ETSI TR 101 994-1-2004 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Technical characteristics for SRD equipment using Ultra Wide Band te.pdf

《ETSI TR 101 994-1-2004 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Technical characteristics for SRD equipment using Ultra Wide Band te.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 101 994-1-2004 Electromagnetic compatibility and Radio spectrum Matters (ERM) Short Range Devices (SRD) Technical characteristics for SRD equipment using Ultra Wide Band te.pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 101 994-1 V1.1.1 (2004-01)Technical Report Electromagnetic compatibility andRadio spectrum Matters (ERM);Short Range Devices (SRD);Technical characteristics for SRD equipment using Ultra Wide Band technology (UWB) Part 1: Communications applicationsfloppy3 ETSI ETSI TR 101 994-1 V1.1.1 (200

2、4-01) 2 Reference DTR/ERM-RM-025-1 Keywords radio, short-range, SRD, UWB ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N

3、 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference

4、version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of

5、 status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written per

6、mission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade

7、 Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TR 101 994-1 V1.1.1 (2004-01) 3 Contents Intellectual Property Rights5 Foreword.5 Introduction 5 1 Sco

8、pe 6 2 References 6 3 Definitions and abbreviations.7 3.1 Definitions7 3.2 Abbreviations .7 4 Executive summary 8 4.1 Status of the present document.9 4.1.1 Comments from Vodafone group plc (supported by Nokia, Deutsche Telekom AG, Ericsson) 10 4.1.2 Further comments from Vodafone group plc10 4.1.2.

9、1 In-band power limits .10 4.1.2.2 Out-of-band power limits10 4.1.3 Comments from Nokia (supported by Deutsche Telekom AG)11 4.1.4 Comments from Siemens MC.11 4.1.5 Comments from ERM TG31A11 4.1.6 Comments from EP BRAN.12 4.1.7 Comments from INTEL CORPORATION SARL .12 4.2 Technical system descriptio

10、n .12 4.3 Market information.12 4.4 Impact on radio services inside and outside the proposed frequency band 12 5 Current regulations.13 6 Main conclusions13 7 Expected ECC actions13 Annex A: Detailed market information .14 A.1 Applications .14 A.2 Market size .15 A.2.1 Markets covered .15 A.2.2 Mark

11、et forecast.15 Annex B: Technical information 19 B.1 General UWB characteristics for communications 19 B.1.1 Current UWB devices design .19 B.1.1.1 FCC requirements.19 B.1.1.2 Work done in IEEE.20 B.1.2 UWB communications system principles and features 21 B.1.2.1 Single impulse approach.22 B.1.2.2 U

12、WB Multi-band OFDM pseudo-carrier approach 23 B.1.2.3 Typical utilization characteristics .25 B.1.3 UWB receiver characteristics .25 B.2 Limits for RF parameters .26 B.2.1 In-band .26 B.2.2 values outside the band 3,1 GHz to 10,6 GHz26 B.2.3 other considerations26 Annex C: Expected compatibility iss

13、ues 27 C.1 Coexistence studies required27 ETSI ETSI TR 101 994-1 V1.1.1 (2004-01) 4 C.1.1 Current allocations in the frequency band from 3,1 GHz to 10,6 GHz 27 C.1.2 Implication on radio services outside the proposed frequency band for UWB communication devices27 C.2 Current ITU-R allocations28 C.3

14、Sharing issues.28 C.4 Usage scenarios28 C.4.1 Introduction 28 C.4.2 Single interferer and aggregate interference.28 C.4.3 Traffic types .29 C.4.4 Device density and geographic distribution .30 C.4.4.1 Home (residential) population 30 C.4.4.2 Office population 31 C.4.4.3 Public space population 31 C.

