EN 4670-2010 en Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D 300 mm《航空航天.pdf

《EN 4670-2010 en Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D 300 mm《航空航天.pdf》由会员分享，可在线阅读，更多相关《EN 4670-2010 en Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D 300 mm《航空航天.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 4670:2010Aerospace series Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) Vacuum induction melted and consumable electrode remelted Softened Forging stock a or D null 300 mmIncorpora

2、ting corrigendum July 2011BS EN 4670:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4670:2010. The UK participation in its preparation was entrusted to TechnicalCommittee ACE/61/-/15, Steels for Aerospace Purposes.A list of organizations represented on thi

3、s committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 74464 8ICS 49.025.10 Compliance with a British Standard cannot confer immunity fr

4、om legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2010.Amendments/corrigenda issued since publicationDate Text affected31 July 2011 Incorporating CEN corrected text January 2011EUROPEAN STANDARD NORME EUROPENNE

5、EUROPISCHE NORM EN 4670 December 2010 ICS 49.025.10 English Version Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D 300 mm Srie arospatiale - Acier FE-PM1507 (X1CrNiMoAlTi12-11-2) - labor sous vi

6、de par induction et refondu llectrode consommable - Adouci - Produits destins la forge - a ou D 300 mm Luft- und Raumfahrt - Stahl FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vakuuminduktionserschmolzen und mit Selbstverzehrender Elektrode umgeschmolzen - Weichgeglht - Schmiedevormaterial - a oder D 300 mmThi

7、s European Standard was approved by CEN on 2 July 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

8、 concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN memb

9、er into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

10、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Mar

11、nix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4670:2010: EEN 4670:2010 (E) 2 Contents Page Foreword 3Introduction . 41 Scope 52 Normative references 5BS EN 4670:2010EN 4670:2010 (E) 3 Foreword This do

12、cument (EN 4670:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Off

13、icial Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at

14、 the latest by June 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the natio

15、nal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

16、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 4670:2010EN 4670:2010 (E) 4 Introduction This European Standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series

17、is described in EN 4258. This standard has been prepared in accordance with EN 4500-3. BS EN 4670:2010EN 4670:2010 (E) 5 1 Scope This European Standard specifies the requirements relating to: Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) Vacuum induction melted and consumable electrode remelted Softened For

18、ging stock a or D 300 mm for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includin

19、g any amendments) applies. EN 2043, Aerospace series Metallic materials General requirements for semi-finished product qualification (excluding forgings and castings) 1)EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their

20、use EN 4500-3, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 3: Specific rules for heat resisting alloys 1)EN 4700-005, Aerospace series Steel and heat resisting alloys Wrought products Technical specification Part 005: Forging stock 1) 1) Publish

21、ed as ASD-STAN Prestandard at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). BS EN 4670:2010EN 4670:2010 (E) 6 1 Material designation FE-PM1507 (X1CrNiMoAlTi12-11-2) 2 Chemical composition % Element C

22、 Si Mn P S Cr Ni Mo Al Ti N2Fe min. 11,0 10,25 1,75 1,35 0,20 base max. 0,015 0,10 0,10 0,010 0,005 12,5 11,25 2,25 1,75 0,50 0,01 3 Method of melting Vacuum induction melted and consumable electrode remelted 4.1 Form Forgings 4.2 Method of production Forged from forging stock EN 4670 4.3 Limit dime

23、nsion(s) mm a or D 300 5 Technical specification EN 4700-005 6.1 Delivery condition Soltened Heat treatment 6.2 Delivery condition code U 7 Use condition Delivery condition Heat treatment Characteristics 8.1 Test sample(s) See EN 4700-005 Forged or machined 8.2 Test piece(s) See EN 4700-005 See EN 4

24、700-005 8.3 Heat treatment Delivery condition See line 29 9 Dimensions concerned mm a or D 300 a or D 75 a75 a or D 300 a10 Thickness of cladding on each face % 11 Direction of test piece L T 12 T Temperature C Ambient Ambient 13 Proof stress Rp0,2 MPa 1 520 1 520 14 Strength Rm MPa 1 650 1 650 15 E

25、longation A % 10 8 16 Reduction of area Z % 45 35 17 Hardness 363 HB 18 Shear strength Rc MPa 19 Bending k 20 Impact strength Notch direction T KV 15 J; ambient Notch direction L KV 10 J; ambient 21 C Temperature C 22 Time h 23 Stress a MPa 24 Elongation a % 25 Rupture stress R MPa 26 Elongation at

26、rupture A % 27 Notes (see line 98) aBS EN 4670:2010EN 4670:2010 (E) 7 29 Reference heat treatment Solution treated and precipitation treated 840 C 860 C / 2 h / WQ + Sub-zero to - 75 C / 8 h + 500 C 520C / t 8 h / AC 30 Microstructure 1EN 4700-005 2 One per cast 3 Corresponding to ingot top 7 The fe

27、rrite content shall not exceed 2 %. 44 External defects See EN 4700-005. 1 Visual50 Cleanliness / inclusion content (micro-cleanness) See EN 4700-005 7 Class Condition Severity 1 Freckles A2 White spots A 3 Radial segregation A4 Ring pattern B 61 Internal defects See EN 4700-005. 6 a or D 200 mm may

28、 be tested either on the product or at an earlier stage of manufacturing 7 Class 5 95 Marking inspection See EN 4700-005. 96 Dimensional inspection See EN 4700-005. 98 Notes a 75 mm a or D 100 mm may be tested in L or T direction. 99 Typical use BS EN 4670:2010EN 4670:2010 (E) 8 100 Product qualific

29、ation See EN 2043. Qualification programme to be agreed between manufacturer and purchaser. BS EN 4670:2010This page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents

30、the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendm

31、ent or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard wou

32、ld inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest e

33、ditions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed

34、 to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides

35、 a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 71

36、11 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001

37、Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardi

38、zation bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclu

39、de the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: