ETSI TR 123 977-2016 Universal Mobile Telecommunications System (UMTS) Bandwidth And Resource Savings (BARS) and speech enhancements for Circuit Switched (CS) networks (V13 0 0 3GP.pdf

《ETSI TR 123 977-2016 Universal Mobile Telecommunications System (UMTS) Bandwidth And Resource Savings (BARS) and speech enhancements for Circuit Switched (CS) networks (V13 0 0 3GP.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 123 977-2016 Universal Mobile Telecommunications System (UMTS) Bandwidth And Resource Savings (BARS) and speech enhancements for Circuit Switched (CS) networks (V13 0 0 3GP.pdf（55页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 1Universal Mobile TelBandwidth Anand speech enhanceme(3GPP TR 23.9TECHNICAL REPORT 123 977 V13.0.0 (2016elecommunications System (And Resource Savings (BARSments for Circuit Switched (CS.977 version 13.0.0 Release 1316-01) (UMTS); S) CS) networks 13) ETSI ETSI TR 123 977 V13.0.0 (2016-01)13

2、GPP TR 23.977 version 13.0.0 Release 13Reference RTR/TSGS-0223977vd00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Gr

3、asse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified w

4、ithout the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users o

5、f the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment

6、to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The c

7、ontent of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trad

8、e Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 123 977 V13.0.0 (2016-01

9、)23GPP TR 23.977 version 13.0.0 Release 13Contents Contents 2g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 6g33.3 Abbreviations . 6g34 Network deployment scenarios to be studied . 7g34.1 GSM network

10、architecture before Release 4 7g34.2 UMTS network architecture in Release 99 . 8g34.3 Packet transport network between MGWs in an A/Iu mode BICN 9g34.4 TDM transit network between A/Iu mode PLMNs 10g34.5 Packet transport transit network between PLMNs . 11g35 Call Scenarios to be studied . 13g35.1 Mo

11、bile to Mobile call Scenarios . 14g35.1.1 BSC to RNC call via BICN 14g35.1.2 BSC to BSC call via BICN . 15g35.1.3 RNC to BSC call via BICN 17g35.1.4 RNC to RNC call via BICN 18g35.2 Mobile to PSTN call scenarios . 20g35.2.1 BSC to PSTN call via BICN . 20g35.2.2 RNC to PSTN call via BICN 22g35.3 Roam

12、ing and multi-network call scenarios 23g35.3.1 BSC (HPLMN) to BSC (VPLMN) call 23g35.3.2 BSC (HPLMN) to RNC (VPLMN) call 23g35.3.3 RNC (HPLMN) to BSC (VPLMN) call 23g35.3.4 RNC (HPLMN) to RNC (VPLMN) call . 24g35.4 CS domain to IMS interworking scenario 24g35.5 A selection of handover scenarios 25g3

13、5.5.1 BSC to BSC call via BICN with Intra GERAN handover AMR-AMR 25g35.5.2 BSC to BSC call via BICN with Intra GERAN handover to AMR - EFR . 26g35.5.3 BSC to BSC call via BICN: second Handover to EFR AMR EFR . 28g35.5.4 BSC to BSC call via BICN: third handover to AMR EFR EFR . 28g35.5.5 RNC to RNC c

14、all via BICN with inter-system handover . 29g35.5.6 BSC to RNC call via BICN with second intersystem handover . 30g36 General requirements for architectural solutions . 30g36.1 Overall requirements 30g36.2 Status of specifications for TFO and TrFO in 3GPP 31g36.2.1 Support of codec types in TFO and

15、TrFO on various interfaces. 31g37 Requirements and architectural solutions for Resource Savings 31g37.1 AMR-NB configurations 32g37.2 AMR-WB configurations . 32g38 Requirements and architectural solutions for bandwidth savings 33g38.1 Background 33g38.2 Requirements 33g38.3 Architectural solutions .

