ETSI TR 101 984-2007 Satellite Earth Stations and Systems (SES) Broadband Satellite Multimedia (BSM) Services and architectures (V1 2 1)《卫星地面站和系统(SES) 宽带卫星多媒体 业务和框架(版本1 2 1)》.pdf

《ETSI TR 101 984-2007 Satellite Earth Stations and Systems (SES) Broadband Satellite Multimedia (BSM) Services and architectures (V1 2 1)《卫星地面站和系统(SES) 宽带卫星多媒体 业务和框架(版本1 2 1)》.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 101 984-2007 Satellite Earth Stations and Systems (SES) Broadband Satellite Multimedia (BSM) Services and architectures (V1 2 1)《卫星地面站和系统(SES) 宽带卫星多媒体 业务和框架(版本1 2 1)》.pdf（39页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 101 984 V1.2.1 (2007-12)Technical Report Satellite Earth Stations and Systems (SES);Broadband Satellite Multimedia (BSM);Services and architecturesETSI ETSI TR 101 984 V1.2.1 (2007-12) 2 Reference RTR/SES-00274 Keywords architecture, broadband, IP, multimedia, satellite ETSI 650 Route des L

2、ucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: h

3、ttp:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the

4、 printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at h

5、ttp:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright

6、and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2007. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being

7、registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TR 101 984 V1.2.1 (2007-12) 3 Contents Intellectual Property Rights5 Foreword.5 Introduction 5 1 Scope 6 2 References 6 2.1 I

8、nformative references6 3 Definitions and abbreviations.7 3.1 Definitions7 3.2 Abbreviations .9 4 Overview of BSM 10 4.1 Satellite network scenarios.10 4.2 IP networking scenarios .11 5 BSM roles, actors and equipment.12 5.1 General .12 5.2 Roles.12 5.2.1 Definitions 12 5.2.2 Relationships between ro

9、les13 5.3 Equipment 14 5.3.1 Definitions 14 5.3.2 Relationship between roles and equipment.14 5.4 Billing and usage relationships.15 6 BSM reference models and architectures.16 6.1 Definitions16 6.1.1 BSM System; Network and Subnetwork 16 6.1.2 Transparent and regenerative satellite architecture.17

10、6.1.3 Topologies 18 6.1.4 Link and channel attributes.18 6.2 BSM Network Types19 6.2.1 Naming conventions .19 6.2.2 Transparent Satellite Star (TSS) .20 6.2.3 Transparent Satellite Mesh (TSM)21 6.2.4 Regenerative Satellite Mesh (RSM) .22 6.3 Reference models .23 6.3.1 Reference models for access net

11、work scenario.23 6.3.1.1 U-plane reference model .23 6.3.1.2 C-plane and M-plane reference model 24 6.3.2 Generalized reference models.25 6.3.2.1 BSM network types.25 6.3.2.2 Other BSM scenarios 25 6.4 Protocol architecture.26 6.4.1 BSM protocol architecture26 6.4.2 SI-SAP and BSM families 27 6.4.3

12、Satellite Independent Service Access Point (SI-SAP) 27 6.4.4 BSM bearer services layered architecture.28 6.4.5 Air interface lower layer service elements29 7 General service definitions.31 7.1 Media components .31 7.2 BSM connections .31 7.3 BSM service capabilities 31 7.4 Interoperability.32 8 Bear

13、er services .32 ETSI ETSI TR 101 984 V1.2.1 (2007-12) 4 8.1 Definitions32 8.1.1 Telecommunications bearer services 32 8.1.2 Connectionless and connection-oriented bearer services33 8.1.3 Unidirectional and bidirectional bearer services.33 8.1.4 Bearer service symmetry 33 8.1.5 Bearer service configu

14、rations .33 8.2 BSM bearer services.34 8.2.1 General34 8.2.2 Queue Identifiers (QIDs) 34 Annex A: Example protocol models .35 A.1 A protocol model for regenerative satellites 35 A.2 A protocol model for transparent satellites 35 Annex B: Topology examples36 Annex C: Network interface examples.37 Ann

15、ex D: Bibliography38 History 39 ETSI ETSI TR 101 984 V1.2.1 (2007-12) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and

16、non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/I

17、PR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential

18、to the present document. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). Introduction The present document has been prepared by the TC-SES Broadband Satellite Multimedia (BSM) working group based on the recommendations fro

19、m the work of STF-126 1. ETSI ETSI TR 101 984 V1.2.1 (2007-12) 6 1 Scope The present document defines the BSM services and architectures. It contains a set of definitions and reference models in the following main areas: BSM roles and actors; BSM reference architectures and models; BSM bearer servic

20、es. The present document is intended to define the possible roles that Broadband Satellite Multimedia systems may have, to define the main actors, to define a set of reference architectures and to define the services they can provide. These definitions are intended as a common set of definitions for

21、 BSM standardization. The overall objectives of BSM standardization are: to enable users to access a wide range of telecommunications services, including many that are today undefined, with particular emphasis on IP-based multi-media services and high data rates; to provide an efficient means of usi

22、ng satellite network resources (particularly radio spectrum); to facilitate the provision of a high quality of service similar to that provided by fixed networks; to facilitate the provision of easy to use, low cost terminals. 2 References References are either specific (identified by date of public

23、ation and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all futur

24、e changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For online referenced documents, information su

25、fficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall inc

26、lude the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Info

27、rmative references 1 ETSI TR 101 374-2: “Satellite Earth Stations and Systems (SES); Broadband satellite multimedia; Part 2: Scenario for standardization“. 2 ETSI TS 122 101: “Universal Mobile Telecommunications System (UMTS); Service aspects; Service principles (3GPP TS 22.101 Release 7)“. ETSI ETS

28、I TR 101 984 V1.2.1 (2007-12) 7 3 MFA Forum: “Technology: ATM Forum Specifications“. NOTE: Available at http:/www.mfaforum.org/tech/atm_specs.shtml. 4 ETSI TS 123 107: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Quality of Service (QoS)

29、concept and architecture (3GPP TS 23.107 version 6.4.0 Release 6)“. 5 ETSI TR 101 865: “Satellite Earth Stations and Systems (SES); Satellite component of UMTS/IMT-2000; General aspects and principles“. 6 ETSI TR 102 353: “Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (B

30、SM); Guidelines for the Satellite Independent Service Access Point (SI-SAP);“. 7 ETSI TS 102 357: “Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Common Air interface specification; Satellite Independent Service Access Point SI-SAP“. 8 ETSI TS 102 295: “Satellite E

31、arth Stations and Systems (SES); Broadband Satellite Multimedia (BSM) services and architectures; BSM Traffic Classes“. 9 ETSI TR 102 187: “Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia; Overview of BSM families“. 3 Definitions and abbreviations 3.1 Definitions For the p

32、urposes of the present document, the following terms and definitions apply: broadcast: communication capability which denotes unidirectional distribution to an unspecified number of access points connected to the network NOTE: The communication may reach any or all access points and each terminal ma

33、y select which broadcast information to receive. BSM bearer service: user plane (U-plane) data transmission services provided by the BSM subnetwork at the SI-SAP interfaces. NOTE 1: A BSM bearer service includes all QoS and other bearer service properties, as viewed at those SI-SAP interfaces. NOTE

34、2: BSM bearer services are a specific form of layer 2 service access point services. BSM bearer services are therefore not the same as a Telecommunications bearer service as defined below. BSM Network: a BSM subnetwork together with the BSM interworking and adaptation functions that are required to

35、provide an interface into the attached networks BSM Subnetwork: all the BSM network elements below the Satellite Independent Service Access Point (SI-SAP) BSM System (BSMS): A BSM System corresponds to a BSM Network together with the NMC and NCC plus any additional elements that are required to prov

36、ide the network services to the subscribers and their users. channel: means of unidirectional transmission of signals between two points NOTE: Channel is a generic term that can be used at different layers of the interface (e.g. physical channel, logical channel). Several channels may share a common

37、 transport mechanism. connection oriented: communication method in which communication proceeds through three well-defined phases: connection establishment, data transfer, connection release connectionless: communication method which allows the transfer of information between users without the need

38、for connection establishment procedures ETSI ETSI TR 101 984 V1.2.1 (2007-12) 8 control plane (C-plane): plane which has a layered structure and performs control functions for the various services NOTE: The C-plane deals with the signalling necessary to set up, maintain and release bearer services.

39、gateway (GW): network element that provides interworking between the BSM network and one or more external networks. layer management functions: management functions (e.g. meta-signalling) relating to resources and parameters residing in its protocol entities link: capability to exchange data between

40、 two points NOTE 1: Link is a generic term that can be used at different layers of the interface. For example: data link: capability of the data link layer to exchange data; and physical link: capability of the physical layer to exchange data. NOTE 2: Physical link (radio link) names can be used to

41、indicate the direction and/or the usage and/or the operating band. For example, “uplink“, “feeder link“ or “Ku-band link“. management plane (M-plane): plane which provides two types of functions, namely layer management functions and network management functions multicast: communication capability w

42、hich denotes unidirectional distribution from a single ingress service access point to a number of specified egress service access points multipoint: communication configuration attribute which denotes that the communication involves more than two service access points Network Control Centre (NCC):

43、equipment that provides the central control functions for a satellite network. Network Management Centre (NMC): equipment that provides the central management functions for a satellite network. Satellite Independent Service Access Point (SI-SAP): the interface between the satellite dependent lower l

44、ayers and the satellite independent upper layers of the Satellite Terminal air interface Satellite Terminal (ST): network element that contains at least one satellite network interface. NOTE: An ST normally contains at least one other network interface and two different types of ST can be defined: U

45、ser ST: that provides interworking between the satellite network and a premises network. Gateway ST: that provides interworking between the satellite network and an external network. service attribute: specified characteristic of a telecommunication service NOTE: The value(s) assigned to one or more

46、 service attributes may be used to distinguish that telecommunication service from others. telecommunication service: service offered by a network operator or service provider to its customers in order to satisfy a specific telecommunication requirement NOTE: Telecommunication services are divided i

47、nto two broad families: bearer services and teleservices: telecommunications bearer service: type of telecommunication service that provides the capability of transmission of signals between user access points, typically the user-network interface (UNI); teleservice: type of telecommunication servic

48、e that provides the complete capability, including terminal equipment functions, for communication between users according to standardized protocols and transmission capabilities established by agreement between operators traffic class (or service class): service offered to the users described by a

49、set of performance parameters and their specified values, limits or ranges NOTE: The set of parameters provides a comprehensive description of the service capability. user plane (U-plane): plane which has a layered structure and provides for user data transfer ETSI ETSI TR 101 984 V1.2.1 (2007-12) 9 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ASP Application Service Provider AESA ATM End System Addresses ATM Asynchronous Transfer Mode BSM Broadband Satellite Multimedia BSMS Broadband Satel