EN 15741-2009 en Animal feeding stuffs - Determination of OC-pesticides and PCB-s by GC MS《牲畜饲料 用GC MS对OC杀虫剂和PCB的测定》.pdf

《EN 15741-2009 en Animal feeding stuffs - Determination of OC-pesticides and PCB-s by GC MS《牲畜饲料 用GC MS对OC杀虫剂和PCB的测定》.pdf》由会员分享，可在线阅读，更多相关《EN 15741-2009 en Animal feeding stuffs - Determination of OC-pesticides and PCB-s by GC MS《牲畜饲料 用GC MS对OC杀虫剂和PCB的测定》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 15741:2009ICS 65.120NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAnimal feeding stuffs Determination of OC-pesticides and PCBs by GC/MSThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July2009

2、BSI 2009ISBN 978 0 580 60511 6Amendments/corrigenda issued since publicationDate CommentsBS EN 15741:2009National forewordThis British Standard is the UK implementation of EN 15741:2009. The UK participation in its preparation was entrusted to TechnicalCommittee AW/10, Animal feeding stuffs.A list o

3、f organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obli

4、gations.BS EN 15741:2009EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15741February 2009ICS 65.120English VersionAnimal feeding stuffs - Determination of OC-pesticides andPCBs by GC/MSAliments des animaux - Dtermination des pesticidesorganochlors (OC) et des polychlorobiphnyles (PCB) parGC/MSFut

5、termittel - Bestimmung der OC-Pestizide und PCBsmittels GC/MS-VerfahrenThis European Standard was approved by CEN on 24 January 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national stan

6、dard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other l

7、anguage made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finla

8、nd,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE

9、 FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15741:2009: EBS EN 15741:2009EN 15741:2009 (E) 2 Contents Page Foreword . 3 1 Scope 4 2 Normative references 4 3 Ter

10、ms and definitions . 5 4 Principle 5 5 Reagents and materials 5 6 Apparatus . 10 7 Sampling . 13 8 Preparation of test sample . 13 9 Procedure . 13 10 Calculation and expression of results. 15 11 Precision . 18 12 Test report 20 13 Important considerations . 21 Annex A (informative) Results of inter

11、laboratory tests . 22 Annex B Description of PTV injection system (in case this is available). 23 Bibliography 25 BS EN 15741:2009EN 15741:2009 (E) 3 Foreword This document (EN 15741:2009) has been prepared by Technical Committee CEN/TC 327 “Animal feeding stuffs”, the secretariat of which is held b

12、y NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is drawn to the possibility that s

13、ome of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, a

14、nd supports essential requirements of EC Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fran

15、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15741:2009EN 15741:2009 (E) 4 1 Scope This European Standard specifies a gas chrom

16、atographic/mass spectrometric method for the determination of organochlorine pesticides (OCs) and polychlorinated biphenyls (PCBs) in animal feeding stuffs and oil. The method is applicable to animal feeding stuffs with a water content up to about 20 wt% and oil/fatty samples containing residues of

17、one or more of the following OCs and PCBs and some of their isomers and degradation products: Aldrin; Dieldrin; Chlordane (= sum of Chlordane isomers and Oxychlordane); DDT (= sum of isomers op-DDT, pp-DDT, pp-TDE (pp-DDD), and pp-DDE); Endosulfan (sum of -/-isomers and Endosulfan-sulphate); Endrin;

18、 Heptachlor (= sum of Heptachlor and -Heptachlorepoxide); Hexachlorobenzene (HCB); Hexachlorocyclohexane isomers -HCH (-BHC), -HCH (-BHC), -HCH (-BHC or lindane); PCB 28, 52, 101, 138, 153 and 180 (“Indicator PCBs”) and PCB 198, 209. The method is not yet applicable to Chlorocamphene (Toxaphene), a

19、complex mixture of polychlorinated camphenes. Chlorocamphene has a very distinctive chromatographic profile and is easily recognisable by GC/ECD. Positive identification of the toxaphene isomers can be performed by negative chemical ionisation mass spectrometry (NCI-MS), electron impact tandem mass

20、spectrometry (EI-MSxMS) or electron impact high resolution mass spectrometry (EI-HRMS) 1, which is not within the scope of this method. The limit of quantification for the mentioned organochlorine pesticides and PCBs is 5 ng/g in general. However, 10 ng/g applies for Heptachlor Aldrin, Endrin, Dield

21、rin, and Endosulfan (-, - and sulphate). Individual laboratories are responsible to ensure that the equipment they used will achieve these limits of quantifications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references

22、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6498, Animal feeding stuffs Preparation of test samples BS EN 15741:2009EN 15741:2009 (E) 5 3 Terms and definitions For the purpose of this document, the fo

23、llowing terms and definitions apply. 3.1 limit of detection smallest measured content, from which it is possible to deduce the presence of the analyte with reasonable statistical certainty NOTE The limit of detection is numerically equal to three times the standard deviation of the mean of blank det

24、erminations (n10). 3.2 limit of quantification lowest content of the analyte which can be measured with reasonable statistical certainty NOTE If both accuracy and precision are constant over a concentration range around the limit of detection, then the limit of quantification is numerically equal to

25、 6 times the standard deviation of the mean of blank determinations (n10). 3.3 feed Additives substances are feed additives when they comply with the definition of feed additives given in the Regulation 1831/2003 4 Principle A test portion of animal feeding stuff is fortified with internal standard

26、(PCB 198), and is extracted with ethylacetate. The extract is concentrated and subsequently purified by: Gel permeation chromatography (GPC), with cyclohexane/ethylacetate as eluting solvent chromatography on partially deactivated silica gel. The collected fraction containing the compounds of intere

27、st is concentrated and re-dissolved in a solution containing another internal standard (PCB 209) as a reference standard. After concentration an aliquot of the extract is injected into a GC-MS, using a splitless injector (an alternative here is PTV injection, see Note below). NOTE In case more sensi

28、tivity is necessary or less volume reduction is wanted, injection of a larger volume by PTV is possible (an example is described in Annex B). 5 Reagents and materials 5.1 General Use only reagents of recognized analytical grade and with a purity suitable for OC and PCB residue analysis. Check the pu

29、rity of the reagents by performing a blank test under the same conditions as used in the method. The chromatogram should not show any interfering impurity at the retention time of compounds of interest. WARNING The use of this European Standard can involve hazardous materials, operations and equipme

30、nt. This standard does not purport to address all the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. BS EN 15741:2009E

31、N 15741:2009 (E) 6 5.2 Ethylacetate 5.3 Cyclohexane 5.4 Ethylacetate/Cyclohexane = 1+1 parts by volume Mix 500 ml of ethylacetate (5.2) with 500 ml of cyclohexane (5.3) and mix thoroughly. Store at room temperature in a tightly closed glass bottle. 5.5 Hexane 5.6 Decane 5.7 Hexane/Decane = 95+5 part

32、 by volume Mix 950 ml of hexane (5.5) with 50 ml of decane (5.6) and mix thoroughly. Store at room temperature in a tightly closed glass bottle. 5.8 Iso-octane 5.9 Toluene 5.10 Silica gel, deactivated with 3,5% water Heat silica gel 60 (63m to 200m = 70 mesh to 230 mesh), at 130C for at least 5 h, a

33、llow to cool in a desiccator, and store in a tightly stopped container in the desiccator. To 96,5 g dried silica gel in a 300 ml Erlenmeyer flask with a ground joint, add 3,5 ml water dropwise from a burette, with continuous swirling. Immediately stopper the flask with a ground stopper and shake vig

34、orously for 5 min until all lumps have disappeared. Next shake for 2 h on a mechanical shaker, and then store in a tightly stoppered container. Deactivated silica gel is tenable during approximately 2 weeks if carefully stored. 5.11 Hexane/toluene = 3+7 parts by volume Mix 30 ml of n-hexane (5.5) wi

35、th 70 ml of toluene (5.9) and mix thoroughly. Store at room temperature in a tightly closed glass bottle. 5.12 Internal standard (PCB 209) 5.12.1 PCB 209 Stock solution 1, 100 g/ml Weigh 5-10 mg ( 0,01 mg) of PCB 209 (5.12) in a brown medicine glass bottle of 100 ml and add iso-octane (5.8) to achie

36、ve a concentration of 100 g/ml. Store the solution in a refrigerator at 4C ( 3C). The solution is tenable under these conditions during at least 5 years if the weight is carefully controled. Or use a commercially available standard solution of 100 g/ml. 5.12.2 PCB 209 Stock solution 2, 10,0 g/ml Dil

37、ute 10,0 ml of PCB 209 Stock solution 1 (5.12.1) to 100,0 ml with hexane (5.5). Store the solution in a refrigerator at 4C ( 3C). The solution is tenable under these conditions during at least 5 years if the weight is carefully controled. 5.12.3 PCB 209 Work solution, concentration 1 000 ng/ml Dilut

38、e 10 ml of PCB 209 Stock solution 2 (5.12.2) to 100,0 ml with hexane (5.5). Store the solution in a refrigerator at 4C ( 3C). The solution is tenable under these conditions during at least 5 years if the weight is carefully controled. BS EN 15741:2009EN 15741:2009 (E) 7 5.13 Internal standard (PCB 1

