 Abnormal Conditions 13g34.3.3E PWS Restart Indication . 13g34.3.3E.1 General 13g34.3.3E.2 Successful Op

19、eration . 14g34.3.3E.3 Abnormal Conditions 14g34.3.3F PWS Failure Indication . 14g34.3.3F.1 General 14g34.3.3F.2 Successful Operation . 15g34.3.3F.3 Abnormal Conditions 15g34.3.4 Message functional definition and content 15g34.3.4.1 Message contents 15g34.3.4.1.1 Presence . 15g34.3.4.1.2 Criticality

20、 . 15g34.3.4.1.3 Range . 16g34.3.4.1.4 Assigned Criticality . 16g3ETSI ETSI TS 129 168 V14.0.0 (2017-04)43GPP TS 29.168 version 14.0.0 Release 144.3.4.2 Warning Message Transmission Messages . 16g34.3.4.2.1 WRITE-REPLACE WARNING REQUEST 16g34.3.4.2.2 WRITE-REPLACE WARNING RESPONSE 17g34.3.4.2.3 STOP

21、 WARNING REQUEST 17g34.3.4.2.4 STOP WARNING RESPONSE 17g34.3.4.2.5 WRITE REPLACE WARNING INDICATION . 18g34.3.4.2.6 STOP WARNING INDICATION . 18g34.3.4.2.7 PWS RESTART INDICATION 19g34.3.4.2.8 PWS FAILURE INDICATION . 19g34.3.4.2A Management Messages . 20g34.3.4.2A.1 ERROR INDICATION . 20g34.3.4.3 I

22、nformation element definition 20g34.3.4.3.1 Message Type 20g34.3.4.3.2 Cause . 20g34.3.4.3.3 Criticality Diagnostics . 21g34.3.4.3.4 OMC ID. 22g34.3.4.3.5 Send Write-Replace-Warning-Indication 22g34.3.4.3.6 Unknown Tracking Area List 23g34.3.4.3.7 Send Stop Warning Indication . 23g34.3.4.3.8 Stop-Al

23、l Indicator 23g34.3.4.3.9 Broadcast Empty Area List 23g34.4 Message and information element abstract syntax . 24g34.4.1 General 24g34.4.2 Usage of protocol extension mechanism for non-standard use . 24g34.4.3 Elementary procedure definitions . 24g34.4.4 PDU definitions 26g34.4.5 Information element

24、definitions 31g34.4.6 Common definitions . 37g34.4.7 Constant definitions 37g34.4.8 Container Definitions 39g34.4.9 Message transfer syntax . 41g34.5 Handling of unknown, unforeseen or erroneous protocol data . 41g34.5.1 General . 41g34.5.2 Transfer Syntax Error . 41g34.5.3 Abstract Syntax Error . 4

25、1g34.5.3.1 General 41g34.5.3.2 Criticality information 42g34.5.3.3 Presence information 42g34.5.3.4 Not comprehended IE/IE group 43g34.5.3.4.1 Procedure code 43g34.5.3.4.2 Type of Message . 43g34.5.3.4.3 IEs other than the Procedure Code and Type of Message . 43g34.5.3.5 Missing IE or IE group . 44g

26、34.5.3.6 IEs or IE groups received in wrong order or with too many occurrences or erroneously present 45g34.5.4 Logical Error 46g34.5.5 Exceptions 46g3Annex A (informative): Change history: 47g3History 49g3ETSI ETSI TS 129 168 V14.0.0 (2017-04)53GPP TS 29.168 version 14.0.0 Release 14Foreword This T

27、echnical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-release

28、d by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is

29、incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 129 168 V14.0.0 (2017-04)63GPP TS 29.168 version 14.0.0 Release 141 Scope The present do

30、cument specifies the procedures and the SBc Application Part (SBc-AP) messages used on the SBc-AP interface between the Mobility Management Entity (MME) and the Cell Broadcast Centre (CBC). The present document supports the following functions. - Warning Message Transmission function in the EPS. 2 R

31、eferences The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequen

32、t revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.