16、 34g38.3.1 A-ter interface to the MGW 34g38.3.2 MGW collocated with TRAU . 35g3ETSI ETSI TR 123 977 V13.0.0 (2016-01)33GPP TR 23.977 version 13.0.0 Release 139 Requirements and architectural solutions for speech quality Improvements . 35g39.1 Requirements 35g39.2 Architectural solutions . 36g39.2.1

17、Mobile to mobile calls scenarios: 5.1.1 and 5.1.3 . 36g39.2.2 Mobile to PSTN calls: scenarios 5.2.x 36g39.3 Summary 36g310 Requirements and architectural solutions for avoiding duplication in transcoder development 36g310.1 Background and requirements 36g310.2 Architectural solutions . 37g310.2.1 A-

18、ter interface to the MGW 37g310.2.1.1 Description / concept. 37g310.2.1.2 Difficulties with this concept 37g310.2.1.3 Migration aspects 38g310.2.1.4 Sample message flow 40g311 Conclusions 42g3Annex A: Example for migrating a service to TrFO 43g3A.1 Service description . 43g3A.2 Realization 43g3A.2.1

19、 Overview 43g3A.2.2 High level description 43g3A.2.3 Message flow for a Release 99 network . 44g3A.2.4 Message flow with BICC and TrFO . 47g3A.2.5 Message flow with split architecture without TrFO . 49g3A.2.6 Message flow with split architecture and TrFO . 51g3A.3 Summary and conclusions 52g3Annex B

20、: Change history 53g3History 54g3ETSI ETSI TR 123 977 V13.0.0 (2016-01)43GPP TR 23.977 version 13.0.0 Release 13Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3

21、GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the presen

22、t document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables e

23、xcept when used in direct citation. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release dat

24、e and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technic

25、al enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TR 123 977 V13.0.0 (2016-01)53GPP TR 23.977 version 13.0.0 Release 131 Scope The objective of this technical report is to identify the full set o

26、f requirements for bandwidth and resource savings and improved speech quality, with specific consideration to networks supporting A/Gb mode and the bearer independent circuit-switched core network (BICN). The different architectural solutions to meet these requirements will be assessed. Consideratio

27、n shall be made to existing architectures and solutions to provide harmony between 2G nodes, UMTS nodes and external networks (PSTN/ISDN). Backward compatibility to existing solutions and ease of network introduction/upgrade shall be given high importance. 2 References The following documents contai

28、n provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-sp

29、ecific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 23.002: “Network architecture“. 2 3GPP TS 2

30、3.153: “Out of band transcoder control; Stage 2“. 3 3GPP TS 23.053: “Tandem Free Operation (TFO); Service description; Stage 2“. 4 3GPP TS 28.062: “Inband Tandem Free Operation (TFO) of speech codecs; Service description; Stage 3“. 5 3GPP TS 26.103: “Speech codec list for GSM and UMTS“. 6 3GPP TR 26

31、.975: “Performance Characterization of the AMR Speech Codec“. 7 3GPP TR 26.976: “Performance characterization of the Adaptive Multi-Rate Wideband (AMR-WB) speech codec“. 8 3GPP TS 26.102: “Mandatory speech codec; Adaptive Multi-Rate (AMR) speech codec; Interface to Iu, Uu and Nb“. 9 Void. 10 3GPP TS

32、 48.060: “In-band control of remote transcoders and rate adaptors for full rate traffic channels“. 11 3GPP TS 48.061: “In band control of remote transcoders and rate adaptors for half rate traffic channels“. 12 3GPP TS 52.021: “Network Management (NM) procedures and messages on the A-bis interface“.

33、 13 3GPP TS 29.163: “Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks“. 14 ITU-T Recommendation Q.1912.5: “BICC SIP Interworking“. 15 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. ETSI ETSI TR 123 977 V13.0.0 (2016-01)63GPP TR 23.977

34、version 13.0.0 Release 133 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the definitions in TR 21.905 15 apply as well as the following terms and definitions. Bearer Independent Core Network : This term refers to a core network (CN) comprised of MSC

35、 Server, CS-MGW and GMSC Server nodes to support MSC and GMSC functionality, as defined in TS 23.002 1. Codec Configuration : The Codec Configuration of a codes type ,like AMR, includes mainly the Active Codec Set, the setting of the OM flag and DTX parameters, etc. MIPS: Mega (Million) Instructions

36、 Per Second. This is a measure for the required DSP capacity. It is here in this context related to the “ETSI-DSP“ as defined in 3GPP SA4 for the complexity characterisation of the 3GPP Speech Codec algorithms. 3.2 Symbols For the purposes of the present document, the following symbols apply: Ater t

