EN 14118-1-2003 en Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 1 Designation《增强材料 玻璃丝毡(切短玻璃丝束和连续长丝毡片)规范 第1部分 名称》.pdf

《EN 14118-1-2003 en Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 1 Designation《增强材料 玻璃丝毡(切短玻璃丝束和连续长丝毡片)规范 第1部分 名称》.pdf》由会员分享，可在线阅读，更多相关《EN 14118-1-2003 en Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 1 Designation《增强材料 玻璃丝毡(切短玻璃丝束和连续长丝毡片)规范 第1部分 名称》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 14118-1:2003 Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 1: Designation The European Standard EN 14118-1:2003 has the status of a British Standard ICS 59.100.10 BS EN 14118-1:2003 This British Standard was published un

2、der the authority of the Standards Policy and Strategy Committee on 20 February 2003 BSI 20 February 2003 ISBN 0 580 41292 X National foreword This British Standard is the official English language version of EN 14118-1:2003. Together with BS EN 14118-2:2003 and BS EN 14118-3:2003 this publication s

3、upersedes BS 3496:1989 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetting plastics and prepregs, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to i

4、ts secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electroni

5、c Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to under

6、stand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprise

7、s a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUR

8、OPISCHENORM EN141181 February2003 ICS59.100.10 Englishversion ReinforcementSpecificationsfortextileglassmats(chopped strandandcontinuousfilamentmats)Part1:Designation RenfortSpcificationsdesmatsdeverretextile(mats filscoupsetmatsfilscontinus)Partie1:Dsignation VerstrkungsprodukteSpezifikationfrTexti

9、lglasmatten (GlasseidenundEndlosmatten)Teil1:Bezeichnung ThisEuropeanStandardwasapprovedbyCENon28November2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbib

10、liographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifie

11、dtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom.

12、 EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN141181:2003EEN141181:2003(E) 2 Contents page Foreword3 1

13、Scope 4 2 Normativereferences 4 3 Termsanddefinitions . 4 4 DesignationSystem 4 5 CodingExample .5EN141181:2003(E) 3 Foreword Thisdocument(EN141181:2003)hasbeenpreparedbyTechnicalCommitteeCEN/TC249 “Plastics“,thesecretariatofwhichisheldbyIBN. ThisEuropeanStandardshallbegiventhestatusofanationalstand

14、ard,eitherbypublicationofan identicaltextorbyendorsement,atthelatestbyAugust2003,andconflictingnationalstandardsshall bewithdrawnatthelatestbyAugust2003. ThisstandardisonepartofEN14118whichisstructuredasfollows: ReinforcementSpecificationsfortextileglassmats(choppedstrandandcontinuousfilament mats)P

15、art1:Designation ReinforcementSpecificationsfortextileglassmats(choppedstrandandcontinuousfilament mats)Part2:Methodsoftestandgeneralrequirements ReinforcementSpecificationsfortextileglassmats(choppedstrandandcontinuousfilament mats)Part3:Specificrequirements AccordingtotheCEN/CENELECInternalRegulat

16、ions,thenationalstandardsorganizationsofthe followingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,Czech Republic,Denmark,Finland,France,Germany,Greece,Hungary,Iceland,Ireland,Italy, Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,Switzerlandandthe UnitedKingdom

17、.EN141181:2003(E) 4 1Scope ThisEuropeanStandardestablishesamethodofdesignationforchoppedstrandandcontinuous filamentmatsmadefromtextileglassstrands,whichmaybeusedasthebasisforspecifications. Thisdesignationsystemisforchoppedstrandandcontinuousfilamentmatsusedforthe reinforcementofplasticsandhydrauli

18、cmatrices. Itdoesnotapplytomatsmadefromstaplefibres,nortomechanicalnorstitchedbondedmaterials nortoveils. Itisnotintendedtoimplythatmatshavingthesamedesignationgivenecessarilythesame performance.Noristhedesignationsystemintendedtocoverallthecharacteristicsofmats.This standarddoesnotgiveengineeringda

19、ta,performancedataordatawhichmayberequiredtospecify choppedstrandandcontinuousfilamentmatsforaparticularapplicationormethodofprocessing. Ifsuchadditionalpropertiesarerequiredtheyshallbedeterminedinaccordancewiththetest methodsspecifiedinEN141182. 2 Normativereferences ThisEuropeanStandardincorporate

20、sbydatedorundatedreference,provisionsfromother publications.Thesenormativereferencesarecitedattheappropriateplacesinthetextandthe publicationsarelistedhereafter.Fordatedreferences,subsequentamendmentstoorrevisionsof anyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitby amendme

21、ntorrevision.Forundatedreferencesthelatesteditionofthepublicationreferredtoapplies (includingamendments). ENISO472:2001, PlasticsVocabulary(ISO472:1999) . ISO3374, ReinforcementproductsMatsandfabricsDeterminationofmassperunitarea. 3 Termsanddefinitions ForthepurposesofthisEuropeanStandard,thetermsan

22、ddefinitionsgiveninENISO472:2001 apply. Ifapplicable,additionaltermsaredefinedinpart2ofthisstandard. 4Designation System 4.1General Thedesignationsystemfortextileglassmatsisbasedonthefollowingstandardisedpattern(see note). Designation IdentityBlock DescriptionBlock StandardNumber IndividualItemBlock

23、 (optional) Block DataBlock1 DataBlock2 DataBlock3EN141181:2003(E) 5 Itconsistsofadescriptionblock,anIdentityblockcomprisingtheEuropeanStandardnumberandan individualItemblock.ForunambiguouscodingtheindividualItemblockissubdividedintodatablocks comprisingthefollowinginformation: Datablock1:Identifica

24、tionoftheglassmattype; Datablock2:Designatoryproperties; Datablock3:Manufacturerscodeand/orbindertypeandanyotherrelevantinformation. Toensurelegibility: thedescriptionblockshallbeseparatedfromthestandardnumberbyacomma; thefirstcharacterinthefirstindividualitemblockshallbeadash; individualitemblockss

25、hallbeseparatedfromeachotherbyacomma; aspaceshallbeintroducedbetweenthepositionsintheblocks; ifadatablockisnotused,thisshallbeindicatedbytwocommas(,). NOTE ThisstandardisedpatternisamodificationoftheISOframetextadaptedtothedesignationofthese reinforcementproducts. 4.2 DataBlock1 Inthisdatablockthete

26、xtileglassmattypeisidentifiedbyitscode(CSMforChoppedStrandMator CFMContinuousFilamentMat). 4.3 DataBlock2 Inthisdatablockthedesignatorypropertiesaredefinedasfollows: position1,thenominalmassperunitarea,ing/m 2 ,accordingtoISO3374; position2,thenominalwidth,incm. 4.4 DataBlock3 Inthisdatablockthemanu

27、facturerscodeand/orbindertypeandalltheother relevantinformationis given. 5Coding Example A600g/m 2 ,130cmwidth,choppedstrandmatiscodedasfollows:EN141181:2003(E) 6 EuropeanStandard ENXXXX DataBlock1 Codeforchoppedstrandmat CSM DataBlock2 Massperunitarea Widthoftheroll 600130 DataBlock3 Manufacturersc

28、ode(s)incorporating allrelevantinformation 1234 Designation:ENXXXXCSM,600130,1234blankBS EN 14118-1:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards i

29、n Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our

30、 products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7

31、400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 899

32、6 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requ

33、ested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and servic

34、es. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Me

35、mbership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Co

36、pyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitte

37、d in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.