EN 14116-2012 en Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels (Incorporates Amendment A1 2014)《危险货物运输坦克 数字接口为液体燃料产品识别.pdf

《EN 14116-2012 en Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels (Incorporates Amendment A1 2014)《危险货物运输坦克 数字接口为液体燃料产品识别.pdf》由会员分享，可在线阅读，更多相关《EN 14116-2012 en Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels (Incorporates Amendment A1 2014)《危险货物运输坦克 数字接口为液体燃料产品识别.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 14116:2012Tanks for transport ofdangerous goods Digitalinterface for productrecognition devices for liquidfuelsBS EN 14116:2012+A1:2014BS EN 14116:2012+A1:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14116:2012+A1:2014. It

2、supersedes BS EN 14116:2012 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participat

3、ion in its preparation was entrusted to Technical Committee AUE/18, Tanks for the transport of dangerous goods.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Us

4、ers are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 84966 4ICS 13.300; 23.020.20; 35.240.60; 43.080.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was

5、published under the authority of the Standards Policy and Strategy Committee on 31 October 2012.Amendments/corrigenda issued since publicationDate Text affected31 October 2014 Implementation of CEN amendment A1:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14116:2012+A1 September 2014 ICS

6、 13.300; 23.020.20; 35.240.60 Supersedes EN 14116:2012English Version Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels Citernes destines au transport de matires dangereuses -Interface numrique du dispositif de reconnaissance de produits ptro

7、liers Tanks fr die Befrderung gefhrlicher Gter - Digitale Schnittstelle fr das Produkterkennungssystem fr flssige Kraft- und Brennstoffe This European Standard was approved by CEN on 1 September 2012 and includes Amendment 1 approved by CEN on 7 August 2014. CEN members are bound to comply with the

8、CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management

9、Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

10、 the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net

11、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All r

12、ights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14116:2012+A1:2014 EEN 14116:2012+A1:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviations 6 3.1 Terms and definitions .

13、6 3.2 Abbreviations .7 4 Functions 8 5 Design characteristics 9 5.1 General 9 5.2 Temperature range . 10 5.3 Materials of construction . 10 5.4 PRD 10 5.5 PID 11 5.5.1 General specification . 11 5.5.2 Diode and ESD protection . 12 5.6 Contact and insulation resistances 13 5.7 Electrical requirements

14、 for hoses . 13 5.8 System architecture of MultiPID 14 5.9 Electrical design characteristic of MultiPID . 14 5.9.1 Technical description of MultiPID . 14 5.9.2 Modulation for the bi-directional communication . 16 5.9.3 Message timing . 17 6 Protocol structure . 18 6.1 Telegram transmission sequences

15、 . 18 6.2 Bit coding 19 6.3 Byte frame . 20 6.4 Byte sequence in multibyte variables 20 6.5 Telegram 20 6.6 Message format . 20 6.6.1 Format of messages #1 to #32 20 6.6.2 Format of messages #33 to #255 21 6.7 Message specification 21 6.7.1 Reserved messages . 21 6.7.2 Other messages 21 6.7.3 Messag

16、e #1: Product description and overfill status (depot/station to truck) . 21 6.7.4 Message #2 Location and product details (depot/station to truck) . 23 6.7.5 Message #3 Multi product loading arm (depot to truck) . 25 6.7.6 Message #4 Tank properties (station to truck) 26 6.7.7 Message #5 Rack meter

17、information (depot to truck) . 26 6.7.8 Message #6 Loading information (truck to depot) 27 6.7.9 Message #7 Delivery information (truck to station) 28 6.7.10 Message #8 Station information (station to truck) 29 6.7.11 Message #9 Acknowledge (depot to truck) 30 6.7.12 Message #10 Return product infor

18、mation (truck to return station) . 30 6.7.13 Message #32 CRC 16 30 7 Tests . 31 BS EN 14116:2012+A1:2014EN 14116:2012+A1:2014 (E)EN 14116:2012+A1:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviations 6 3.1 Terms and definitions

19、.6 3.2 Abbreviations .7 4 Functions 8 5 Design characteristics 9 5.1 General 9 5.2 Temperature range . 10 5.3 Materials of construction . 10 5.4 PRD 10 5.5 PID 11 5.5.1 General specification . 11 5.5.2 Diode and ESD protection . 12 5.6 Contact and insulation resistances 13 5.7 Electrical requirement

20、s for hoses . 13 5.8 System architecture of MultiPID 14 5.9 Electrical design characteristic of MultiPID . 14 5.9.1 Technical description of MultiPID . 14 5.9.2 Modulation for the bi-directional communication . 16 5.9.3 Message timing . 17 6 Protocol structure . 18 6.1 Telegram transmission sequence

21、s . 18 6.2 Bit coding 19 6.3 Byte frame . 20 6.4 Byte sequence in multibyte variables 20 6.5 Telegram 20 6.6 Message format . 20 6.6.1 Format of messages #1 to #32 20 6.6.2 Format of messages #33 to #255 21 6.7 Message specification 21 6.7.1 Reserved messages . 21 6.7.2 Other messages 21 6.7.3 Messa

22、ge #1: Product description and overfill status (depot/station to truck) . 21 6.7.4 Message #2 Location and product details (depot/station to truck) . 23 6.7.5 Message #3 Multi product loading arm (depot to truck) . 25 6.7.6 Message #4 Tank properties (station to truck) 26 6.7.7 Message #5 Rack meter

23、 information (depot to truck) . 26 6.7.8 Message #6 Loading information (truck to depot) 27 6.7.9 Message #7 Delivery information (truck to station) 28 6.7.10 Message #8 Station information (station to truck) 29 6.7.11 Message #9 Acknowledge (depot to truck) 30 6.7.12 Message #10 Return product info

24、rmation (truck to return station) . 30 6.7.13 Message #32 CRC 16 30 7 Tests . 31 EN 14116:2012+A1:2014 (E) 3 7.1 Type test . 31 7.1.1 General . 31 7.1.2 PID . 31 7.1.3 PRD function test 34 7.1.4 Test results 36 7.2 Production test 36 7.2.1 General . 36 7.2.2 PID static test . 36 7.2.3 PID function t

25、est 36 7.2.4 PRD function test 36 7.2.5 Test results 36 8 Marking . 37 9 Installation, operating and maintenance recommendations 37 Annex A (informative) Manufacturer ID 38 Annex B (normative) Calculation algorithm for CRC 16 . 39 Annex C (informative) A-deviations 40 Annex D (normative) Company cod

26、e 41 D.1 Reason for the company code . 41 D.2 Host of the list 41 D.3 Website . 41 D.4 Rules . 41 D.4.1 General . 41 D.4.2 Preliminary registration 41 D.4.3 Access to “Oil Company code” table 41 D.4.4 Registration of a new company code 41 D.4.5 Automatic notification of changes 42 Bibliography 43 BS

27、 EN 14116:2012+A1:2014EN 14116:2012+A1:2014 (E)EN 14116:2012+A1:2014 (E) 4 Foreword This document (EN 14116:2012+A1:2014) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the

28、 status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2015, and conflicting national standards shall be withdrawn at the latest by March 2015. Attention is drawn to the possibility that some of the elements of this document may be the su

29、bject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 14116:2012“. This document includes Amendment 1 approved by CEN on 2014-08-07. The start and finish of text introduced or altered by amendment is indic

30、ated in the text by tags !“. !deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former

31、 Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14116:2012+A1:2014EN 14116:2012+A1:20

32、14 (E)EN 14116:2012+A1:2014 (E) 4 Foreword This document (EN 14116:2012+A1:2014) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by

33、 publication of an identical text or by endorsement, at the latest by March 2015, and conflicting national standards shall be withdrawn at the latest by March 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELE

34、C shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 14116:2012“. This document includes Amendment 1 approved by CEN on 2014-08-07. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. !deleted tex

35、t“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

36、Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 14116:2012+A1:2014 (E) 5 Introduction Product recognition, the subject of this Eu

37、ropean Standard, is the digital interface that allows product data and/or other information to be transferred between transport tanks and other installations. The European Committee for Standardisation (CEN) draws attention to the fact that it is claimed that compliance with this document may involv

38、e the use of a patent concerning hose communication methods given in Clause 4. CEN takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the CEN that he is willing to negotiate licences either free of charge or under reasonabl

39、e and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with CEN. Information may be obtained from: FMC Technologies F.A. Sening GmbH Regentstrasse 1 D-25474 Ellerbek Germany Phone: +49-4101 3

40、04-0 Fax: +49-4101-304-133 / 255 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. CEN shall not be held responsible for identifying any or all such patent rights. CEN (http:/www.cen.eu/cen/WorkArea

41、/IPR/Pages/default.aspx) and CENELEC (http:/www.cenelec.eu/membersandexperts/toolsandapplications/index.html ) maintain on-line lists of patents relevant to their standards. Users are encouraged to consult the lists for the most up to date information concerning patents. BS EN 14116:2012+A1:2014EN 1

42、4116:2012+A1:2014 (E)EN 14116:2012+A1:2014 (E) 6 1 Scope This European Standard covers the digital interface at the product loading and/or discharge coupling which is used for the transfer of product related information and specifies the performance requirements, critical safety aspects and tests to

43、 provide compatibility of devices. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refer

44、enced document (including any amendments) applies. EN 13616:2004, Overfill prevention devices for static tanks for liquid petroleum fuels EN 15208, Tanks for transport of dangerous goods Sealed parcel delivery systems Working principles and interface specifications EN 60079-0, Explosive atmospheres

45、Part 0: Equipment General requirements (IEC 60079-0) EN 60079-11, Explosive atmospheres Part 11: Equipment protection by intrinsic safety “i“ (IEC 60079-11) ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot

46、inspection ISO 8601, Data elements and interchange formats Information interchange Representation of dates and times 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 message defined data set 3.1.2 tel

47、egram frame that contains at least one standardised message 3.1.3 maximum input voltage Uiaccording to EN 60079-11 3.1.4 maximum output voltage U0according to EN 60079-11 BS EN 14116:2012+A1:2014EN 14116:2012+A1:2014 (E)EN 14116:2012+A1:2014 (E) 6 1 Scope This European Standard covers the digital in

48、terface at the product loading and/or discharge coupling which is used for the transfer of product related information and specifies the performance requirements, critical safety aspects and tests to provide compatibility of devices. 2 Normative references The following documents, in whole or in par

49、t, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13616:2004, Overfill prevention devices for static tanks for liquid petroleum fuels EN 15208, Tanks for transport of dangerous goods Sealed parcel delivery systems Working principles and interface specifications EN 60079-0, Explosive atmospheres Part 0: Equipment General requirements (IEC 600