ETSI EN 301 461-2002 Fixed Radio Systems Point-to-Point Equipment High Capacity Fixed Radio Systems Carrying SDH Signals (2 x STM-1) in Frequency Bands with 40 MHz Channel Spacing _1.pdf

《ETSI EN 301 461-2002 Fixed Radio Systems Point-to-Point Equipment High Capacity Fixed Radio Systems Carrying SDH Signals (2 x STM-1) in Frequency Bands with 40 MHz Channel Spacing _1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 461-2002 Fixed Radio Systems Point-to-Point Equipment High Capacity Fixed Radio Systems Carrying SDH Signals (2 x STM-1) in Frequency Bands with 40 MHz Channel Spacing _1.pdf（31页珍藏版）》请在麦多课文档分享上搜索。

1、ETSI EN 30 1 46 1 VI .3.1 (2002-11) European Sfandard (Telecommunicafions series) Fixed Radio Systems; Point-to-point equipment; High capacity fixed radio systems carrying SDH signals (2 x STM-1) in frequency bands with 40 MHz channel spacing and using Co-Channel Dual Polarized (CCDP) operation 2 ET

2、SI EN 301 461 V1.3.1 (2002-11) Reference REN/TM-04140 Keywords DRRS, point-to-point, radio, SDH, STM, transmission, DFRS ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucra

3、tif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived differenc

4、e in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that t

5、he document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may b

6、e reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2002. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of it

7、s Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI EN 301 461 V1.3.1 (2002-11) Contents Intellectual P

8、roperty Rights . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Foreword 1 2 3 3.1 3.2 4 4.1 4.2

9、 4.3 4.4 4.5 4.5.1 4.5.2 4.6 4.7 4.8 4.9 4.10 4.11 Scope . References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . .7 Symbo

10、ls and abbreviations . . . . .9 . 9 . 9 General Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11、 1 O 10 11 11 11 11 locations) 12 12 12 12 12 13 13 Frequency bands and channel arrangements Modes of operation . Compatibility requirements between systems Error Performance and availability requireme Environmental profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . Equipment within wea

12、ther protected 1 Equipment for non-weather protected locations (outdoor locations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical dimensions . Power supply . Electromagnetic compatibil . Block diagram . TMN interface . Branching feeder and antenna requirements Antenna c

13、ross-polar discrimnation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14、 . . . . . . . . . . . . . . . . . . . . . . . . 14 14 14 14 14 14 14 Antenna radiation pattern . 4.11.4 Waveguide flanges . . . 4.11.5 Return Loss (RL) . 4.11.1 4.11.2 4.11.3 Antenna Inter-Port Is 4.11.6 Intermodulation products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Parameters for digital systems 15 5.1 Transmission capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 5.2 Baseband parameters 15 5.2.1 Plesiochronous interfaces . . . . . . . . . . . . . . . . . . . 15

16、 5.2.2 SDH baseband interface . . . . . . . . . . . . . . . . . . 15 5.3 Transmitter characteristics. . 15 5.3.1 Transmitter power range . 15 Automatic Transmit Power Control. . 15 16 5.3.2 5.3.3 Transmitter output power tolerance . 5.3.4 TX local oscillator frequency arrangements . . 16 RF spectrum

17、 mask . 16 17 5.3.5 Discrete CW lines ex rum mask limt 17 5.3.6 5.3.6.1 Spectral lines at the symbol rate . 17 18 18 18 19 19 19 19 . . 20 . . 20 . . 20 . . 20 . . 20 5.3.6.2 Other spectral lines . 5.3.7 Spurious emissions . . 5.3.7.1 . 5.3.7.2 5.3.8 . 5.4 Receiver characteristics. . 5.4.1 5.4.2 5.4

18、.3 5.4.3.1 5.4.3.2 5.4.4 5.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RX lo

19、cal oscillator frequency arrangements. . Spurious emssions Spurious emssions - external . Spurious emssions - internal . Receiver image rejection . System performance without diversity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20、 ETSI 4 ETSI EN 301 461 V1.3.1 (2002-11) 5.5.1 5.5.2 5.5.3 5.5.3.1 5.5.3.2 5.5.3.3 5.5.4 5.6 5.6.1 5.6.2 5.7 5.7.1 5.7.2 BER as a function of receiver input signal level RSL 20 Equipment residual BER 21 Interference sensitivity 21 Co-channel “external“ interference sensitivity 21 Adjacent channel in

21、terference sensitivity 21 CW interference 22 Distortion sensitivity . 22 Cross Polar Interference Sensitivity . 23 Co-channel “internal“ interference sensitivity in flat fading conditions . 23 Co-channel “internal“ interference sensitivity in dispersive fading conditions 23 System characteristics wi

22、th diversity . 23 Differential delay compensation 23 BER performance 24 . . . . Annex A (informative): Additional Information . 26 A . 1 Antenna requirements . 26 A . 1.1 Antenna radiation patterns 26 A . 1.2 Antenna Cross-Polar Discrimination 26 A . 1.3 Antenna Inter-Port Isolation (IPI) 26 A . 1.4

23、 Feededantenna return loss 26 A.2 Automatic Transmit Power Control . 26 A.3 Spectrum masks 27 A.4 Co-channel (internal and external) and adjacent channel interference . 27 A.5 Measurement test set for XPI characteristics . 29 Annex B (informative): Bibliography . 30 History 31 ETSI 5 ETSI EN 301 461

24、 V1.3.1 (2002-11) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 3 14: “In

25、tellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches,

26、 has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) ha

27、s been produced by ETSI Technical Committee Transmission and Multiplexing (TM). The present document introduces new classes and grades of equipments focused on applications with single or few channels per links, with or without the XPIC option, suitable for Co-polar adjacent channel operation; typic

28、al for mobile networks infrastructures. National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 1 Nove

29、mber 2002 28 February 2003 3 1 August 2003 3 1 August 2003 ETSI 6 ETSI EN 301 461 V1.3.1 (2002-11) 1 Scope The present document specifies the minimum performance parameters for a high capacity digital radio-relay system operating in frequency bands with 40 MHz channel spacing in the 4 GHz, 5 GHz, U6

30、 GHz and 11 GHz bands. The channel capacity is 1 x STM 1 on each polarization that allows to transmit up to 2 x STM 1 signals in the same RF channel by using both polarizations in Co-channel dual polarized (CCDP) mode of operation with cross-polar interference canceller techniques (XPIC). The presen

31、t document is also applicable to 1 x STM-1 ACCP systems operating with Co-polar arrangement of 40 MHz for which the CCDP operation with XPIC is considered a non applicable option; for those systems the clauses relevant to XPIC operation (i.e. Co-channel “internal“ interference) are not applicable. T

32、hese systems are intended for local high capacity links (e.g. mobile infrastructure connections) where few channels may be used by different operators) and the crowded environment may require Co-polar operation on adjacent channels. Recognizing the benefits from the industrial point of view, two dif

33、ferent grades of system have been defined. Grade A: based on 30 MHz-like system technology (i.e. based on 128 states modulation) with reduced receiver BER threshold capability. Grade B: based on 40 MHz system technology (i.e. based on 64 states modulation) with improved receiver BER threshold capabi

34、lity. It has to be noted that STM- 1 systems can be grouped in order to offer an SDH interface higher than STM- 1. The area of application of these digital radio-relay systems is foreseen to be in trunk and access networks forming part of an SDH-network including optical rings. Systems considered in

35、 the present document shall be able to respect ITU-R and ITU-T performance objectives. The systems considered should operate in these networks having regard for existing hop length, which are considered to be normally up to about 30 km to 40 km for access and about 60 km for trunk networks, respecti

