EN 4073-2016 en Aerospace series - Screws pan head hexalobular recess coarse tolerance shank medium length thread in alloy steel cadmium plated - Classification 1 100 MPa (at ambie.pdf

《EN 4073-2016 en Aerospace series - Screws pan head hexalobular recess coarse tolerance shank medium length thread in alloy steel cadmium plated - Classification 1 100 MPa (at ambie.pdf》由会员分享，可在线阅读，更多相关《EN 4073-2016 en Aerospace series - Screws pan head hexalobular recess coarse tolerance shank medium length thread in alloy steel cadmium plated - Classification 1 100 MPa (at ambie.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 4073:2016Aerospace series Screws,pan head, hexalobular recess,coarse tolerance shank,medium length thread, inalloy steel, cadmium plated Classification: 1 100 MPa (atambient temperature) / 235 CBS EN 4073:2016 BRITISH STANDARDNational forewordThis British Standard is t

2、he UK implementation of EN 4073:2016.It supersedes BS EN 4073:2009 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can beobtained on request to its s

3、ecretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 90478 3ICS 49.030.20Compliance with a British Standard canno

4、t confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 4073:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN

5、 4073 March 2016 ICS 49.030.20 Supersedes EN 4073:2009English Version Aerospace series - Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 C Srie arospatiale - Vis tte cylindri

6、que, empreinte six lobes, tige tolrance large, filetage moyen, en acier alli, cadmies - Classification: 1 100 MPa ( temprature ambiente) / 235 C Luft- und Raumfahrt - Flachkopfschrauben, mit Innensechsrund, mit mittlerer Gewindelnge, aus legiertem Stahl, verkadmet - Klasse: 1 100 MPa (bei Raumtemper

7、atur) / 235 C This European Standard was approved by CEN on 22 August 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and biblio

8、graphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsi

9、bility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republ

10、ic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALIS

11、ATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4073:2016 EBS EN 4073:2016EN 4073:2016 (E) 2 Contents Page European foreword

12、 . 3 1 Scope 4 2 Normative references 4 3 Required characteristics 5 4 Designation 8 5 Marking . 8 6 Technical specification 8 Annex A (normative) Standard evolution form. 9 BS EN 4073:2016EN 4073:2016 (E) 3 European foreword This document (EN 4073:2016) has been prepared by the Aerospace and Defenc

13、e Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to it

14、s presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2016, and conflicting national standards shall be withdrawn at the latest by September 2016. Attention is drawn to

15、the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4073:2009. According to the CEN-CENELEC Internal Regulations, the national stand

16、ards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu

17、xembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4073:2016EN 4073:2016 (E) 4 1 Scope This European Standard specifies the characteristics of screws, pan head, six lobe recess, coarse tolerance shank,

18、 medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa 1)/ 235 C 2). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appl

19、ies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2133, Aerospace series Cadmium plating of steels with specified tensile strength 1450 MPa, copper, copper alloys and nickel alloys EN 2424, Aerospace series Marking of aerospace products

20、 EN 3911, Aerospace series Six lobe recess Geometrical definition EN 9100, Quality Management Systems Requirements for Aviation, Space and Defense Organizations EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts ISO 3353-1, Aerospace Lead and ru

21、nout threads Part 1: Rolled external threads ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts ISO 7689, Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification ISO 7913, Aerospace Bolts and screws, metric Tolerances of for

22、m and position TR 3775, Aerospace series Bolts and pins Materials 3)1) Minimum tensile strength of the material at ambient temperature. 2) Maximum temperature that the screw can withstand without continuous change in its original characteristics, after return to ambient temperature. The maximum temp

23、erature is determined by the surface treatment. 3) Published as ASD-STAN Technical Report at the date of publication of this European Standard (http:/www.asd-stan.org/). BS EN 4073:2016EN 4073:2016 (E) 5 3 Required characteristics 3.1 Configuration Dimensions Masses See Figure 1 and Table 1. Dimensi

24、ons and tolerances are expressed in millimetres and apply after surface treatment. 3.2 Tolerances of form and position ISO 7913 and those specified in Figure 1 and Table 1. 3.3 Materials TR 3775: alloy steel, classification 1 100 MPa 3.4 Surface treatment EN 2133, thickness 8 m to 14 m, on all surfa

25、ces which can be contacted by a 20 mm diameter ball. On all other surfaces, a continuous deposit shall be present, but no value is specified. Black colour option: code B. BS EN 4073:2016EN 4073:2016 (E) 6 Dimensions in millimetres Key 1 Thread 2 Marking 3 Conforms to ISO 3353-1 4 Radius or chamfer 5

26、 Two holes optional (see Table 2) for diameter codes 030 and 040 6 Three holes optional (see Table 2) for diameter codes 050 to 120 7 L4= L1 + (L2) Figure 1 BS EN 4073:2016EN 4073:2016 (E) 7 Table 1 Diameter code Thread aD1D2D3D4D5D6D7E G h12 h13 nom. Tol. min. H13 max. H13 nom. Tol. 030 MJ3x0,5 - 4

27、h6h 3 5,5 2,3 0 0,5 5,07 1,0 3,4 1,5 + 0,2 0 0,3 040 MJ4x0,7 - 4h6h 4 7,0 3,0 6,53 5,2 1,1 2,0 0,4 050 MJ5x0,8 - 4h6h 5 8,5 3,4 0,5 8,03 5,8 1,5 2,5 0,5 060 MJ6x1 - 4h6h 6 10,0 4,2 9,38 1,4 6,3 3,0 + 0,3 0 0,6 080 MJ8x1 - 4h6h 8 13,0 6,2 12,33 8,9 1,9 4,0 0,8 100 MJ10x1,25 - 4h6h 10 16,0 7,9 15,33 1

28、,6 10,2 2,4 5,0 + 0,5 0 1,0 120 MJ12x1,25 - 4h6h 12 18,0 9,8 17,23 13,8 6,0 1,2 Diameter code H K L1 0,2 b,cL2L3R W Recess Mass dnom Tol. 0,1 Length code nom. max. min. EN 3911 code e f 030 3 h13 0,9 002 to 030 2 to 30 7,5 0,4 0,2 10 1,04 0,055 040 4 1,4 002 to 040 2 to 40 10,0 6,0 0,22 25 2,26 0,10

29、0 050 5 1,6 003 to 050 3 to 50 12,0 7,5 0,5 0,3 27 4,55 0,153 060 6 h14 2,0 003 to 060 3 to 60 14,0 8,5 0,7 0,5 30 6,95 0,222 080 8 2,4 004 to 080 4 to 80 16,5 10,5 0,22 45 15,44 0,395 100 10 005 to 100 5 to100 20,5 13,0 0,8 0,6 50 29,30 0,616 120 12 006 to 120 6 to120 22,5 14,5 0,9 55 43,10 0,887 a

30、In accordance with ISO 5855-2. bIncrements: 1 for L1 30; 2 for 30 100.cIf greater lengths are required, they shall be chosen using the above increments. The length code corresponds to the length L1, completed by one or two zeros to the left, where necessary, to obtain a three digit code.dApproximate

31、 values (kg/1 000 pieces), calculated on the basis of 7,85 kg/dm3, given for information purposes only. They apply to screws without holes.eValue for head and first L4.fIncrease for each additional millimetre of L4.BS EN 4073:2016EN 4073:2016 (E) 8 4 Designation EXAMPLE Description block SCREW Ident

32、ity block EN4073H050040B Number of this standard Hole code (see Table 2) Diameter code (see Table 1) Length code (see Table 1) Black colour code (see 3.4) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. Table 2 Holes Code Lockwire H Split pin D

33、 Lockwire and split pin C No hole (hyphen) 5 Marking See Table 3 and Figure 1. Table 3 Diameter code EN 2424 Style 030 and 040 N 050 to 120 B 6 Technical specification 6.1 General ISO 7689, with the following modifications. 6.2 Approval of manufacturers EN 9100. 6.3 Qualification of bolts EN 9133. B

34、S EN 4073:2016EN 4073:2016 (E) 9 Annex A (normative) Standard evolution form MODIFICATION REASON AND VALIDATION Current D6 dimensions for diameter codes 40, 50 and 80 are not achievable. Addition in normative references: EN 3911, Aerospace series Six lobe recess Geometrical definition There was no s

35、tandard for six lobe definition. L4is not defined and has no tolerance values. Keys 5 and 6 are none written on the drawing and linked with diameter range. Roughness symbol inside and above the drawing Add to all symbols: max. Modify symbols according to ISO 1302. e.g. Ra max. 3,2 Ra max. 0,8 Replac

36、e NAS code by EN code for EU applications This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards

37、and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and

38、expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on

39、standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including

40、British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range

41、 of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its availabl

42、e 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusiv

43、e to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standar

44、ds publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment o

45、r revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British

46、Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as per

47、mitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyr

48、ight & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW