ETSI GS LTN 001-2014 Low Throughput Networks (LTN) Use Cases for Low Throughput Networks (V1 1 1)《低吞吐量网络 (LTN) 低吞吐量网络的用例》.pdf

《ETSI GS LTN 001-2014 Low Throughput Networks (LTN) Use Cases for Low Throughput Networks (V1 1 1)《低吞吐量网络 (LTN) 低吞吐量网络的用例》.pdf》由会员分享，可在线阅读，更多相关《ETSI GS LTN 001-2014 Low Throughput Networks (LTN) Use Cases for Low Throughput Networks (V1 1 1)《低吞吐量网络 (LTN) 低吞吐量网络的用例》.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI GS LTN 001 V1.1.1 (2014-09) Low Throughput Networks (LTN); Use Cases for Low Throughput Networks Disclaimer This document has been produced and approved by the Low Throughput Networks (LTN) ETSI Industry Specification Group (ISG) and represents the views of those members who participated in th

2、is ISG. It does not necessarily represent the views of the entire ETSI membership. GROUP SPECIFICATION ETSI ETSI GS LTN 001 V1.1.1 (2014-09) 2Reference DGS/LTN-001 Keywords LTN, M2M, network ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65

3、47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org The present document may be made available in electronic versions and/or in print. The conte

4、nt of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Docum

5、ent Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/

6、tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including ph

7、otocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institut

8、e 2014. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks

9、registered and owned by the GSM Association. ETSI ETSI GS LTN 001 V1.1.1 (2014-09) 3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations

10、 . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 LTN Overview . 7g34.1 Introduction 7g34.2 LTN characteristics Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server

11、(http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, es

12、sential to the present document. Foreword This Group Specification (GS) has been produced by ETSI Industry Specification Group (ISG) Low Throughput Networks (LTN). Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “may not“, “need“, “need not“, “wil

13、l“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction Low Throughput Network (LTN) is

14、 a technology of wide area wireless network with specific characteristics compared to existing radio networks. LTN enables long range data transportation (distances up to 40 km in open field) and has the capacity to communicate with underground equipment, using minimal power consumption. Furthermore

15、, the low throughput transmission combined with advanced signal processing provides effective protection against interference. As a consequence, LTN is particularly well adapted for low throughput machine to machine (M2M) traffic where latency may be low. LTN can be applied to autonomous battery ope

16、rated M2M devices that sends only a few bytes per day, week or month. LTN networks can cooperate with cellular networks addressing use cases where redundancy, complementary or alternative connectivity is suitable. The elements provided in the document are intended to identify potential areas of stan

17、dardization to ensure interoperability and provide guidelines for device, modem and software solutions for vendors, integrators and operators. The document is intended for an audience with a business vision whereas the architecture document GS LTN 002 1 addresses the technical architecture of LTN. C

18、lause 4 describes the LTN network main characteristics and compares LTN with other communications networks (GSM/cellular/PMR), by outlining key differentiators. Clause 5 lists typical use cases with their individual characteristics and associated constraints. Parameters and criteria are described wi

19、th the objective to get an overview of all applicable use cases. Clause 6 describes specific use cases where the usage of LTN brings a significant advantage over regular communication networks. ETSI ETSI GS LTN 001 V1.1.1 (2014-09) 51 Scope The present document aims to: provide an overview of LTN; i

20、llustrate the applicability of LTN for industrial scenarios amongst M2M use cases which are particularly suitable for LTN technology. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only

21、 the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyp

22、erlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ETSI GS LTN 002: “Low Throughput Networks (LTN); Functional

23、Architecture“. 2 IEEE 802.15.4TM-2011: “IEEE Standard for Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs)“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist

24、the user with regard to a particular subject area. i.1 General facts and figures in France, produced by French Government. NOTE: Available at http:/www.insee.fr/. i.2 EN 13757: “Communication system for readers and remote reading of meters“. i.3 ETSI TR 102 691: “Machine-to-Machine communications (M

25、2M); Smart Metering Use Cases“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: accelerometer: device that measures proper acceleration actuator: type of motor that is responsible for moving or controlling a mechani

26、sm or system authentication: property by which the correct identity of an entity or party is established with a required assurance back end system(s): system that supports back-office applications ETSI ETSI GS LTN 001 V1.1.1 (2014-09) 6budget link: way of quantifying the link performance cyphering:

27、cryptographic transformation of data (see cryptography) to produce cipher text geofencing: application that uses the global positioning system (GPS) or radio frequency identification (RFID) to define geographical boundaries IEEE 802.15.4 compliant protocol: specification for a suite of high level co

28、mmunication protocols used to create personal area networks built from small, low-power digital radios multicast: communication between a single sender and multiple receivers payload: cargo information within data transmission practical daylight indoor: terminology used in radio to express range of

29、coverage radio downlink: transmission path from a cell site to LTN End Point (LEP) security: ability to prevent fraud as well as the protection of information availability, integrity and confidentiality turbidity: key indicator of water quality in stream and watershed monitoring unicast: communicati

30、on between a single sender and a single receiver over a network Wireless Mbus: M-Bus interface is made for communication on two wires NOTE: A radio variant of M-Bus is Wireless M-Bus. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ADSL Asymmetric Digit

31、al Subscriber Line Ah Amp-hours CAPEX CAPital EXpenditure CO Carbon monoxide CO2 Carbon dioxide DA Device Authentication DI Data Integrity DP Data PrivacyECG ElectroCardioGraphy GPRS General Packet Radio Service GPS Global Positioning SystemGSM Global System for Mobile communications GWY GateWaY HES

32、 Head End System IHD In-Home DisplayIP Internet Protocol LAP LTN Access Point LEP LTN End-PointLPWA Low Power Wide Area LTN Low Throughput Network M2M Machine to Machine NW NetWork OPEX OPerating EXpense OTA Over-The-Air PAYD Pay As You Drive PMR Private land Mobile Radio PSTN Public Switched Teleph

33、one Network RTC Real Time Clock SMS Short Message Service UHF Ultra High Frequency VHF Very High Frequency VOC Volatile Organic Compounds ETSI ETSI GS LTN 001 V1.1.1 (2014-09) 7WAN Wireless Access Network Wh microwatt-hour 4 LTN Overview 4.1 Introduction This clause provides an overview of some of t

34、he main characteristics of the LTN network. As illustrated in figure 1, the LTN network is typically based on LTN End-Point(s) (LEP) connected via a Radio Network to one or multiple LAP(s) (LTN Access Point). LTN networks are managed by Back End System(s) and deliver end user services via Customer S

35、ervice Platform(s). More details on the building blocks and interfaces (A, B, C) are provided in the LTN architecture document GS LTN 002 1. Figure 1: LTN network overview 4.2 LTN characteristics M2M service requirements“. ETSI TS 102 690: “Machine-to-Machine communications (M2M); Functional archite

36、cture“. ETSI TS 102 921: “Machine-to-Machine communications (M2M); mIa, dIa and mId interfaces“. ETSI EN 300 220: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels rangin

37、g up to 500 mW“. ETSI EN 300 113-1: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 1: Technical charac

38、teristics and methods of measurement“. ETSI EN 300 113-2: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Pa

39、rt 2: Harmonized EN covering the essential requirements of article 3.2 of the R Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R System Ref

40、erence document (SRdoc): Spectrum Requirements for Short Range Device, Metropolitan Mesh Machine Networks (M3N) and Smart Metering (SM) applications“. ETSI TR 102 725: “Machine-to-Machine communications (M2M); Definitions“. ETSI TR 102 935: “Machine-to-Machine communications (M2M); Applicability of

41、M2M architecture to Smart Grid Networks; Impact of Smart Grids on M2M platform“. ETSI TR 102 898: “Machine to Machine communications (M2M); Use cases of Automotive Applications in M2M capable networks“. ETSI TR 102 732: “Machine-to-Machine Communications (M2M); Use Cases of M2M applications for eHea

42、lth“. ETSI TR 102 966: “Machine-to-Machine Communications (M2M); Interworking between the M2M Architecture and M2M Area Network technologies“. ETSI TR 102 886 (V1.1.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM);Technical characteristics of Smart Metering (SM) Short Range Devices (SRD) in the UHF Band; System Reference Document, SRDs, Spectrum Requirements for Smart Metering European access profile Protocol (PR-SMEP)“. ETSI ETSI GS LTN 001 V1.1.1 (2014-09) 19History Document history V1.1.1 September 2014 Publication