EN 61883-3-2005 en Consumer audio video equipment - Digital interface Part 3 HD-DVCR data transmission《用户音频 视频设备 数字接口 第3部分 HD-DVCR数据传输 IEC 61883-3 2004》.pdf

《EN 61883-3-2005 en Consumer audio video equipment - Digital interface Part 3 HD-DVCR data transmission《用户音频 视频设备 数字接口 第3部分 HD-DVCR数据传输 IEC 61883-3 2004》.pdf》由会员分享，可在线阅读，更多相关《EN 61883-3-2005 en Consumer audio video equipment - Digital interface Part 3 HD-DVCR data transmission《用户音频 视频设备 数字接口 第3部分 HD-DVCR数据传输 IEC 61883-3 2004》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN61883-3:2005Consumer audio/video equipment Digital interface Part 3: HD-DVCR data transmissionThe European Standard EN 61883-3:2005 has the status of a British StandardICS 35.200; 33.160.01g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g

2、50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 61883-3:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 26 January 2006 BSI 26 January 2006ISBN 0 580 47578 6National fore

3、wordThis British Standard is the official English language version of EN 61883-3:2005. It is identical with IEC 61883-3:2004. It supersedesBS EN 61883-3:1998 which will be withdrawn on 1 November 2008.The UK participation in its preparation was entrusted to Technical Committee EPL/100, Audio, video

4、and multimedia systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI

5、 Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for it

6、s correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests i

7、nformed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 10, an inside back cover and a back cover.The BSI copyright notice displayed in this document ind

8、icates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 61883-3 NORME EUROPENNE EUROPISCHE NORM November 2005 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Kom

9、itee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61883-3:2005 E ICS 35.200; 33.160.01 Supersedes EN 61883-3:1998English version Consu

10、mer audio/video equipment - Digital interface Part 3: HD-DVCR data transmission (IEC 61883-3:2004) Matriel audio/vido grand public - Interface numrique Partie 3: Transmission de donnes HD-DVCR (CEI 61883-3:2004) Audio/Video-Gerte der Unterhaltungselektronik - Digitale Schnittstelle Teil 3: HD-DVCR-D

11、atenbertragung (IEC 61883-3:2004) This European Standard was approved by CENELEC on 2005-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-

12、to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in two official versions (English, German). A version in any other language made by translation under the

13、responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

14、 Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 2 Foreword The text of the International Standard IEC 61883-3:2004, prepared by technical area 4, Digital system interfac

15、es and protocols, of IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the formal vote and was approved by CENELEC as EN 61883-3 on 2005-11-01. This European Standard supersedes EN 61883-3:1998. It contains the following significant technical changes with respect to EN

16、61883-3:1998: added specifications of IEEE 1394 packet, CIP header and transmission timing in high speed transmission. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-11-

17、01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2008-11-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61883-32:2004 was approved by CENELEC as a European Standard without any modification. In t

18、he official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61834-1 NOTE Harmonized as EN 61834-1:1998 (not modified). EN 61883-3:2005 3 CONSUMER AUDIO/VIDEO EQUIPMENT DIGITAL INTERFACE Part 3: HD-DVCR data transmission 1 Scope This part of IEC 61883 spe

19、cifies the packet format and the transmission timing for HD-DVCR data. It describes the specifications for the IEEE 1394 packet, the CIP header for 1125-60 and 1250-50 television systems, and the transmission timing. 2 Normative references The following referenced documents are indispensable for the

20、 application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61834-3, Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for c

21、onsumer use (525-60, 625-50, 1125-60 and 1250-50 systems) Part 3: HD format for 1125-60 and 1250-50 systems IEC 61883-1, Consumer audio/video equipment Digital interface Part 1: General IEC 61883-2, Consumer audio/video equipment Digital interface Part 2: SD-DVCR data transmission 3 Abbreviations Fo

22、r the purpose of this document, the following abbreviations apply: 1125-60 system: the 1125-line system with a frame frequency of 30,00 Hz 1250-50 system: the 1250-line system with a frame frequency of 25,00 Hz HD-DVCR: high-definition digital video cassette recorder IEEE 1394 packet: IEEE 1394 isoc

23、hronous packet defined in IEC 61883-1 4 Construction of IEEE 1394 packet 4.1 Source packet structure of the HD-DVCR data stream For the HD-DVCR data stream, the data structure for digital interface defined in IEC 61834-3, Clause 10 is used. The source packet size for the HD-DVCR data stream is 960 b

24、ytes, divided into 12 DIF blocks. The correspondence between DIF blocks and source packets for the 1125-60 system and the 1250-50 system are shown in Figure 1 and Figure 2 respectively. EN 61883-3:2005 4 4.2 Packetization of source packet of the HD-DVCR data stream A source packet shall not be divid

25、ed and shall be equal to a data block. Data blocks transmitted in an IEEE 1394 isochronous cycle shall be determined according to the TR value in the CIP header (see 5.2). An empty packet is placed in any cycle with no data block. Where the TR value is 002(1x), one or no data block is transmitted; 0

26、12(2x), two or no data block are transmitted; 102(4x), four or no data block are transmitted. The SYT field of the CIP header (see 5.1) is used to synchronize the transmitter and the receiver. 4.3 Transmission order of video frames for high-speed transmission Transmission order of data within one vi

27、deo frame is defined in Figure 1 and Figure 2. For high-speed transmission, the transmission order of each video frame data shall follow the time sequence. 5 CIP header 5.1 CIP header for HD-DVCR data stream The structure of the CIP header for the HD-DVCR data stream is the same as the structure of

28、the CIP header for the SD-DVCR data stream (see IEC 61883-2, 5.1). The DBS for HD takes different values from that for SD through the difference of data block size as given in 4.1. 5.2 FDF area The STYPE takes different values as shown in Table 1 of IEC 61883-2. Where the STYPE is 000102, TR is defi

29、ned as follows. TR: 012= 2x 102= 4x 112= Reserved for future definition 5.3 DBC values Increments of DBC value shall be determined according to the TR value. Where the TR value is 002(1x), the DBC value increments with 1; 012(2x), the DBC value is a multiple of 2; 102(4x), the DBC value is a multipl

30、e of 4. EN 61883-3:2005 5 5.4 CIP header for 1125-60 system For the 1125-60 system, the values of the CIP header components are as follows. DBS: 111100002FN: 002QPC: 0002SPH: 0 DBC (see 5.3) FMT: 000000250/60: 0 STYPE: 000102TR: 002= 1x, 012= 2x, 102= 4x 5.5 CIP header for 1250-50 system For the 125

31、0-50 system, the values of the CIP header components are as follows. DBS: 111100002FN: 002QPC: 0002SPH: 0 DBC (see 5.3) FMT: 000000250/60: 1 STYPE: 000102TR: 002= 1x, 012= 2x, 102= 4x 6 Transmission timing The transmitter shall transmit a time stamp value in the SYT field once every video frame peri

32、od. The time stamp should be transmitted in a packet that meets the following conditions: packet_arrival_time_L time stamp value time stamp value transmission_delay_limit packet_arrival_time_F where packet_arrival_time_F is the cycle time when the first bit of the packet which has the time stamp has

33、 arrived at the receiver; packet_arrival_time_L is the cycle time when the last bit of the packet which has the time stamp has arrived at the receiver; transmission_delay_limit = 450 s. In case of Hx (H = 1,2,4) transmission, KH data blocks are transmitted in a video frame period M using K isochrono

34、us packets. Isochronous packet n contains H data blocks of nH, nH+1, . and (n+1) H1. The isochronous packet n of a video frame period M should be transmitted on the following conditions (n = 0, . , K1): EN 61883-3:2005 6 packet_arrival_time_L nominal timing for isochronous packet n nominal timing fo

35、r isochronous packet n transmission_delay_limit packet_arrival_time_F where packet_arrival_time_F is the cycle time when the first bit of the isochronous packet n has arrived at the receiver; packet_arrival_time_L is the cycle time when the last bit of the isochronous packet n has arrived at the rec

36、eiver; K is the number of isochronous packets without empty packets in a video frame period. K = 250 (1125-60 system) K = 300 (1250-50 system) Nominal timing for isochronous packet n = TM + (M+1 TM) x n/K TMis the time stamp for video frame period M transmitted in the SYT field. EN 61883-3:2005 7 Fi

37、gure 1 Source packets of HD-DVCR 1125-60 system DIF Sequence 0DIF Sequence 1DIF Sequence 9249225A 0,0 V0,0 V0,1 V1,0V1,1V2,0V2,1V3,0V3,1V4,0V4,1 H0,0 SC0,0 VA0,0 VA1,0 VA2,0 SC1,0H 0,1 SC 0,1 SC1,1 VA0,1 VA1,1 VA 2,1 A 0,1 V128,0 V134,1 V134,0 V128,1 V129,0V129,1 V130,0 V 130,1 V131,0V131,1V132,0V13

38、2,1V133,0V133,1V127,0V127,1V126,1V126,0V123,0V123,1 V124,0 V 124,1 V125,0V125,1H0,0 SC0,0 VA0,0 VA1,0 VA2,0 SC1,0H 0,1 SC 0,1 SC1,1 VA0,1 VA1,1 VA 2,1 V134,1 V134,0 V129,0V129,1 V130,0 V 130,1 V131,0V131,1V132,0V132,1V133,0V133,1H 0,0 SC 0,0 VA0,0 VA1,0 VA2,0 SC1,0H0,1 SC 0,1 SC1,1 VA0,1 VA1,1 VA 2,

39、1 V134,1 V134,0 V129,0V129,1 V130,0 V 130,1 V131,0V131,1V132,0V132,1V133,0V133,10123242549Source packetsH0,k: Header DIF block 0, section k (k = 0,1)SCi,k: Subcode DIF block i , section k (i = 0,1), (k = 0,1)VAi,k: VAUX DIF block i, section k (i = 0,1,2), (k = 0,1)A i,k: Audio DIF block i, section k

40、 (i = 0,.,8), (k = 0,1)Vi,k: Video DIF block i, section k (i = 0,.,134), (k = 0,1)Key:IEC 1214/04 EN 61883-3:2005 8 Figure 2 Source packets of HD-DVCR 1250-50 system DIF Sequence 0DIF Sequence 1DIF Sequence 11299275A 0,0 V0,0 V0,1 V1,0 V1,1 V2,0 V2,1 V3,0 V3,1 V4,0 V4,1 H0,0 SC0,0 VA0,0 VA1,0 VA2,0

41、SC1,0H 0,1 SC 0,1 SC1,1 VA0,1 VA1,1 VA 2,1 A 0,1 V128,0 V134,1 V134,0 V128,1 V129,0V129,1 V130,0 V 130,1 V131,0V131,1V132,0V132,1V133,0V133,1V127,0V127,1V126,1V126,0V123,0V123,1 V124,0 V 124,1 V125,0V125,1H0,0 SC0,0 VA0,0 VA1,0 VA2,0 SC1,0H 0,1 SC 0,1 SC1,1 VA0,1 VA1,1 VA 2,1 V134,1 V134,0 V129,0V12

42、9,1 V130,0 V 130,1 V131,0V131,1V132,0V132,1V133,0V133,1H 0,0 SC 0,0 VA0,0 VA1,0 VA2,0 SC1,0H0,1 SC 0,1 SC1,1 VA0,1 VA1,1 VA 2,1 V134,1 V134,0 V129,0V129,1 V130,0 V 130,1 V131,0V131,1V132,0V132,1V133,0V133,10123242549Source packetsH0,k: Header DIF block 0, section k (k = 0,1)SCi,k: Subcode DIF block

43、i , section k (i = 0,1), (k = 0,1)VAi,k: VAUX DIF block i, section k (i = 0,1,2), (k = 0,1)A i,k: Audio DIF block i, section k (i = 0,.,8), (k = 0,1)Vi,k: Video DIF block i, section k (i = 0,.,134), (k = 0,1)Key:IEC 1215/04 EN 61883-3:2005 9 Bibliography The following document contains additional in

44、formation related to this standard: 1 IEC 61834-1, Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) Part 1: General specifications _ EN 61883-3:2005 10 Annex ZA (normative) Normative references t

45、o international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includin

46、g any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61834-3 - 1)Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape

47、 for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) Part 3: HD format for 1125-60 and 1250-50 systems EN 61834-3 2000 2)IEC 61883-1 - 1)Consumer audio/video equipment - Digital interface Part 1: General EN 61883-1 2003 2)IEC 61883-2 - 1)Part 2: SD-DVCR data transmission EN 61883-2 2005 2

48、)1)Undated reference. 2)Valid edition at date of issue. EN 61883-3:2005blankBS EN 61883-3:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at

49、the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsi