EN 60317-29-1996 en Specifications for particular types of winding wires Part 29 Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire class.pdf

《EN 60317-29-1996 en Specifications for particular types of winding wires Part 29 Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire class.pdf》由会员分享，可在线阅读，更多相关《EN 60317-29-1996 en Specifications for particular types of winding wires Part 29 Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire class.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN60317-29:1996+A2:2010Specifications for particular types of winding wiresPart 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class200ICS 29.060.10BS EN 60317-29:1996+A2:2010National forewordThis British Standard is the UK impl

2、ementation of EN 60317-29:1996+A2:2010. It is identical to IEC 60317-29:1990, incorporating amendments 1:1997 and 2:2010. It supersedes BS EN 60317-29:1997 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to

3、IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee GEL/55, Winding wires.A list of organizations represented on this committee can be obtained on request to its s

4、ecretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard, havingbeen prepared under thedirection of the E

5、lectrotechnicalSector Board, was publishedunder the authority of theStandards Board andcomes into effect on31 May 1991 BSI 2010Amendments/corrigenda issued since publicationAmd. No. Date Comments 9465 June 1997 Renumbers BS 6811-4.2 as BS EN 60317-2910378 May 1999 Implementation of IEC amendment 1:1

6、997 with CENELEC endorsement 1:199831 July 2010 Implementation of IEC amendment 2:2010 with CENELEC endorsement A2:2010; BSI and CEN publication dates alignedISBN 978 0 580 67186 9ELECEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN60317-29:1996+A2June 2010UDC 621.315.337.4-034.3:621.3.045ICS 29.06

7、0.10Supersedes HD555.29.S1:1992Descriptors: Winding, electric wire, insulated wire, enamelled wire, copper, polyester, polyamide, rectangular shape, specification, dimensionEnglish versionSpecifications for particular types of winding wiresPart29: Polyester or polyesterimide overcoated with polyamid

8、e-imide enamelled rectangular copper wire, class200(IEC60317-29:1990+A1:1997, A2:2010)Spcifications pour types particuliersde fils de bobinagePartie29: Fil de section rectangulaire en cuivre maill avec polyester ou polyesterimide et avec surcouche polyamide-imide, classe200(CEI60317-29:1990+A1:1997,

9、 A2:2010)Technische Lieferbedingungen fr bestimmte Typen von WickeldrhtenTeil29: Flachdrhte aus Kupfer, lackisoliert, mit Polyester oder Polyesterimid und darber mit Polyamidimid, Klasse200(IEC60317-31:1990+A1:1997, A2:2010)This European Standard was approved by CENELEC on1996-07-02;amendment A1 was

10、 approved by CENELEC on1997-10-01. CENELECmembers are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status ofa national standard without any alteration.Up-to-date lists and bibliographical references concerning such nati

11、onalstandards may be obtained on application to the Central Secretariat or to anyCENELEC member.This European Standard exists in three official versions (English, French,German). A version in any other language made by translation under theresponsibility of a CENELEC member into its own language and

12、 notified to theCentral Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria,Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland a

13、ndUnitedKingdom.CENELECEuropean Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B-1050 Brussels1996 Copyright reserved to CENELEC membersRef. No. EN60317-29:1996+A2:2

14、010 E2ForewordThe text of the International StandardIEC317-29:1990, prepared by IEC TC55, Winding wires, was approved by CENELEC as HD555.29 S1 on1992-06-16.This Harmonization Document was submitted to the formal vote for conversion into a European Standard and was approved by CENELEC as EN60317-29

15、on1996-07-02.The following date was fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC.Foreword to amendment A1The text of document55/560/FDIS, future amendment1 to IEC60317-29:1990, prepared by IEC

16、TC55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN60317-29:1996 on1997-10-01.The following dates were fixed: latest date by which the ENhas to be implemented at national level by publication of an identical national standard or by en

17、dorsement (dop)1997-06-01 latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop)1998-10-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow)1998-10-01Forew

18、ord to amendment A2The text of document 55/1184/FDIS, future amendment 2 to IEC 60317-29:1990, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 60317-29:1996 on 2010-06-01.Attention is drawn to the possibility that

