ETSI TS 102 362-1-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM) Conformance testing for the Digital Mobile Radio (DMR) Part 1 Protocol Implementation Conforma_1.pdf

《ETSI TS 102 362-1-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM) Conformance testing for the Digital Mobile Radio (DMR) Part 1 Protocol Implementation Conforma_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 362-1-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM) Conformance testing for the Digital Mobile Radio (DMR) Part 1 Protocol Implementation Conforma_1.pdf（61页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 362-1 V1.3.1 (2007-06)Technical Specification Electromagnetic compatibilityand Radio spectrum Matters (ERM);Conformance testing for the Digital Mobile Radio (DMR);Part 1: Protocol Implementation ConformanceStatement (PICS) proformaETSI ETSI TS 102 362-1 V1.3.1 (2007-06) 2 Reference RTS/

2、ERM-TGDMR-063-1 Keywords digital, PICS, PMR, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important not

3、ice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portabl

4、e Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information o

5、n the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may b

6、e reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2007. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of it

7、s Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 362-1 V1.3.1 (2007-06) 3 Contents Intellectual

8、Property Rights5 Foreword.5 Introduction 5 1 Scope 6 2 References 6 3 Definitions and abbreviations.7 3.1 Definitions7 3.2 Abbreviations .7 4 Conformance to this PICS proforma specification.8 Annex A (normative): Protocol ICS proforma for TS 102 361-1, TS 102 361-2, TS 102 361-3, and TS 102 361-49 A

9、.1 Guidance for completing the PICS proforma.9 A.1.1 Purposes and structure9 A.1.2 Abbreviations and conventions 10 A.1.3 Instructions for completing the PICS proforma12 A.2 Identification of the implementation 12 A.2.1 Date of the statement12 A.2.2 Implementation Under Test (IUT) identification .12

10、 A.2.3 System Under Test (SUT) identification12 A.2.4 Product supplier13 A.2.5 Client (if different from product supplier)13 A.2.6 ICS contact person14 A.3 Identification of the protocol14 A.4 Global statement of conformance.14 A.5 Release .15 A.6 Tier .15 A.7 Roles.16 A.8 Mobile Station16 A.8.1 MS

11、CCL .17 A.8.1.1 MS CCL capabilities and functionalities 17 A.8.1.1.1 MS CCL feature sets common to all Tiers17 A.8.1.1.2 MS CCL Tier 3 (trunked mode) feature sets.17 A.8.1.1.3 MS CCL standard feature set common to all Tiers .18 A.8.1.1.4 MS CCL group call service.18 A.8.1.1.5 MS CCL individual speec

12、h call service 19 A.8.1.1.6 MS CCL Data packet features.21 A.8.1.1.7 MS CCL trunked mode standard feature set .22 A.8.1.1.7.1 MS trunked mode control channel features .22 A.8.1.1.7.2 MS trunked mode payload channel features26 A.8.1.2 MS CCL PDUs .27 A.8.1.2.1 MS CCL repeater and direct mode PDUs .27

13、 A.8.1.2.2 MS trunked mode control channel PDUs28 A.8.1.2.3 MS trunked mode payload channel PDUs 29 A.8.1.3 MS CCL timers.30 A.8.2 MS DLL .32 A.8.2.1 MS DLL capabilities and functionalities 32 A.8.2.1.1 MS DLL channel types .32 ETSI ETSI TS 102 362-1 V1.3.1 (2007-06) 4 A.8.2.1.2 MS DLL channel timin

14、g .33 A.8.2.1.3 MS DLL channel access33 A.8.2.1.4 MS DLL channel burst format 34 A.8.2.1.5 MS DLL DMR signalling .35 A.8.2.1.6 MS DLL Packet data bearer service36 A.8.2.2 MS DLL PDUs .37 A.8.2.2.1 MS DLL PDU descriptions, seen from MS 38 A.8.2.2.2 MS DLL SYNC PDU patterns40 A.8.2.3 MS DLL timers.41

15、A.9 Base Station42 A.9.1 BS Repeater mode42 A.9.1.1 BS CCL repeater mode.43 A.9.1.1.1 BS CCL capabilities and functionalities .43 A.9.1.1.2 BS CCL common PDUs44 A.9.1.1.3 BS CCL timers 45 A.9.1.2 BS DLL repeater mode.45 A.9.1.2.1 BS DLL capabilities and functionalities .45 A.9.1.2.1.1 BS DLL channel

16、 timing.46 A.9.1.2.1.2 BS DLL channel operation mode 47 A.9.1.2.1.3 BS DLL channel access.47 A.9.1.2.1.4 BS DLL channel burst format .48 A.9.1.2.1.5 BS DLL DMR signalling.48 A.9.1.2.1.6 BS DLL packet data bearer service repeating .49 A.9.1.2.2 BS DLL PDUs 49 A.9.1.2.2.1 BS DLL PDU descriptions, seen

17、 from BS.50 A.9.1.2.2.2 BS DLL SYNC PDU patterns .52 A.9.1.2.3 BS DLL timers 52 A.9.2 BS Trunked System (TS) .53 A.9.2.1 BS TS Control Channel features.53 A.9.2.2 BS TS Payload Channel features 57 A.9.2.3 BS trunked mode PDUs58 A.9.2.3.1 BS trunked mode control channel PDUs.58 A.9.2.3.2 BS trunked m

18、ode payload channel PDUs .59 A.9.2.4 BS trunked mode DLL PDUs .60 History 61 ETSI ETSI TS 102 362-1 V1.3.1 (2007-06) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if a

19、ny, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available

20、on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server)

21、which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 1 of a multi-part deliverable covering the Ele

22、ctromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS) proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS)“.

