EN ISO 9692-3-2016 en Welding and allied processes - Types of joint preparation - Part 3 Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys《焊接和相关工艺的.pdf

《EN ISO 9692-3-2016 en Welding and allied processes - Types of joint preparation - Part 3 Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys《焊接和相关工艺的.pdf》由会员分享，可在线阅读，更多相关《EN ISO 9692-3-2016 en Welding and allied processes - Types of joint preparation - Part 3 Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys《焊接和相关工艺的.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 9692-3:2016W e l d i n g a n d a l l i e d p r o c e s s e s T y p e s o f j o i n t p r e p a r a t i o nPart 3: Metal inert gas welding andtungsten inert gas welding of aluminiumand its alloys (ISO 9692-3:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15

2、:06BS EN ISO 9692-3:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO9692-3:2016. It supersedes BS EN ISO 9692-3:2001 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee WEE/1, Definitions and symbols for welding.

3、A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards

4、 Limited 2016ISBN 978 0 580 82946 8ICS 25.160.10; 25.160.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2016.Amendments/corrigenda issued since publicat

5、ionDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9692-3 July 2016 ICS 25.160.10 Supersedes EN ISO 9692-3:2001English Version Welding and allied processes - Types of joint preparation -Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium a

6、nd its alloys (ISO 9692-3:2016) Soudage et techniques connexes - Types de prparation de joints - Partie 3: Soudage MIG et TIG de laluminium et de ses alliages (ISO 9692-3:2016) Schweien und verwandte Prozesse - Empfehlungen fr Fugenformen - Teil 3: Metall-Inertgasschweien und Wolfram-Inertgasschweie

7、n von Aluminium und Aluminium-Legierungen (ISO 9692-3:2016) This European Standard was approved by CEN on 10 July 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without

8、 any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other lan

9、guage made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denma

10、rk, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE F

11、OR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9692-3:2016 EBS EN ISO 9692-

12、3:2016EN ISO 9692-3:2016 (E) 3 European foreword This document (EN ISO 9692-3:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This Euro

13、pean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2017, and conflicting national standards shall be withdrawn at the latest by January 2017. Attention is drawn to the possibility that some of the ele

14、ments of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 9692-3:2001. This document has been prepared under a mandate given to CEN by the European Commission and the Eur

15、opean Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repu

16、blic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 9692-3:2016 has been a

17、pproved by CEN as EN ISO 9692-3:2016 without any modification. BS EN ISO 9692-3:2016ISO 9692-3:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Materials . 14 Welding processes 15 Finish 16 Type of joint preparation 2 ISO 2016 All rights reserved iiiContents PageBS EN ISO 9692-3:

18、2016ISO 9692-3:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a

19、subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission

20、 (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should

21、be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identi

22、fying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenien

23、ce of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Foreword Sup

24、plementary information .The committee responsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 7, Representation and terms.This second edition cancels and replaces the first edition (ISO 96923:2000), which has been technically revised.ISO 9692 consists of the followi

25、ng parts, under the general title Welding and allied processes Types of joint preparation: Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels Part 2: Submerged arc welding of steels Part 3: Metal inert gas welding and tungsten inert

26、gas welding of aluminium and its alloys Part 4: Clad steelsRequests for official interpretations of any aspect of this International Standard should be directed to the Secretariat of ISO/TC 44/SC 7 via your national standards body. A complete listing of these bodies can be found at www.iso.org.iv IS

27、O 2016 All rights reservedBS EN ISO 9692-3:2016ISO 9692-3:2016(E)IntroductionThis part of ISO 9692 defines the parameters characterizing the joint preparation and assembly of the most often encountered dimensions and shapes.The recommendations given in this part of ISO 9692 have been compiled on the

28、 basis of experience and contain dimensions for types of joint preparation that are generally found to provide suitable welding conditions. However, the extended field of application makes it necessary to give a range of dimensions. The dimension ranges specified represent design limits and are not

29、tolerances for manufacturing purposes. Manufacturing limits depend, for instance, on welding process, parent metal, welding position, quality level, etc. Due to the common character of this part of ISO 9692, the examples given cannot be regarded as the only solution for the selection of a joint type

30、.Specific fields of application and manufacturing requirements may be covered by selected ranges of dimensions specified in the relevant application standard. ISO 2016 All rights reserved vBS EN ISO 9692-3:2016BS EN ISO 9692-3:2016Welding and allied processes Types of joint preparation Part 3: Metal

31、 inert gas welding and tungsten inert gas welding of aluminium and its alloys1 ScopeThis part of ISO 9692 specifies recommended types of joint preparation for metal inert gas welding, MIG (131), and tungsten inert gas welding, TIG (141), and autogenous TIG welding (142) on aluminium and its alloys.I

32、t applies to fully penetrated welds.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refer

33、enced document (including any amendments) applies.ISO 2553:2013, Welding and allied processes Symbolic representation on drawings Welded jointsISO 4063, Welding and allied processes Nomenclature of processes and reference numbers3 MaterialsJoint preparations recommended in this part of ISO 9692 are

34、suitable for all types of aluminium and its weldable alloys.4 Welding processesJoint preparations recommended in this part of ISO 9692 are suitable for welding carried out in accordance with the following processes as specified in Tables 1 to 3. Combinations of different processes are possible: MIG