39、98) 5.13.1 PCB 198 Stock solution 1, 100 g/ml Weigh 5-10 mg ( 0,01 mg) of PCB 198 (5.13) in a brown medicine glass bottle of 100 ml and add iso-octane (5.8) to achieve a concentration of 100 g/ml. Store the solutions in a refrigerator at 4C ( 3C). The solutions are tenable under these conditions dur

40、ing at least 5 years if the weight is carefully controled. Or use a commercially available standard solution of 100 g/ml. 5.13.2 PCB 198 Stock solution 2, 5,0 g/ml Pipet 5,0 ml ofPCB 198 Stock solution 1 (5.13.1) to graduated flask of 100,0 ml with hexane (5.5). Store the solution in a refrigerator

41、at 4C ( 3C). The solution is tenable under these conditions during at least 5 years if the weight is carefully controled. 5.13.3 PCB 198 Work solution, 1 000 ng/ml Pipet 2,0 ml of the PCB 198 Stock solution 2 (5.13.2) into a 10,0 ml graduated flask and dilute with hexane (5.5) to 10,0 ml. Store the

42、solution in a refrigerator at 4C ( 3C). The solution is tenable under these conditions during at least 5 years if the weight is carefully controled. 5.14 PCB congeners Stock standard solution, 10 g/ml PCB 28 (2,4,4 trichlorobiphenyl); CAS Number: 7012-37-5 PCB 52 (2,2,5,5 tetrachlorobiphenyl); CAS N

43、umber: 35693-99-3 PCB 101 (2,2,4,5,5 pentachlorobiphenyl); CAS Number: 37680-73-2 PCB 138 (2,2,3,4,4,5 hexachlorobiphenyl); CAS Number: 35065-28-2 PCB 153 (2,2,4,4,5,5 hexachlorobiphenyl); CAS Number: 35065-27-1 PCB 180 (2,2,3,4,4,5,5 heptachlorobiphenyl); CAS Number: 35065-29-3 Or a Certified Mixtu

44、re at a concentration of 10 g/ml. 5.15 PCB congeners Work standard solution, 2,0 g/ml Dilute 2,0 ml of PCB congeners Stock standard solution (5.14) to 10,0 ml with hexane (5.5). Store the solution in a refrigerator at 4C ( 3C). The solution is tenable under these conditions during at least 5 years i

45、f the weight is carefully controled. 5.16 OC-pesticide reference standards, as follows: Each with a purity of not less than 99%. Aldrin (1R,4S,4aS,5S,8R,8aR)-1,2,3,4,10,10-hexachloro-1,4,4a,5,8,8a-hexahydro-1,4:5,8-imethanonaphthalene); CAS Number: 309-00-2 Dieldrin (1R,4S,4aS,5R,6R,7S,8S,8aR)-1,2,3

46、,4,10,10-hexachloro-1,4,4a,5,6,7,8,8a-octahydro-6,7epoxy-1,4:5,8-dimethanonaphthalene) CAS Number: 60-57-1 BS EN 15741:2009EN 15741:2009 (E) 8 Chlordane (1,2,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro-4,7-ethano-1H-indene); and isomer; CAS Numbers: 5103-71-9 and 5103-74-2 Oxychlordane (4,7-Metha

47、noindan, 1,2,4,5,6,7,8,8-octachloro-2,3-epoxy-3a,4,7,7a-tetrahydro-, exo,endo-); CAS Number: 27304-13-8 op-DDT o,p-(1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane) CAS Number: 789-02-6 pp-DDT p,p-(1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane) CAS Number: 50-29-3 pp-TDE (pp-DDD) p,p-1,1-dichloro-2,

48、2-bis(4-chlorophenyl) ethane CAS Number: 72-54-8 pp-DDE p,p-(1,1-dichloro-2,2-bis(4-chlorophenyl) ethylene) CAS Number: 72-55-9 Endosulfan (6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-6,9-methano-2,4,3-benzodioxathiepin 3-oxide); two stereoisomers, , (I), CAS Number: 959-98-8 and , (II) CAS Num

49、ber: 33213-65-9. Endosulfan-sulphate; CAS Number: 1031-07-8 Endrin (1R,4S,4aS,5S,6S,7R,8R,8aR)-1,2,3,4,10,10-hexachloro-1,4,4a,5,6,7,8,8a-octahydro-6,7-epoxy-1,4:5,8-dimethanonaphthalene CAS Number: 72-20-8 Heptachlor (1,4,5,6,7,8,8-heptachloro-3a,4,7,7a-tetrahydro-4,7-methanoindene) CAS Number: 76-44-8 -Heptachlorepoxide (1,4,5,6,7,8,8-heptachloro-3a,4,7,7a-tetrahydro-4,7-methanoindene(exo) CAS Number: 1024-57-3 HCB (hexachlorobenzene) CAS Number