23、 Introduction To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called a Protocol Implementation Conformance Statement (PICS). ETSI ETSI TS 102

24、 362-1 V1.3.1 (2007-06) 6 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Data Link Layer (DLL) and Call Control Layer (CCL) of Digital Mobile Radio (DMR) as defined in TS 102 361-1 1, TS 102 361-2 2, TS 102 361-3 3, and TS 102 361-4 4

25、in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 6 and ETS 300 406 7. The present document details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement. 2 Referen

26、ces The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisi

27、ons do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publi

28、cation ETSI cannot guarantee their long term validity. 1 ETSI TS 102 361-1 (V1.4.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 1: DMR Air Interface (AI) protocol“. 2 ETSI TS 102 361-2 (V.1.2.3): “ Electromagnetic compatibility and Radio

29、 spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 2: DMR voice and generic services and facilities“. 3 ETSI TS 102 361-3 (V.1.1.3): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 3: DMR data protocol“. 4 ETSI TS 102 361-4 (V.

30、1.2.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 4: DMR trunking protocol“. 5 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 6 ISO/IEC

31、 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 7 ETSI ETS 300 406 (1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standard

32、ization methodology“. ETSI ETSI TS 102 362-1 V1.3.1 (2007-06) 7 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS 102 361-1 1, TS 102 361-2 2, TS 102 361-3 3, TS 102 361-4 4, ISO/IEC 9646-1 5, ISO/IEC 9646-7 6 and the foll

33、owing apply: ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating whic

34、h capabilities have been implemented NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc. Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification 3.2 Abbreviations For the purposes of

35、 the present document, the following abbreviations apply: BOC Beginning Of Call BOT Beginning Of Transmission BS Base Station CCL Call Control Layer CSBK Control Signalling BlocK DLL Data Link Layer DMR Digital Mobile Radio EMB EMBedded signalling EOC End Of Call EOT End Of Transmission IUT Implemen

36、tation Under Test LC Link Control MS Mobile StationOACSU Off Air Call SetUp Ovcm Open Voice Channel Mode PATCS Press And Talk Call Setup PDU Protocol Data Unit P-HEAD Proprietary - HEADer PICS Protocol Implementation Conformance Statement PR FILL Pseudo Random FILL bit RC Reverse Channel Rx ReceiveS

37、LOT SLOT type SUT System Under Test SYNC SYNChronization TACT TDMA Access Channel Type TS Trunked SystemTSCC Trunked System Control Channel Tx TransmissionETSI ETSI TS 102 362-1 V1.3.1 (2007-06) 8 4 Conformance to this PICS proforma specification If it claims to conform to the present document, the

38、actual PICS proforma to be filled in by a supplier shall be technically equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming and ordering of the proforma items. A PICS, which conforms to the present document, shall be a conforming PICS proforma comple

39、ted in accordance with the guidance for completion given in clause A.1. ETSI ETSI TS 102 362-1 V1.3.1 (2007-06) 9 Annex A (normative): Protocol ICS proforma for TS 102 361-1, TS 102 361-2, TS 102 361-3, and TS 102 361-4 Notwithstanding the provisions of the copyright clause related to the text of th

40、e present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed PICS. A.1 Guidance for completing the PICS proforma A.1.1 Purposes and structure The purpose

41、of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in TS 102 361-1 1, TS 102 361-2 2, TS 102 361-3 3, and TS 102 361-4 4, may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into c

42、lauses for the following categories of information: guidance for completing the PICS proforma; identification of the implementation; identification of the TS 102 361-1 1, TS 102 361-2 2, TS 102 361-3 3, and TS 102 361-4 4; global statement of conformance; release and Tier; roles; Mobile Station MS:

43、- capabilities; - PDUs; - PDU parameters; - timers; Base Station BS: - capabilities; - PDUs; - PDU parameters; - timers. ETSI ETSI TS 102 362-1 V1.3.1 (2007-06) 10A.1.2 Abbreviations and conventions The PICS proforma contained in this annex comprises information in tabular form in accordance with th

44、e guidelines presented in ISO/IEC 9646-7 6. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the

45、implementation?“ Status column The following notations, defined in ISO/IEC 9646-7 6, are used for the status column: m mandatory - the capability is required to be supported; o optional - the capability may be supported or not; n/a not applicable - in the given context, it is impossible to use the c

46、apability; x prohibited (excluded) - there is a requirement not to use this capability in the given context; o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies an unique group of related optional items and the logic of their selection

47、 which is defined immediately following the table; ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying an unique conditional status expression which is defined immediately following t

48、he table; i irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is requested from the supplier; NOTE 1: This use of “i“ status is not to be confused with the suffix “i“ to the “o“ and “c“ statuses above. Reference column The reference column makes refer

49、ence to TS 102 361-1 1, TS 102 361-2 2, TS 102 361-3 3, or TS 102 361-4 4, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 6, are used for the support column: Y or y supported by the implementation; N or n not supported by the implementation; N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of