19、 some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an iden

20、tical national standard or by endorsement (dop) 2011-03-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2013-06-01_Endorsement noticeThe text of amendment 2:2010 to the International Standard IEC 60317-29:1990 was approved by CENELEC as an ame

21、ndment to the European Standard without any modification._BS EN 60317-29:1996+A2:2010EN 60317-29:1996+A2:2010 (E) BSI 201031 ScopeThis International Standard specifies the requirements of enamelled rectangular copper winding wire of class200 with a dual coating. The underlying coating is based on po

22、lyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide-imide resin.NOTEA modified resin is a resin that has undergone a chemical change, or conta

23、ins one or more additives to enhance certain performance or application characteristics.Class200 is a thermal class that requires a minimum temperature index of200 and a heat shock temperature of at least220C.The temperature in degrees Celsius corresponding to the temperature index is not necessaril

24、y that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved.The range of nominal conductor dimensions covered by this standard is: Wires of grade1 and grade2 are included in this specification and apply to the complete ra

25、nge of conductors.The specified combinations of width and thickness as well as the specified width/thickness ratio are given in IEC317-0-2.2 Normative referencesThe following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At

26、the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO ma

27、intain registers of currently valid International Standards.4 DimensionsSeeclause4 of IEC317-0-2.5 Electrical resistanceSeeclause5 of IEC317-0-2.6 ElongationSeeclause6 of IEC317-0-2.7 SpringinessSeeclause7 of IEC317-0-2.8 Flexibility and adherenceSeeclause8 of IEC317-0-2.9 Heat shockSeeclause9 of IE

28、C317-0-2, where the minimum heat shock temperature shall be220C.10 Cut-through11 Resistance to abrasionTest inappropriate.12 Resistance to solventsSeeclause12 of IEC317-0-2.13 Breakdown voltageSeeclause13 of IEC317-0-2, where the elevated temperature shall be200C.14 Continuity of insulationTest inap

29、propriate. width: min. 2,0mm max. 16,0mm; thickness: min. 0,80mm max. 5,60mm.IEC 60317-0-2:1997, Specifi cations for particular types of winding wires Part 0: General requirements Section 2: Enamelled rectangular copper wireAmendment 1 (1999)Amendment 2 (2005)3 Defi nitions and general notes on meth

30、ods of test and appearance3.1 Defi nitions and general notes on methods of testFor defi nitions and general notes on methods of test, see Clause 3 of IEC 60317-0-2.In case of inconsistencies between IEC 60317-0-2 and this standard, IEC 60317-29 shall prevail.3.2 AppearanceSee Subclause 3.3 of IEC 60

31、317-0-2.#$#$Test requirements and procedures under consideration.#$BS EN 60317-29:1996+A2:2010EN 60317-29:1996+A2:2010 (E) BSI 2010420 Resistance to transformer oilTest under consideration.21 Loss of massTest inappropriate.22 Clause deleted30 PackagingSeeclause30 of IEC317-0-2.! “16 Resistance to re

32、frigerantsTest inappropriate.17 SolderabilityTest inappropriate.18 Heat or solvent bondingTest inappropriate.19 Dielectric dissipation factorTest inappropriate.23 Pin hole testTest inappropriate.#$15 Temperature indexSeeclause15 of IEC317-0-2, where the minimum temperature index shall be200.BS EN 60

33、317-29:1996+A2:2010EN 60317-29:1996+A2:2010 (E) BSI 20105Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the ed

34、ition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60317

35、-0-2 + A1 + A2 1997 1999 2005 Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire EN 60317-0-2 + A1 + A2 1998 2000 2005 BS EN 60317-29:1996+A2:2010EN 60317-29:1996+A2:2010 (E) BSI 2010BSI GroupHeadquarters 389 Chiswick High Road,

36、London, W4 4AL, UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 standardsBSI - British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal

37、 Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inacc

38、uracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which

39、 ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001 Email: You may also buy directly using a

40、 debit/credit card from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of informa

41、tion on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0

42、)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: In

43、formation regarding online access to British Standards via British Standards Online can be found at http:/ information about BSI is available on the BSI website at http:/ CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internat

44、ional standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This do

45、es not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager. Tel: +44 (0)20 8996 7070 Email: BS EN60317-29:1996+A2:2010