ETSI TR 102 805-3-2010 User Group End-to-end QoS management at the Network Interfaces Part 3 QoS informational structure (V1 1 1)《用户组 网络接口处的端到端QoS管理 第3部分 QoS的信息结构(版本1 1 1)》.pdf

《ETSI TR 102 805-3-2010 User Group End-to-end QoS management at the Network Interfaces Part 3 QoS informational structure (V1 1 1)《用户组 网络接口处的端到端QoS管理 第3部分 QoS的信息结构(版本1 1 1)》.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 102 805-3-2010 User Group End-to-end QoS management at the Network Interfaces Part 3 QoS informational structure (V1 1 1)《用户组 网络接口处的端到端QoS管理 第3部分 QoS的信息结构(版本1 1 1)》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 102 805-3 V1.1.1 (2010-04)Technical Report User Group;End-to-end QoS management at the Network Interfaces;Part 3: QoS informational structure ETSI ETSI TR 102 805-3 V1.1.1 (2010-04)2Reference DTR/USER-00029-3 Keywords QoS, interface ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex

2、 - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document

3、 may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF

4、version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.

5、asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend t

6、o reproduction in all media. European Telecommunications Standards Institute 2010. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefi

7、t of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 102 805-3 V1.1.1 (20

8、10-04)3Contents Intellectual Property Rights 4g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 QoS and profiles . 7g34.1 QoS criteria related to visi

9、bility levels . 7g34.2 Resources profiles 9g34.3 Resource usage profiles 9g34.4 QoS values 11g35 User-centric profile. 11g35.1 Requirements of user-centric profile and relationship 11g35.1.1 Requirements of user-centric profile: . 11g35.1.2 Relationship 12g35.2 Information structure in User-centric

10、profile 12g35.2.1 Personal information sub-profile 13g35.2.2 Location sub-profile(s) . 13g35.2.3 Agenda sub-profile(s) . 14g35.2.4 Role sub-profile(s) 14g36 Conclusion 15g3Annex A: QoS of Service delivery (Following Annex A of TR 102 805-1 V1.1.1: Media delivery) . 16g3Annex B: Bibliography 19g3Hist

11、ory 20g3ETSI ETSI TR 102 805-3 V1.1.1 (2010-04)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be

12、found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant t

13、o the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document.

14、 Foreword This Technical Report (TR) has been produced by ETSI User Group (USER). The present document is part 3 of a multi-part deliverable covering the End-to-end QoS management at the Network Interfaces, as identified below: Part 1: “Users E2E QoS - Analysis of the NGN interfaces (user case)“; Pa

15、rt 2: “Control and management planes solution: QoS continuity“; Part 3: “QoS informational structure“. Introduction The network and service QoS management is a multidimensional problem. In the methodology described in parts 1 i.1 and 2 i.2, five dimensions were identified through the analysis carrie

16、d out: the information dimension which represents the entire system by the structured data; the organizational dimension which defines the management/control relationship between different entities; the functional dimension which defines a set of functions related to management/control activities, t

17、he architectural dimension which describes the structure of management entities and their related interfaces for information exchange, and the protocol dimension which defines the means for transmitting the management information. Among these five dimensions, the information dimension is the basic b

18、uilding block for the other dimensions of the End-to-End (E2E) QoS management and control. This structure of the information dimension provides a generic information image of the components in the users system and a description of any ambient resource applied to any architecture and system technolog

19、y for the QoS management. The present document focuses on the QoS informational structure. ETSI ETSI TR 102 805-3 V1.1.1 (2010-04)51 Scope The present document provides a description of QoS criteria related to the different visibility levels (Equipment, Network, Service) and related profiles involve

20、d in each step of the service lifecycle. A set of user preferences and an information structure are defined in the user-centric profile for personalisation purposes. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specifi

21、c. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the

22、referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarant

23、ee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amen

24、dments) applies. Not applicable. 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including

25、 any amendments) applies. i.1 ETSI TR 102 805-1: “User Group; End-to-end QoS management at the Network Interfaces; Part 1: Users E2E QoS - Analysis of the NGN interfaces (user case)“. i.2 Nomie Simoni, Simon Znaty (1997): “Gestion de rseau et de service: similitude des concepts, spcificit des soluti

26、ons“. i.3 ETSI ES 202 746: “Human Factors (HF); Personalization and User Profile Management; User Profile Preferences and Information“. i.4 IETF RFC 1633: “Integrated Services in the Internet Architecture: an Overview“. i.5 IETF RFC 2474: “Definition of the Differentiated Services Field (DS Field) i

27、n the IPv4 and IPv6 Headers“. i.6 IETF RFC 2475: “Architecture for Differentiated Services“. i.7 ETSI TR 102 805-2: “User Group; End-to-end QoS management at the Network Interfaces; Part 2: Control and management planes solution - QoS continuity“. ETSI ETSI TR 102 805-3 V1.1.1 (2010-04)63 Definition

28、s and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: AmbientGrid: information inference (AmbientGrid) based on the profiles matching, to structure with grid covering the needed user centric environment class of service: way of traff