33、905: “Vocabulary for 3GPP Specifications“. 2 IETF RFC 2460 (December 1998): “Internet Protocol, Version 6 (IPv6) Specification“. 3 IETF RFC 791 (September 1981): “Internet Protocol“. 4 IETF RFC 4960 (September 2007): “Stream Control Transmission Protocol“. 5 Void 6 Void 7 3GPP TS 36.413: “Evolved Un

34、iversal Terrestrial Radio Access Network (E-UTRAN); S1 Application Protocol (S1AP)“ 8 ITU-T Recommendation X.680 (07/2002): “Information Technology - Abstract Syntax Notation One (ASN.1): Specification of basic notation“. 9 ITU-T Recommendation X.681 (07/2002): “Information Technology - Abstract Syn

35、tax Notation One (ASN.1): Information object specification“. 10 ITU-T Recommendation X.691 (07/2002): “Information Technology - ASN.1 encoding rules - Specification of Packed Encoding Rules (PER)“. 11 3GPP TS 29.002: “Mobile Application Part (MAP) specification“. 12 Void 13 3GPP TS 22.268: “Public W

36、arning System (PWS) requirements“. 14 3GPP TS 23.041: “Technical realization of Cell Broadcast Service (CBS)“. 15 Void 16 3GPP TS 23.007: “Restoration procedures“. ETSI ETSI TS 129 168 V14.0.0 (2017-04)73GPP TS 29.168 version 14.0.0 Release 143 Definitions and abbreviations 3.1 Definitions For the p

37、urposes of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. Elementary Procedure: SBc-AP consists of Elementary Procedures (EPs

38、). An Elementary Procedure is a unit of interaction between MME and CBC. These Elementary Procedures are defined separately and are intended to be used to build up complete sequences in a flexible manner. If the independence between some EPs is restricted, it is described under the relevant EP descr

39、iption. Unless otherwise stated by the restrictions, the EPs may be invoked independently of each other as stand alone procedures, which can be active in parallel. Examples on using several SBc-APs together with each other and EPs from other interfaces can be found in reference FFS. An EP consists o

40、f an initiating message and possibly a response message. Two kinds of EPs are used: - Class 1: Elementary Procedures with response (success and/or failure). - Class 2: Elementary Procedures without response. For Class 1 EPs, the types of responses can be as follows: Successful: - A signalling messag

41、e explicitly indicates that the elementary procedure successfully completed with the receipt of the response. Unsuccessful: - A signalling message explicitly indicates that the EP failed. - On time supervision expiry (i.e. absence of expected response). Successful and Unsuccessful: - One signalling

42、message reports both successful and unsuccessful outcome for the different included requests. The response message used is the one defined for successful outcome. Class 2 EPs are considered always successful. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in 3GPP

43、 TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. CMAS Commercial Mobile Alert System CBC Cell Broadcast Center CBS Cell Broadcast Service EPC Evolved Packet Core EPS Evolv

44、ed Packet System ETWS Earthquake and Tsunami Warning System MME Mobility Management Entity PWS Public Warning System SCTP Stream Control Transmission Protocol ETSI ETSI TS 129 168 V14.0.0 (2017-04)83GPP TS 29.168 version 14.0.0 Release 144 SBc description 4.1 Transport 4.1.1 General This subclause s

45、pecifies the standards for signalling transport to be used across SBc-AP interface. SBc-AP interface is a logical interface between the MME and the CBC. All the SBc-AP messages described in the present document require an SCTP association between the MME and the CBC. 4.1.2 Network layer The MME and

46、the CBC shall support IPv6 (see IETF RFC 2460 2) and/or IPv4 (see IETF RFC 791 3). The IP layer of SBc-AP only supports point-to-point transmission for delivering SBc-AP messages. 4.1.3 Transport layer SCTP (see IETF RFC 4960 4) shall be supported as the transport layer of SBc-AP messages. Semi-perm

47、anent SCTP associations shall be established between MME and CBC, i.e. the SCTP associations shall remain up under normal circumstances. Local multi-homing should be supported. Remote multi-homing shall be supported. Multiple local SCTP endpoints may be supported. Multiple remote SCTP endpoints shal

48、l be supported. When multiple local or remote SCTP endpoints are configured, several simultaneous SCTP associations shall be supported between MME and CBC. Checksum calculation for SCTP shall be supported as specified in RFC 4960 4. The CBC shall establish the SCTP association. The registered port n

49、umber for SBc-AP is 29168. The registered payload protocol identifier for SBc-AP is 24. 4.1.4 Services expected from signalling transport The signalling connection shall provide in-sequence delivery of SBc-AP messages. SBc-AP shall be notified if the signalling connection breaks. 4.2. SBc-AP functions 4.2.1 Function of SBc-AP SBc-AP has the following function: - Warning Message Transmission function: This functionality provides the means to start, overwrite and stop the broadcasting of warning message in support of the Public