35、welding with solid wire electrode (131); TIG welding with solid filler material (wire/rod) (TIG) (141); autogenous TIG welding (142) only applicable for butt weld between plates with raised edges (see Table 1, 1.20)NOTE The numbers in parentheses refer to the reference number of the welding process

36、specified in ISO 4063.5 FinishEdges should be prepared by mechanical means (e.g. shearing, sawing or milling). No mineral oil-based cleaning fluids shall be used. If plasma cutting is used, consideration shall be given to the quality of cut surfaces (e.g. cracks).INTERNATIONAL STANDARD ISO 9692-3:20

37、16(E) ISO 2016 All rights reserved 1BS EN ISO 9692-3:2016ISO 9692-3:2016(E)The longitudinal edges of the root face should be de-burred and chamfered, especially for single-sided butt welds without backing.6 Type of joint preparationThe recommended types of joint preparation and dimensions are specif

38、ied in Tables 1 to 3.The choice of joint details (angle, gap, thickness of root face) depends on the joint thickness, the position and the welding process. The use of larger gaps (1,5 mm) permits smaller angles.If gaps are 1,5 mm, backing is preferably used.For single-sided welding, backing bars sho

39、uld be grooved.The reference numbers in Tables 1 to 3 have been determined in accordance with the following scheme: the first digit corresponds with the number of the table (e.g. digit 1 for Table 1 with joint preparation for butt welds, welded from one side); the second digit or numerical group cor

40、responds with the number in ISO 2553 (e.g. digit 2 for square butt weld as given in ISO 2553:2013, Table 1); the third indication, expressed by a letter, covers the variants of joint preparations.EXAMPLE Joint preparation for a butt weld, welded from one side (1), finished for single-V butt weld (3)

41、:1.32 ISO 2016 All rights reservedBS EN ISO 9692-3:2016ISO 9692-3:2016(E)Table1 Joint preparation for butt welds, welded from one sideDimensions in millimetresWeldJointpreparationRecommend-edweldingprocesscRemarksRef.No.aWorkpiecethicknesstDesignationSymbolbIllustrationCross-sectionAngle, GapbThick-

42、nessof rootfacecOtherdimensions1.1t4Square butt weldb1141Chamfering on the root side is rec-ommended2t4Square butt weld with temporary (MR) or perma-nent (M) backingb1,51311.23t5Single-V butt weld6090b2c2131Single-V butt weld withremovable/temporary (MR)or permanent (M)backing6090b4c2131 ISO 2016 Al

43、l rights reserved 3BS EN ISO 9692-3:2016ISO 9692-3:2016(E)WeldJointpreparationRecommend-edweldingprocesscRemarksRef.No.aWorkpiecethicknesstDesignationSymbolbIllustrationCross-sectionAngle, GapbThick-nessof rootfacecOtherdimensions1.33t6Single-V butt weld90120b11c21413t15Single-V butt weld with broad

44、 root face60b2c21316t25Single-V butt weld with broad root face with temporary (MR) or permanent (M) backing604b10c31316t15Single-V butt weld with broad root face90120b12c4141Table1(continued)4 ISO 2016 All rights reservedBS EN ISO 9692-3:2016ISO 9692-3:2016(E)WeldJointpreparationRecommend-edweldingp

45、rocesscRemarksRef.No.aWorkpiecethicknesstDesignationSymbolbIllustrationCross-sectionAngle, GapbThick-nessof rootfacecOtherdimensions1.3A2t20Single-V butt weld on extruded profile2040b31c31311411.3B6t40Single-V butt weld on extruded profile20450b32c3c111311411.44t10Single-bevelbuttweld50b3c21313t20Si

46、ngle-bevelbutt weld with temporary (MR) or permanent (M) backing50703b8c2131141Table1(continued) ISO 2016 All rights reserved 5BS EN ISO 9692-3:2016ISO 9692-3:2016(E)WeldJointpreparationRecommend-edweldingprocesscRemarksRef.No.aWorkpiecethicknesstDesignationSymbolbIllustrationCross-sectionAngle, Gap

47、bThick-nessof rootfacecOtherdimensions1.6platet12tpipet5Single-U butt weld (slopingsides)1520b12c44r63f40e414115t3015201b32c44r63f40e4131Preferableroot run: 141.1.178t20Steep-flankedsingle-V butt weld with temporary (MR) or perma-nent (M) backing15203b101311.20t2Butt weldbetweenplates with raisededg

48、es141142aAs explained in Clause6.bInaccordancewithISO2553.cReference number in accordance with ISO4063.Table1(continued)6 ISO 2016 All rights reservedBS EN ISO 9692-3:2016ISO 9692-3:2016(E)Table2 Joint preparation for butt welds, welded from both sidesDimensions in millimetresWeldJointpreparationRec

49、ommend-edweldingprocesscRemarksRef.No.aWorkpiecethicknesstDesignationSymbolbIllustrationCross-sectionAngle, GapbThick-nessof rootfacecOtherdimensions2.16t10Square butt weld6b8141Simultane-ouswelding both sides vertical.2.2.26t15Double-V buttweld60b3c2141t1570c21312.2.36t15Double-Vbutt weld with broad root face