15、5 Possible interference scenarios and parameters .32 C.5.1 Home A/V cluster co-existence scenario32 C.5.2 Office co-existence scenario.32 C.5.3 Public kiosk co-existence scenario.32 C.5.4 IEEE 802.19 co-existence scenarios.33 Annex D: Bibliography34 History 35 ETSI ETSI TR 101 994-1 V1.1.1 (2004-01)

16、 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Prope

17、rty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, incl

18、uding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been

19、 produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 1 of a multi-part deliverable covering short range devices as identified below: Part 1: “Communications applications“; Part 2: “Ground and Wall Probing Radar application

20、s“. Introduction Ultra-Wideband is a new emerging SRD technology with potential benefits for consumers and businesses, including security applications. UWB technology is undergoing rapid development for a variety of commercial and industrial applications on a global basis. The present document (Part

21、 1 of TR 101 994) covers UWB communication equipment which is expected to operate between 3,1 GHz and 10,6 GHz with a very high bandwidth and a very low radiated power density. The report includes necessary information to support the co-operation under the MoU between ETSI and the Electronic Communi

22、cations Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT) for amending the ERC Recommendation 70-03. The technical characteristics of short range Ground, Wall, and Through-wall Probing Radars using UWB- technology will be covered in part 2 of TR 101 994

23、. ETSI ETSI TR 101 994-1 V1.1.1 (2004-01) 6 1 Scope The present document provides information on the intended applications, the technical parameters and the radio spectrum requirements for UWB communication equipment in the frequency range from 3,1 GHz to 10,6 GHz. Additional information is given in

24、 the following Annexes: Annex A: Detailed market information; Annex B: Technical information; Annex C: Expected compatibility issues. 2 References For the purposes of the present document the following references apply: 1 CEPT/ERC Recommendation 70-03: “Relating to the use of Short Range Devices (SR

25、D)“. 2 ITU-R SG1 TG1-8 Report from the 1st meeting of ITU-R SG1 TG 1-8, Geneva 21 - 24 January 2003 (Document 1-8/047). 3 Intel Labs (J. Foerster, A. Stephens): “Response to the “Revision of UWB and FS co-existence report (Annex 5-1)“ concerning aggregate UWB interference into FS systems“. WGPT SE24

26、 Meeting 18 document M18-14R0. 4 ITU-R Recommendation M.1454: “E.i.r.p. density limit and operational restrictions for RLANs or other wireless access transmitters in order to ensure the protection of feeder links of non-geo-stationary systems in the mobile-satellite service in the frequency band 515

27、0-5250 MHz“. 5 Domenico Porcino and Walter Hirt: “Ultra-Wideband Radio Technology: Potential and Challenges Ahead“. IEEE Communications Magazine, July 2003, Vol. 41, No. 7, pp. 66-74. 6 IEEE P802.19/019r2, July 2003: Working document UWB. 7 FCC 02-48: “First Report and Order“, February 14, 2002. 8 “

28、Digital Communications“, Second Edition, John G. Proakis, McGraw-Hill 1989. 9 M.Pezzin, J.Keingart, N Daniele, S. de Rivas, B. Denis, D. Morche, P. Rouzet, R. Catenoz, N. Rinaldi, “Ultra Wideband: the radio link of the future?“, Annales des Tlcommunications, Mars/Avril 2003. 10 IEEE 802.15-03/267r5:

29、 “IEEE Standard for Telecommunications and Information Exchange Between Systems - LAN/MAN Specific Requirements - Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN)“. 11 IEEE 1394: “IEEE Standard for a High Pef

30、ormance Serial Bus“. 12 IEEE 802.15.3a “Amendment to Standard for Telecommunications and Information Exchange Between Systems - LAN/MAN Specific Requirements - Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Higher Speed Physical Layer Extension for the High

31、Rate Wireless Personal Area Networks (WPAN)“. 13 IEEE 802.15.4: “STANDARD FOR Telecommunications and Information Exchange Between Systems - LAN/MAN Specific Requirements - Part 15: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networ

32、ks (WPAN)“. ETSI ETSI TR 101 994-1 V1.1.1 (2004-01) 7 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: activity factor: actual on-the-air time divided by active session time or actual on-the-air emission time within

33、a given time window isochronous: isochronous transmission transmits asynchronous data over a synchronous data link necessary bandwidth: width of the frequency band which is just sufficient to ensure the transmission of information at the rate and with the quality required under specified conditions

34、NOTE: The definitions (such as Occupied bandwidth, Necessary Bandwidth, etc.) related to UWB are currently under study in CEPT and ITU-R Recommendation TG 1-8 2. Upon completion of this work ETSI will be in a position to update this definition if necessary. Therefore for the time being this definiti

