EN 50566-2017 en Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to.pdf

《EN 50566-2017 en Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to.pdf》由会员分享，可在线阅读，更多相关《EN 50566-2017 en Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human b

2、odyBS EN 50566:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50566 October 2017 ICS 17.240; 33.070.01 Supersedes EN 50566:2013English Version Product standard to demonstrate the compliance of wireless communi

3、cation devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body Norme de produit pour dmontrer la conformit des dispositifs de

4、 communication sans fil aux restrictions de base et aux valeurs limites dexposition relatives lexposition des personnes aux champs lectromagntiques dans la plage de frquences de 30 MHz 6 GHz: dispositifstenus la main ou ports proximit immdiate du corps humain Produktnorm zum Nachweis der bereinstimm

5、ung von schnurlosen Kommunikationsgerten mit den Basisgrenzwerten und Expositionsgrenzwerten fr die Exposition von Personen gegenber elektromagnetischen Feldern im Frequenzbereich von 30 MHz bis 6 GHz: In enger Nachbarschaft zum menschlichen Krper handgehaltene und am Krper getragene Gerte This Euro

6、pean Standard was approved by CENELEC on 2017-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references

7、 concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENE

8、LEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

9、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical

10、Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 5

11、0566:2017 ENational forewordThis British Standard is the UK implementation of EN 50566:2017. It supersedes BS EN 50566:2013, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/106, Human exposure to low frequency and high frequency electromagnetic rad

12、iation.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI

13、 Standards Limited 2017ISBN 978 0 580 96861 7ICS 17.240; 33.070.01Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued si

14、nce publicationDate Text affectedBRITISH STANDARDBS EN 50566:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50566 October 2017 ICS 17.240; 33.070.01 Supersedes EN 50566:2013English Version Product standard to demonstrate the compliance of wireless communication devices with the basic restr

15、ictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body Norme de produit pour dmontrer la conformit des dispositifs de communication sans fil aux restric

16、tions de base et aux valeurs limites dexposition relatives lexposition des personnes aux champs lectromagntiques dans la plage de frquences de 30 MHz 6 GHz: dispositifstenus la main ou ports proximit immdiate du corps humain Produktnorm zum Nachweis der bereinstimmung von schnurlosen Kommunikationsg

17、erten mit den Basisgrenzwerten und Expositionsgrenzwerten fr die Exposition von Personen gegenber elektromagnetischen Feldern im Frequenzbereich von 30 MHz bis 6 GHz: In enger Nachbarschaft zum menschlichen Krper handgehaltene und am Krper getragene Gerte This European Standard was approved by CENEL

18、EC on 2017-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards

19、 may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language an

20、d notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ger

21、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de No

22、rmalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50566:2017 EBS EN 50566:2017EN 50566

23、:2017 (E) 2 Contents Page European foreword 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions 4 4 Exposure conditions 5 5 Normative limits 5 6 Evaluation of compliance 5 7 Assessment uncertainty 6 8 Documentation . 6 9 Assessment of compliance . 6 Annex ZZ (informative) Relationship b

24、etween this European standard and the essential requirements of Directive 2014/53/EU 2014 OJ L153 aimed to be covered . 7 Bibliography . 8 BS EN 50566:2017EN 50566:2017 (E) 3 European foreword This document (EN 50566:2017) has been prepared by CLC/TC 106X “Electromagnetic fields in the human environ

25、ment”. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-07-24 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2

26、020-07-24 This document supersedes EN 50566:2013. EN 50566:2017 includes the following significant technical changes with respect to EN 50566:2013: 1) the standard requires that the assessment has to take into account all reasonably foreseeable operating conditions (Clause 4); 2) the standard covers

27、 equipment intended for use only by workers as well as equipment intended for use by the general public and different limits are given for each case (Clause 5). This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and su

28、pports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. BS EN 50566:2017EN 50566:2017 (E) 4 1 Scope This product standard applies to wireless communication devices used at distances up to and in

29、cluding 200 mm from the human body, i.e. when held in the hand or in front of the face, mounted on the body, combined with other transmitting or non-transmitting devices or accessories (e.g. belt-clip, camera or Bluetooth add-on), or integrated into garments. The applicable frequency range is from 3

30、0 MHz to 6 GHz. The objective of this standard is to demonstrate the compliance of such devices with the basic restrictions and exposure limit values related to human exposure to radio frequency electromagnetic fields. For devices used next to the ear the applicable product standard is EN 50360:2017