37、he reference point internal to the BSC functional entity, between the transcoders and the rest of the BSC functions. Abis interface between the BTS and the BSC 3.3 Abbreviations For the purposes of the present document, the abbreviations in TR 21.905 15 apply as well as the following abbreviations:

38、BICN Bearer Independent Core Network BICC Bearer Independent Call Control DSP Digital Signal Processor DC Decoding MSC-S MSC Server OoBTC Out of Band Transcoder Control PT TFO Protocol Termination R Reframing TC Transcoding UP User Plane Termination ETSI ETSI TR 123 977 V13.0.0 (2016-01)73GPP TR 23.

39、977 version 13.0.0 Release 134 Network deployment scenarios to be studied 4.1 GSM network architecture before Release 4 PSTN PSTN BSC A MSC B MSC A TRAU Trans- Coder A BSC B TRAU Trans- Coder B Ater AterISUP TDM A A PoI B PoI A Call Control Signalling A and TDM Interface: 64kb/s Ater Interface PoI:

40、Point of Interconnect A A ISUP ISUP TDM TDM Figure 4.1-1: GSM Network Architecture before release 4 In GSM networks according to releases before release 4 the MSCs are interconnected on the user plane by TDM links (real or virtual) with 64 kb/s for speech traffic. The only speech codec type known be

41、tween MSCs is G.711 PCM. There are typically several Points-of-Interconnect to the underlying PSTN, with 64kb/s for the speech traffic in PCM. The MSCs control and interconnect the BSCs via the A-Interface (user plane and control plane), but they have no direct influence on the Codec Type selected b

42、y the BSC on the GSM radio access. The MSC can make a suggestion on the Codec Type, but the BSC decides finally. The MSCs have no means at all to signal the Codec Configuration to the BSCs or between MSCs. This is a drawback. The transcoders belong logically to the GSM_BSS. Speech is transported on

43、the Ater interface in compressed form using the same codec type and configuration as on the radio interface. Tandem Free Operation (TFO) is defined on PCM links for all GSM Codec Types. TFO allows by inband signalling to tunnel the compressed speech through the TDM core network. TFO provides the pos

44、sibility to bypass and omit the encoding functions, saves DSP resources, improves the speech quality in mobile-mobile calls, allows new speech services like wideband speech, but does not provide transmission cost saving. ETSI ETSI TR 123 977 V13.0.0 (2016-01)83GPP TR 23.977 version 13.0.0 Release 13

45、4.2 UMTS network architecture in Release 99 PSTN PSTN RNC A MSC B MSC A Trans- Coder A RNC B Trans- Coder B Iu IuISUP TDM PoI B PoI A Call Control Signalling TDM Interface: 64kb/s Iu Interface PoI: Point of Interconnect Iu Iu ISUP ISUP TDM TDM Figure 4.2-1: UMTS network architecture in Release 99 In

46、 UMTS networks according to release 99 the MSCs are interconnected on the user plane by TDM links (real or virtual) with 64 kb/s for speech traffic. The only speech codec type known between MSCs is G.711 PCM. There are typically several Points-of-Interconnect to the underlying PSTN, with 64kb/s for

47、the speech traffic in PCM. The MSCs control and interconnect the RNCs via the Iu-Interface (user plane and control plane). The MSC selects and commands the Codec Type on the UTRAN radio access and makes a suggestion on the Codec Configuration, but the RNC can select a sub-configuration. The Transcod

48、ers are located on central places physically and logically inside the mobile core network as integral parts of the MSCs. They are controlled by the MSCs via internal interfaces. But also the RNC controls the transcoder via the Iu interface (Iu_Init). Speech is transported on the Iu-interface in comp

49、ressed form using the same codec type and configuration as on the radio interface. The MSCs have no means at all to signal the Codec Configuration between MSCs. This is a drawback. Tandem Free Operation (TFO) is defined on PCM links for all UMTS Codec Types (there is only UMTS_AMR and UMTS_AMR2). TFO allows by inband signalling to tunnel the compressed speech through the TDM core network. TFO provides the possibility to bypass and omit the encoding functions, saves DSP resources, improves the speech quality in mobile-mobile