EN 13880-9-2003 en Hot applied joint sealants - Part 9 Test method for the determination of compatibility with asphalt pavements《热接合密封剂 第9部分 与沥青路面兼容性测定的试验方法》.pdf

《EN 13880-9-2003 en Hot applied joint sealants - Part 9 Test method for the determination of compatibility with asphalt pavements《热接合密封剂 第9部分 与沥青路面兼容性测定的试验方法》.pdf》由会员分享，可在线阅读，更多相关《EN 13880-9-2003 en Hot applied joint sealants - Part 9 Test method for the determination of compatibility with asphalt pavements《热接合密封剂 第9部分 与沥青路面兼容性测定的试验方法》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13880-9:2003 Hot applied joint sealants Part 9: Test method for the determination of compatibility with asphalt pavements The European Standard EN 13880-9:2003 has the status of a British Standard ICS 93.080.20 BS EN 13880-9:2003 This British Standard, was published under the

2、authority of the Standards Policy and Strategy Committee on 18 June 2003 BSI 18 June 2003 ISBN 0 580 42098 1 National foreword This British Standard is the official English language version of EN 13880-9:2003. The UK participation in its preparation was entrusted by Technical Committee B/510, Road m

3、aterials, to Subcommittee B/510/3, Materials for concrete roads, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referr

4、ed to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisi

5、ons of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, o

6、r proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. Th

7、e BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN138809 June2003 ICS93.080.20 Englishversion HotappliedjointsealantsPart9:Testmethodforthe determinat

8、ionofcompatibilitywithasphaltpavements ProduitsdescellementdejointsappliquschaudPartie 9:Mthodedessaipourladterminationdelacompatibilit aveclesrevtementsbitumineux HeiverarbeitbareFugenmassenTeil9:Prfverfahren zurBestimmungderVertrglichkeitmitAsphalten ThisEuropeanStandardwasapprovedbyCENon25March20

9、03. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoa

10、nyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAus

11、tria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCent

12、re:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN138809:2003EEN138809:2003(E) 2 Contents page Foreword3 1 Scope 4 2 Normativereferences 4 3 Principle4 4 Apparatus .4 5 Preparationandconditioningofthetestspecimens

13、.4 6 Procedure .5 7 Expressionofresults . .5 8 Precision.5 9 Testreport . .5 AnnexA (informative) Determinationofasphaltcompatibilityafterheatdegradation6 A.1 Principle6 A.2 Apparatus .6 A.3 Preparationandconditioningoftestspecimens .6EN138809:2003(E) 3 Foreword Thisdocument(EN138809:2003)hasbeenpre

14、paredbyTechnicalCommitteeCEN/TC227“Roadmaterials“,the secretariatofwhichisheldbyDIN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyDecember2003,andconflictingnationalstandardsshallbewithdrawnatthelatest byMarch2005. Thi

15、sEuropeanStandardisoneofaseriesofstandardsaslistedbelow: prEN138801 HotappliedjointsealantsPart1:Testmethodforthedeterminationofdensityat25C prEN138802 HotappliedjointsealantsPart2:Testmethodforthedeterminationofconepenetrationat 25C EN138803 HotappliedjointsealantsPart3:Testmethodforthedeterminatio

16、nofpenetrationand recovery(resilience) EN138804 HotappliedjointsealantsPart4:Testmethodforthedeterminationofheatresistance Changeinpenetrationvalue prEN138805 HotappliedjointsealantsPart5:Testmethodforthedeterminationofflowresistance prEN138806 HotappliedjointsealantsPart6:Testmethodforthepreparatio

17、nofsamplesfortesting prEN138807 HotappliedjointsealantsPart7:Functiontestingofjointsealants prEN138808 HotappliedjointsealantsPart8:Testmethodforthedeterminationofthechangeinweight offuelresistancejointsealantsafterfuelimmersion EN138809 HotappliedjointsealantsPart9:Testmethodforthedeterminationofco

18、mpatibilitywith asphaltpavements prEN1388010 HotappliedjointsealantsPart10:Testmethodforthedeterminationofadhesionand cohesionfollowingcontinuousextensionandcompression EN1388011 HotappliedjointsealantsPart11:Testmethodforthepreparationofasphalttestblocks usedinthefunctiontestandforthedeterminationo

19、fcompatibilitywithasphaltpavement s prEN1388012 HotappliedjointsealantsPart12:Testmethodforthemanufactureofconcretetestblocks forbondtesting(recipemethods) prEN1388013 HotappliedjointsealantsPart13:Testmethodforthedeterminationofthediscontinuous extension(adherencetest) AnnexAisinformative. Accordin

20、gtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal, Slovakia,Spain,Sweden

21、,SwitzerlandandtheUnitedKingdom.EN138809:2003(E) 4 1Scope 2 ThisEuropeanStandarddescribesamethodfordeterminingthecompatibilityofhot appliedjointsealantsappliedtoasawasphaltjointslot.Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.These no

22、rmativereferencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe publicationre

23、ferredtoapplies(includingamendments). prEN138806, HotappliedjointsealantsPart6:Testmethodforthepreparationofsamplesfortesting. EN1388011:2003, HotappliedjointsealantsPart11:Testmethodforthepreparationofasphalttestblocks usedinthefunctiontestandforthedeterminationofcompatibilitywithasphaltpavements.

