EN 50583-1-2016 en Photovoltaics in buildings - Part 1 BIPV modules.pdf

《EN 50583-1-2016 en Photovoltaics in buildings - Part 1 BIPV modules.pdf》由会员分享，可在线阅读，更多相关《EN 50583-1-2016 en Photovoltaics in buildings - Part 1 BIPV modules.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 50583-1:2016Photovoltaics in buildingsPart 1: BIPV modulesBS EN 50583-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50583-1:2016.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/82, Photovolt

2、aic Energy Systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Publish

3、ed by BSI Standards Limited 2016ISBN 978 0 580 79598 5ICS 27.160Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2016.Amendments/corrigenda issued since

4、publicationDate T e x t a f f e c t e dBS EN 50583-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50583-1 January 2016 ICS 27.160 English Version Photovoltaics in buildings - Part 1: BIPV modules lments photovoltaques dans la construction - Partie 1: Modules photovoltaques incorpors au b

5、ti Photovoltaik im Bauwesen - Teil 1: BIPV-Module This European Standard was approved by CENELEC on 2015-10-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any

6、 alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other lang

7、uage made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the

8、 Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Unite

9、d Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means re

10、served worldwide for CENELEC Members. Ref. No. EN 50583-1:2016 EBS EN 50583-1:2016EN 50583-1:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 6 4 Requirements . 7 4.1 General . 7 4.2 Electrical requirements . 8 4.3 Building-related requireme

11、nts . 8 4.3.1 General . 8 4.3.2 BIPV Modules containing glass panes 8 4.3.3 BIPV Modules not containing glass panes . 16 5 Labelling . 18 6 Documentation and declaration of performance . 18 6.1 Data sheet. 18 6.2 Declaration of conformity . 19 6.3 Further documentation . 19 Annex A (normative) Furth

12、er requirements on PV modules that contain glass . 20 A.1 General . 20 A.2 Mechanical requirements . 20 A.3 Energy economy requirements 20 Bibliography 22 BS EN 50583-1:2016 EN 50583-1:2016 (E) 3 European foreword This document (EN 50583-1:2016) has been prepared by CLC/TC 82 “Solar photovoltaic ene

13、rgy systems“. The following dates are fixed: latest date by which this document hasto be implemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2016-10-05 latest date by which the nationalstandards conflicting with thisdocument have to be withdrawn(dow) 2

14、018-10-05 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. BS EN 50583-1:2016EN 50583-1:2016 (E) 4 1 Scope This document applies to pho

15、tovoltaic modules used as construction products. It focuses on the properties of these photovoltaic modules relevant to essential building requirements as specified in the European Construction Product Regulation CPR 305/2011, and the applicable electro-technical requirements as stated in the Low Vo

16、ltage Directive 2006/95/EC / or CENELEC standards. This document references international standards, technical reports and guidelines. For some applications in addition national standards (or regulations) for building products may apply in individual countries, which are not explicitly referenced he

17、re and for which harmonized European Standards are not yet available. The document is addressed to manufacturers, planners, system designers, installers, testing institutes and building authorities. This document does not apply to concentrating or building-attached photovoltaic modules. 1This docume

18、nt addresses requirements on the PV modules in the specific ways they are intended to be mounted but not the mounting structure itself, which is within the scope of EN 50583-2. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are in

19、dispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 410, Glass in building Determination of luminous and solar characteristics of glazing EN 673, Glass in b

20、uilding Determination of thermal transmittance (U value) Calculation method EN 674, Glass in building Determination of thermal transmittance (U value) Guarded hot plate method EN 675, Glass in building Determination of thermal transmittance (U value) Heat flow meter method prEN 1279-5, Glass in buil

21、ding Insulating glass units Part 5: Evaluation of conformity EN 1990, Eurocode: Basis of structural design EN 1991 (all parts), Eurocode 1: Actions on structures EN 1993 (all parts), Eurocode 3: Design of steel structures EN 1999 (all parts), Eurocode 9: Design of aluminium structures EN 12179, Curt

22、ain walling Resistance to wind load Test method prEN 12488, Glass in buildings Glazing recommendations Assembly principles for vertical and sloping glazing EN 12519, Windows and pedestrian doors Terminology EN 12600, Glass in building Pendulum test Impact test method and classification for flat glas

23、s EN 12758, Glass in building Glazing and airborne sound insulation Product descriptions and determination of properties 1For the definition of building-attached photovoltaic modules refer to 3.2 BS EN 50583-1:2016 EN 50583-1:2016 (E) 5 EN 13022 (all parts), Glass in building Structural sealant glaz

24、ing EN 13116, Curtain walling Resistance to wind load Performance requirements EN 13119, Curtain walling Terminology EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13501-2, Fire classification of constru

25、ction products and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation services EN 13501-5, Fire classification of construction products and building elements Part 5: Classification using data from external fire exposure to roofs tests EN 13830, Curt

26、ain walling Product standard EN 13956, Flexible sheets for waterproofing Plastic and rubber sheets for roof waterproofing Definitions and characteristics EN 14351-1, Windows and doors Product standard, performance characteristics Part 1: Windows and external pedestrian doorsets without resistance to

27、 fire and/or smoke leakage characteristics EN 14449, Glass in building Laminated glass and laminated safety glass Evaluation of conformity/ Product standard EN 14500, Blinds and shutters Thermal and visual comfort Test and calculation methods EN 14782, Self-supporting metal sheet for roofing, extern

28、al cladding and internal lining Product specification and requirements EN 14783, Fully supported metal sheet and strip for roofing, external cladding and internal lining Product specification and requirements EN 15804, Sustainability of construction works Environmental product declarations Core rule