29、ic management in the network by grouping similar types of traffic and treating them as its own level of service priority Diffserv: DiffServ networks classify packets into one of a small number of aggregated flows or classes, based on the DiffServ codepoint (DSCP) in the packets IP header NOTE: This

30、is known as behaviour aggregate (BA) classification (RFC 2475 i.6). At each DiffServ router, packets are subjected to a per-hop behaviour (PHB), which is invoked by the DSCP (RFC 2474 i.5). infosphere: decisional knowledge base managing, in the real time, all the personalization and ambient environm

31、ent information infoware: knowledge base that covers the different visibility levels and acts by inference IntServ: the integrated services architecture RFC 1633 i.4 defined a set of extensions to the traditional best effort model of the Internet with the goal of allowing end-to-end QoS to be provid

32、ed to applications NOTE: One of the key components of the architecture is a set of service; the current set of services consists of the controlled load and guaranteed services. The architecture assumes that some explicit setup mechanism is used to convey information to routers so that they can provi

33、de requested services to flows that require them. While RSVP is the most widely known example of such a setup mechanism, the IntServ architecture is designed to accommodate other mechanisms. QoS classification: definition of class priority for QoS by describing traffic condition or performance param

34、eters service mobility: ability to consistently provide services to the end-user, to maintain the expected QoS, at the systems initiative, regardless of the end-users location, terminals, or networks NOTE: To maintain the service continuity, the session mobility is used. terminal mobility: use of a

35、mobile device while moving across the same or different networks and having access to the same set of subscribed services user mobility: ability for a subscriber to move to different physical locations and be able to use one or more devices connected to one or more access networks to gain access to

36、their services without interruption user-centric session: period of communication between one end-user and another or other end-users or servers characterized by a starting time and a termination time, including setting up the relation of the end-user equipment, access network, core network and serv

37、ices invoked during this period userware: innovative user centric middleware (Userware) enhancing the seamless feasibility along with the location and activity, personalization and users ambient contexts 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: B

38、A Behaviour Aggregate CPU Central Processing Unit DiffServ Differentiated services (IETF) DSCP Differentiated Services CodePoint E2E End-to-End ETSI European Telecommunications Standards Institute ETSI ETSI TR 102 805-3 V1.1.1 (2010-04)7GGSN Gateway GPRS Service Node HSS Home Subscriber Server IETF

39、Internet Engineering Task Force IntServ Integrated Services (IETF) LM Local Machine MIPS Millions of Instructions Per Second MMS Multimedia Messaging Service NGN Next Generation Network NLN Node-Link-Network QoS Quality of Service RS Remote ServerSGSN Serving GPRS Support Node SLA Service Level Agre

40、ement SMS Short Message Service UMTS Universal Mobile Telecommunications Systems VPCN Virtual Private Connectivity Network VPEN Virtual Private Equipment Network VPSN Virtual Private Service Network 4 QoS and profiles In this clause, the instantiations of each visibility level (Equipment, Network an

41、d Service) are described according to the QoS criteria defined in i.1 (clause 4.1). The different QoS information involved in each step of the services lifecycle (Figure 1) are then presented: resource profile with QoS capability which is involved in the E2E conception phase (clause 4.2), resource u

42、sage profile which is involved in the deployment phase (clause 4.3) and finally the QoS values which are involved in the exploitation phase (clause 4.4). Figure 1: QoS and profiles 4.1 QoS criteria related to visibility levels The QoS of the four actors (Equipment, Network, Service and User) partici

43、pating in the E2E session determines the overall E2E sessions QoS (Figure 2). Each actor has responsibilities in the achieved QoS i.2. Figure 2: End-to-end QoS ETSI ETSI TR 102 805-3 V1.1.1 (2010-04)8In order to monitor the component behaviour in a heterogeneous environment, it is necessary that a h

44、omogeneous expression of its QoS be available to evaluate the E2E behaviour during the whole session. Therefore, a unified QoS model (four criteria: availability, delay, fidelity and capability) is applied to all components. These criteria can be applied to any QoS classification (Diffserv, Interser

45、v, etc) and can also be measured easily according to specific parameters: Availability represents the aptitude of a service, network or equipment element to be accessed at a certain moment. The availability depends on the demands and the contractual conditions of the environment and time. It indicat

46、es the accessibility rate of the nodes and the logical links which have also been defined in the Meta model. Fidelity represents the aptitude of a service, network or equipment element to work without deteriorating the treated information with respect to the demands and the contractual conditions. I

47、t indicates the involuntary modification rate of the information concerning the nodes and the links during their treatment. Delay represents the aptitude of a service, network or equipment element to comply with the specific times requested in the demands and the contractual conditions. It indicates

48、 the treatments duration of the nodes and the mean delay of the link transit. Capability represents the aptitude of a service, network or equipment element, which should have the necessary means to realize its task according to the demands and the contractual conditions. It indicates the maximum cha

49、rge of the nodes and the usable bandwidth of the links. The instantiations of the QoS model at each level are shown in the tables below. They demonstrate the feasibility of the measurement to evaluate the QoS in the performance assessment. For the equipment visibility level, QoS parameters depend on the characteristics of hardware hosting the different software. Table 1 shows the instantiation of the QoS criteria at equipment visibility level. Table 1: Instantiation of the QoS criteria at equipment level QoS Criteria