24、prEN141881, JointfillersandsealantsPart1:Specificationsforhotappliedsealants. ISO188, Rubber,vulcanizedorthermoplasticAcceleratedageingandheatresistancetests. 3Principle Asphaltcompatibilityisdeterminedbyexaminingtheappliedsealantforadhesionandcohesionfailureorthe formationofanyoilexudateorsoftening

25、betweenthesealantandasphaltspecimenfollowingtheperiodof conditioningspecified. 4Apparatus 4.1 Powerdrivenmasonrysaw (othersawsthanapowerdrivenmasonrysawaresuitable). 4.2 Stiffbristlebrush . 4.3 Clothbackedadhesivetape ; 4.4 Fancirculatedoven accordingtoISO188,capableofmaintainingatemperatureof(60 3)

26、Cfor72h. 4.5 Knife. 5 Preparationandconditioningofthetestspecimens 5.1 UsetwoasphalttestblocksinaccordancewithEN 1388011:2003,8.2. 5.2 Cutagroove100mmlong,(13,0 3,2)mm wide and (19,0 3,2)mmdeepinthetopsurfaceofeach asphalttestblockbywetsawingwithapowerdrivenmasonrysaw(see4.1). 5.3 Scrubthegroovesthu

27、sformedwithastiffbristlebrush(see4.2)whileholdingthespecimensunderrunning watertoremoveallresidualfromsawing. 5.4 Allowthespecimenstodryandreturntoroomtemperatureafterwhichsecurelywrapthemwithclothbacked adhesivetape,orotherwisereinforcetopreventslumpingorcollapseduringthetestperiod.EN138809:2003(E)

28、 5 6Procedure 6.1 PreparetwotestspecimensaccordingtoprEN138806. 6.2 Caulktheendsofthegroovestopreventleakingandpouraportionofthelaboratorysampleofjointsealant intothegroovesfillingthemtoslightexcess.Donotallowthesealanttooverflowontothesurfaceofthespecimen adjacenttothegrooves. 6.3 Afterthejointseal

29、anthascooledtoroomtemperature,removeanyoverfillwithaheatedknife(see4.5)so thatthesurfaceofthesealantislevelwiththatoftheasphaltspecimen. 6.4 Placetheasphaltspecimensinafancirculatedoven(see4.4)maintainedatatemperatureof(60 3)Cfor aperiodof(72 1)h.Inspectthespecimenatleastonceeachdaytopreventslumping

30、orcollapseduringthetest period. 6.5 Afterthetestperiod,removetheasphaltspecimensfromthefancirculatedoven(see4.4)andimmediately examinethemforincompatibilityofthejointsealantwiththespecimen. 7 Expressionofresults Reportanyevidenceofadhesionandcohesionfailureortheformationofanoilyexudateorsofteningbet

31、weenthe sealantandasphaltspecimensaccordingtoprEN141881. 8Precision Estimatesoftherepeatabilityandreproducibilityofthistestmethodarenotavailableyetbutwillbeincludedby amendmentswhenavailable. 9 Testreport ThetestreportshallconfirmthatthetestwascarriedoutinaccordancewiththisEuropeanStandardandshall i

32、ncludethefollowinginformation: a) nameofsample; b) sourceofsample; c) batchnumberanddateofmanufacturerwhereappropriateorexpirydate; d) dateoftestingandresultsobtained; e) nameoftheanalystandtestlaboratory.EN138809:2003(E) 6 Annex A (informative) Determinationofasphaltcompatibilityafterheatdegradatio

33、n A.1Principle Thepurposeofthistestistoverifythejointsealantscompatibilitywiththeasphaltspecimenfollowingprolonged heating. A.2Apparatus Theapparatusshallbeusedasdescribedinclause4. A.3 Preparationandconditioningoftestspecimens Usetwoasphalttestblocksinaccordancewith5.1. Preparetwotestspecimensofjoi

34、ntsealantinaccordancewith6.2and6.3exceptthattheheatingperiodshallbe extendedto6hatthemanufacturersmaximumrecommendedsafeheatingtemperature.blankBS EN 13880-9:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing

35、 British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. I

36、t is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside fr

37、ont cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications sh

38、ould be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have

39、been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also a

40、vailable which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of sta

41、ndards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about

42、 BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may

43、 be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, a

44、nd size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.