29、s for the product category of construction products CEN/TR 15941, Sustainability of construction works Environmental product declarations Methodology for selection and use of generic data EN 15942, Sustainability of construction works Environmental product declarations Communication format business-

30、to-business EN 15978, Sustainability of construction works Assessment of environmental performance of buildings Calculation method EN 16002, Flexible sheets for waterproofing Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing EN 50380, Datash

31、eet and nameplate information for photovoltaic modules EN 61082-1, Preparation of documents used in electrotechnology Part 1: Rules (IEC 61082-1) EN 61215, Crystalline silicon terrestrial photovoltaic (PV) modules Design qualification and type approval (IEC 61215) EN 61646, Thin-film terrestrial pho

32、tovoltaic (PV) modules Design qualification and type approval (IEC 61646) BS EN 50583-1:2016EN 50583-1:2016 (E) 6 EN 61730-1, Photovoltaic (PV) module safety qualification Part 1: Requirements for construction (IEC 61730-1) EN 61730-2, Photovoltaic (PV) module safety qualification Part 2: Requiremen

33、ts for testing (IEC 61730-2) CLC/TS 61836, Solar photovoltaic energy systems Terms, definitions, symbols (IEC/TS 61836) EN 62446, Grid connected photovoltaic systems Minimum requirements for system documentation, commissioning tests and inspection (IEC 62446) EN 82079-1, Preparation of instructions

34、for use Structuring, content and presentation Part 1: General principles and detailed requirements (IEC 82079-1) EN ISO 12543-1, Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts (ISO 12543-1) EN ISO 12543-2, Glass in building Laminat

35、ed glass and laminated safety glass Part 2: Laminated safety glass (ISO 12543-2) EN ISO 12543-3, Glass in building Laminated glass and laminated safety glass Part 3: Laminated glass (ISO 12543-3) EN ISO 12543-4, Glass in building Laminated glass and laminated safety glass Part 4: Test methods for du

36、rability (ISO 12543-4) EN ISO 12543-5, Glass in building Laminated glass and laminated safety glass Part 5: Dimensions and edge finishing (ISO 12543-5) EN ISO 12543-6, Glass in building Laminated glass and laminated safety glass Part 6: Appearance (ISO 12543-6) EN ISO 12631, Thermal performance of c

37、urtain walling Calculation of thermal transmittance (ISO 12631) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1990, EN ISO 12543 (Parts 1 to 6), EN 12519, EN 13119, EN 13956, EN 14782, EN 14783, CLC/TS 61836, EN 13022, EN 16002 and the following app

38、ly. Annex-specific definitions are included in the annexes themselves. NOTE Additional information are provided in the Low Voltage Directive 2006/95/EC, the Construction Product Regulation 305/2011 and the Electromagnetic Compatibility Directive ECD 2004/108/EC. 3.1 Building-Integrated Photovoltaic

39、modules BIPV modules photovoltaic modules are considered to be building-integrated, if the PV modules form a construction product providing a function as defined in the European Construction Product Regulation CPR 305/2011. Thus the BIPV module is a prerequisite for the integrity of the buildings fu

40、nctionality. If the integrated PV module is dismounted (in the case of structurally bonded modules, dismounting includes the adjacent construction product), the PV module would have to be replaced by an appropriate construction product. The buildings functions in the context of BIPV are one or more

41、of the following: mechanical rigidity or structural integrity primary weather impact protection: rain, snow, wind, hailBS EN 50583-1:2016 EN 50583-1:2016 (E) 7 energy economy, such as shading, daylighting, thermal insulation fire protection noise protection separation between indoor and outdoor envi

42、ronments security, shelter or safetyInherent electro-technical properties of PV such as antenna function, power generation and electromagnetic shielding etc. alone do not qualify PV modules as to be building-integrated. 3.2 Building-Attached Photovoltaic Modules BAPV modules photovoltaic modules are

43、 considered to be building-attached, if the PV modules are mounted on a building envelope and do not fulfil the above criteria for building integration (Negation: The integrity of the building functionality is independent of the existence of a building-attached photovoltaic module.) Note 1 to entry:

44、 Further important information on this type of photovoltaic system on roofs is provided by the Technical Report by CEN/TC 128/WG3 - Solar energy systems for roofs: Requirements for structural connections to solar panels. 4 Requirements 4.1 General As electrical components, BIPV modules are subject t

45、o the applicable electro-technical requirements as stated in the Low Voltage Directive 2006/95/EC / or CENELEC standards. The essential requirements defined in the LVD 2006/95/EC are: 1. Protection against hazards arising from the electrical equipment,2. Protection against hazards which may be cause

46、d by external influences on the electrical equipment.As construction products, BIPV modules are subject to the Essential Requirements as specified in the European Construction Product Regulation CPR 305/2011. The essential requirements defined in the CPR 305/2011 are: 3. Mechanical resistance and st

47、ability4. Safety in case of fire5 Hygiene, health and the environment 26 Safety and accessibility in use 7. Protection against noise8. Energy economy and heat retention9. Sustainable use of natural resources2As per Directive 2011/65/EU of the European parliament from 8th June 2011, photovoltaic modu

48、les have been exempted from the ROHS directive. BS EN 50583-1:2016EN 50583-1:2016 (E) 8 4.2 Electrical requirements The BIPV modules shall comply with one of the following electrical standards: EN 61215 for crystalline silicon terrestrial photovoltaic (PV) modules EN 61646 for thin-film terrestrial

49、photovoltaic (PV) modulesand in addition to EN 61730 for photovoltaic module safety qualificationNOTE The integration of an existing PV module, which already complies with the standards above, into a construction product to create a BIPV module may change the electrical properties with respect to the original PV module. New evaluation of the BIPV module with respect to a basic requirement of the LVD is necessary only if an e