35、on is not to be added to any ETSI definition database. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: AC3 type of audio application CDMA Code Division Multiple Access CE Consumer Electronics CEPT European Conference of Post and Telecommunications admin

36、istrations dB deciBel dBi deciBel relative to an isotropic radiator dBm deciBel relative to one milliwatt DS-CDMA Direct Sequence-CDMA DSSS Direct Sequence Spread Spectrum ECC Electronic Communications Committee eirp equivalent isotropically radiated power EMC ElectroMagnetic Compatibility ERC Europ

37、ean Radio communication Committee FCC Federal Communications Commission FDMA Frequency Division Multiple Access FFH Fast Frequency Hopping FHSS Frequency Hopping Spread Spectrum HDR High Data Rate IEEE Institute of Electrical and Electronics Engineers ITU-R International Telecommunications Union-Rad

38、io sector LDR Low Data Rate LOS Line-Of-SightOFDM Orthogonal Frequency Division Multiplex PHY PHYsical layer PPM Pulse Position Modulation PRF Pulse Repetition Frequency PSD Power Spectral Density QoS Quality of Service R consistent with data rates for individual components in table C.4.3/1. NOTE 3:

39、 Data rate limited by mobile phone connection. Due to the high bandwidth UWB is potentially able to transmit very high data rates. UWB systems offer, in contrast to many traditional narrow bandwidth RF systems, an excellent immunity to multi-path interference. Therefore, the requirement for a margin

40、 in the RF link budget is substantially less. Additionally, UWB receivers offer an excellent immunity to interference from other radio systems due to a very high spreading and processing gain. UWB technology is a technical platform for SRD applications for high bit rate communications. The UWB indus

41、try expects it to be implemented by relatively low cost integrated circuits. UWB communication devices have intentional emissions over a wide frequency range and are for widespread use. All the relevant activity factors as well as realistic deployment scenarios and their impact on total aggregation

42、effects should be considered when calculating the total aggregate interference. The proposed necessary bandwidth for communications will fall within the range 3,1 GHz to 10,6 GHz. Emissions outside this range can be attenuated via filters and pulse shaping techniques that are still evolving. The UWB

43、 industry within ETSI proposes in-band transmit power density limit which corresponds to the provisional policy 7 which the FCC has adopted. The aim of the present document is to ask CEPT-ECC to perform the relevant studies to determine whether the above in-band limit is appropriate to protect the o

44、ther radio services in the band and to propose a more adequate value if necessary. The present document does not propose any values outside this frequency band and asks CEPT-ECC to assess which mask (inside and outside the band) will be the most appropriate to ensure that all the radio services insi

45、de and outside the band are fully protected from UWB wanted and unwanted emissions. CEPT is therefore asked to propose an adequate mask and all other practical measures to ensure the protection of all other radio services in and outside the band 3,1 GHz to 10,6 GHz. 4.1 Status of the present documen

46、t Version 1.0.0 had been approved by ERM TG31A and submitted to ERM RM # 25 for approval. Version 1.1.1_1.0.5 was the result of the revision by ERM RM#25 (green text have been reviewed and agreed). That version was sent for a two-week consultation period within ETSI (first deadline 16thof September

47、2003, 16:00). Several comments from other ETSI members had been received and discussed at ERM TG31A#6. The version 1.1.1_1.0.6 is the result of the revision by ERM TG31A. In view of the strong disagreement of TG31A with many comments made during the consultation, version 1.1.1_1.1.1 was prepared by

48、WG ERM RM Secretary to try to consolidate a text acceptable for all parties. This text was offered for a further consultation until 17thof October 2003. Version 1.1.1_1.2.2 was prepared by WG ERM RM Secretary to be presented to TC ERM#21 on the 29thof October for approval for publication. ETSI ETSI

49、TR 101 994-1 V1.1.1 (2004-01) 10Version 1.1.1_1.2.3 was approved by TC ERM#21. The following comments were received during the two consultation phases from ETSI members but could not be incorporated in the other clauses of the present document: 4.1.1 Comments from Vodafone group plc (supported by Nokia, Deutsche Telekom AG, Ericsson) While UWB clearly offers the potential for new communications applications, it clearly also has the potential to cause interference to other radiocommunication services. The present document does not provide any