36、vely. Hop lengths greater than this latter length are used in special applications. The systems considered in the present document are intended to allow operation with respect to existing PDH systems using 16 QAM modulation and transmitting 140 Mbit/s applying a channel spacing of 40 MHz. The parame

37、ters specified fall into two categories: a) parameters that are required to provide compatibility between channels connected to the same antenna via a multichannel branching system, or channels on the same route connected to separate antennas; NOTE: Due to the internal functionality of the XPIC, equ

38、ipment operating on both polarization of the same channel is considered to form a single CCDP system. b) parameters defining the transmission quality of the proposed system. The standardization deals with baseband, IF and RF characteristics relevant to SDH. Antenna/feeder system requirements are als

39、o considered for information to the reader, however antenna characteristics are generally covered in EN 300 833 34. Baseband interfaces have to be considered for STM-1 signals in accordance with ITU-T Recommendations G.707 i and G.957 2. PDH interfaces according to ITU-T Recommendation G.703 3 for s

40、ignals mapped into STM-1 signals according to ITU-T Recommendation G.707 i could be used. Safety aspects will not be considered in the present document. ETSI 7 ETSI EN 301 461 V1.3.1 (2002-11) 2 Re fe re nces The following documents contain provisions which, through reference in this text, constitut

41、e provisions of the present document. References are either specific (identified by date of publication andor edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. ITU-T Recommendation

42、 G.707N. 1322 (2000): “Network node interface for the synchronous digital hierarchy (SDH)“. ITU-T Recommendation G.957 (1 999): “Optical interfaces for equipments and systems relating to the synchronous digital hierarchy“. ITU-T Recommendation G.703 (200 1): “PhysicaVelectrical characteristics of hi

43、erarchical digital interfaces“. CEPT/ERC/REC 12-08: “Harmonised radio frequency channel arrangements and block allocations for low, medium and high capacity systems in the band 3 600 MHz to 4 200 MHz“. ITU-R Recommendation F.635-6: “Radio-frequency channel arrangements based on a homogeneous pattern

44、 for radio-relay systems operating in the 4 GHz band“. ITU-R Recommendation F. 1099-3 : “Radio-frequency channel arrangements for high-capacity digital radio-relay systems in the 5 GHz (4 400 - 5 O00 MHz) band“. CEPT/ERC/REC 14-02: “Radio-frequency channel arrangements for medium and high capacity a

45、nalogue or high capacity digital radio-relay systems operating in the band 6 425 MHz - 7 125 MHz“. ITU-R Recommendation F.3 84-7: “Radio-frequency channel arrangements for medium and high capacity analogue or digital radio-relay systems operating in the upper 6 GHz band“. CEPT/ERC/REC 12-06: “Harmon

46、ised radio frequency channel arrangements for digital terrestrial fixed systems operating in the band 10,7 GHz to 11,7 GHz“. ITU-R Recommendation F.3 87-9: “Radio-frequency channel arrangements for radio-relay systems operating in the 11 GHz band“. ITU-T Recommendation G.826 (1999): “Error performan

47、ce parameters and objectives for international, constant bit rate digital paths at or above the primary rate“. ITU-R Recommendation F. 1397: “Error performance objectives for real digital radio links used in the international portion of a 27 500 km hypothetical reference path at or above the primary

48、 rate“. ITU-R Recommendation F. 1491: “Error performance objectives for real digital radio links used in the national portion of a 27 500 km hypothetical reference path at or above the primary rate“. ITU-R Recommendation F.752- 1 : “Diversity techniques for radio-relay systems“. ITU-R Recommendation

49、 F. 1093-1 : “Effects of multipath propagation on the design and operation of line-of-sight digital radio-relay systems“. ITU-R Recommendation F. 1 101 : “Characteristics of digital fixed wireless systems below about 17 GHz“ . ETSI EN 300 O 19 (all parts): “Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment“. ETSI 8 ETSI EN 301 461 V1.3.1 (2002-11) i181 i2