31、 1. For low power devices the applicable product standard is EN 50663:2017 2. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated

32、references, the latest edition of the referenced document (including any amendments) applies. EN 62209-2:2010, Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Human models, instrumentation, and procedures Part 2: Procedure to determine the spec

33、ific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) (IEC 62209-2:2010) Council Recommendation 1999/519/EC of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 30

34、0 GHz) (Official Journal L 199, 30.6.1999, p. 59-70) Directive 2013/35/EU of the European Parliament and of the Council of 26 June 2013 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields) (20th individual

35、Directive within the meaning of Article 16(1) of Directive 89/391/EEC) and repealing Directive 2004/40/EC (Official Journal L 179, 29.6.2013, p. 121) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 basic restrictions restrictions on exposure

36、of the general public to electric, magnetic, and electromagnetic fields that are based directly on established health effects and biological considerations Note 1 to entry: Concerning the frequency range of this standard, the physical quantity used is the Specific Absorption Rate (SAR). 3.2 exposure

37、 limits values restrictions on exposure of workers to electric, magnetic and electromagnetic fields that are based directly on established health effects and biological considerations Note 1 to entry: Concerning the frequency range of this standard, the physical quantity used is the Specific Absorpt

38、ion Rate (SAR). BS EN 50566:2017EN 50566:2017 (E) 5 3.3 Specific Absorption Rate SAR time derivative of the incremental energy (dW) absorbed by (dissipated in) an incremental mass (dm) contained in a volume element (dV) of given mass density ( ) d dW d dWSARdt dm dt dV = = and expressed in units of

39、watt per kilogram (W/kg) Note 1 to entry: It is a physical quantity on which the basic restrictions of exposure protection guidelines are based in the frequency range specified in the scope. 3.4 wireless communication device equipment within the scope of this standard 3.5 worker person exposed to el

40、ectromagnetic fields under the conditions defined in Directive 2013/35/EU 4 Exposure conditions Equipment which meets the limits for general public exposure as given in this document (Clause 5) will automatically meet the limits for workers without further testing. Equipment which meets the limits f

41、or workers will not necessarily meet the limits for the general public and, unless intended only for workers use when at work, equipment shall also be tested against general public limits. Equipment intended only for use by workers when at work shall have this condition clearly identified in the use

42、r instructions. This use condition shall be identified in the test report. All intended operating conditions as well as the reasonably foreseeable conditions of human exposure from the equipment shall be taken into account in the evaluation. The reasonably foreseeable conditions of exposure should b

43、e based on realistic exposure and/or installation parameters representative of all readily-predictable human and system behaviour such as the duration of exposure, time variability of transmitted power, simultaneously operated frequency bands and time averaging as defined in normative limits. 5 Norm

44、ative limits For equipment intended for use by the general public the basic restrictions for localized SAR in Table 1 of Annex II of Council Recommendation 1999/519/EC, and the accompanying notes to that table, shall be applied. For equipment intended only for use by workers when at work, exposure l

45、imit values for localized SAR in Table A1 of Annex III of Directive 2013/35/EU, and the accompanying notes to that table, shall be applied. 6 Evaluation of compliance The SAR measurements to demonstrate equipment compliance shall be performed according to EN 62209-2:2010, Clauses 5 and 6. Device tes

46、t positions during SAR measurement to demonstrate equipment compliance shall be according to EN 62209-2:2010, 6.1.4 except that for body worn, body supported or garment integrated devices a separation distance of 5 mm or less shall be used. BS EN 50566:2017EN 50566:2017 (E) 6 Devices shall be evalua

47、ted with maximum available transmission power during testing. Where maximum power is based on hardware implemented time-averaged transmission power control algorithms, these shall be used. 7 Assessment uncertainty The uncertainty of the assessment shall be calculated and used for comparison with lim

48、its as defined in EN 62209-2:2010, Clause 7. 8 Documentation The measurement test shall be documented and reported according to EN 62209-2:2010, Clause 8. The rationale for any non-standardized test positions used in the measurements shall be included in the test report. Where time averaging or powe

49、r averaging has been accounted for in the testing then an explanation and rationale shall be included in the test report. 9 Assessment of compliance The wireless communication device is deemed to fulfil the requirements of this standard if all the measured values performed according to Clause 6, are less than or equal to the applicable exposure limits defined in Clause 5. BS EN 50566:2017EN 50566:2017 (E) 7 Annex ZZ (informative) Relationship between this European standard and the essential