EN 13880-8-2003 en Hot applied joint sealants Part 8 Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion《热接合密封剂 第8部分 浸入.pdf

《EN 13880-8-2003 en Hot applied joint sealants Part 8 Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion《热接合密封剂 第8部分 浸入.pdf》由会员分享，可在线阅读，更多相关《EN 13880-8-2003 en Hot applied joint sealants Part 8 Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion《热接合密封剂 第8部分 浸入.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13880-8:2003 Hot applied joint sealants Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion The European Standard EN 13880-8:2003 has the status of a British Standard ICS 93.080.20 BS EN 13880-8:2003 This Bri

2、tish Standard, was published under the authority of the Standards Policy and Strategy Committee on 29 August 2003 BSI 29 August 2003 ISBN 0 580 42532 0 National foreword This British Standard is the official English language version of EN 13880-8:2003. The UK participation in its preparation was ent

3、rusted by Technical Committee B/510, Road materials, to Subcommittee B/510/3, Materials for concrete roads, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement in

4、ternational or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not p

5、urport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European commi

6、ttee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6

7、, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN138808 August2003 ICS93.080.20 Englishversion Hotapplie

8、djointsealantsPart8:Testmethodforthe determinationofthechangeinweightoffuelresistancejoint sealantsafterfuelimmersion ProduitsdescellementdejointsappliquschaudPartie 8:Mthodedessaipourladterminationdelavariationde masseaprsimmersiondematiresdescellement rsistantesauxhydrocarbures HeiverarbeitbareFug

9、enmassenTeil8:Prfverfahren zurBestimmungderGewichtsnderungnach Treibstofflagerung ThisEuropeanStandardwasapprovedbyCENon2May2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.

10、Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsow

11、nlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,Switzerland

12、andUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN138808:2003EEN138808:2003(E) 2 Content

13、s page Foreword3 1 Scope 3 2 Normativereferences 4 3 Termsanddefinitions. .4 4 Principle4 5 Apparatus .4 6 Preparationandconditioningoftestspecimens .5 7 Procedure .5 8 Calculationandexpressionofresults. 5 9 Precision.5 10 Testreport 6EN138808:2003(E) 3 Foreword ThisdocumentEN138808:2003hasbeenprepa

14、redbyTechnicalCommitteeCEN/TC227“Roadmaterials”,the secretariatofwhichisheldbyDIN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestby February2004 ,andconflictingnationalstandardsshallbewithdrawnatthelatest by March2005 . A

15、ccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal, Slovakia,Spain

16、,Sweden,SwitzerlandandtheUnitedKingdom. ThisEuropeanStandardisoneofaseriesofstandardsaslistedbelow: EN138801, HotappliedjointsealantsPart1:Testmethodforthedeterminationofdensityat25C EN138802, HotappliedjointsealantsPart2:Testmethodforthedeterminationofconepenetrationat25C. EN138803, Hotappliedjoint

17、sealantsPart3:Testmethodforthedeterminationofpenetrationandrecovery (resilience). EN138804, HotappliedjointselantsPart4:TestmethodforthedeterminationofheatresistanceChangein penetrationvalue. EN138805, HotappliedjointsealantsPart5:Testmethodforthedeterminationofflowresistance. prEN138806, Hotapplied

18、jointsealantsPart6:Testmethodforthepreparationofsamplesfortesting. EN138807, HotappliedjointsealantsPart7:Functiontestingofjointsealants. EN138808, HotappliedjointsealantsPart8:Testmethodforthedeterminationofthechangeinweightoffuel resistancejointsealantsafterfuelimmersion. EN138809, Hotappliedjoint

19、sealantsPart9:Testmethodforthedeterminationofcompatibilitywithasphalt pavements. EN1388010, HotappliedjointsealantsPart10:Testmethodforthedeterminationofadhesionandcohesion followingcontinuousextensionandcompression. EN1388011, HotappliedjointsealantsPart11:Testmethodforthepreparationofasphalttestbl

20、ocksusedin thefunctiontestandforthedeterminationofcompatibilitywithasphaltpavements. EN1388012, HotappliedjointsealantsPart12:Testmethodforthemanufactureofconcretetestblocksfor bondtesting(recipemethods). EN1388013, HotappliedjointsealantsPart13:Testmethodforthedeterminationofthediscontinuous extens

21、ion(adherencetest). 1Scope ThisEuropeanStandarddescribesamethodfordeterminingthejointsealantresistancetofuelspillageby calculatingthechangeinmass,afterimmersioninthestandardreferencefuel.EN138808:2003(E) 4 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfrom

22、otherpublications.These normativereferencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatest

23、editionofthe publicationreferredtoapplies(includingamendments). EN138802 ,HotappliedjointsealantsPart2:Testmethodforthedeterminationofconepenetrationat25C. prEN138806:2003, HotappliedjointsealantsPart6:Testmethodforthepreparationofsamplesfortesting. prEN141881:2001, JointfillerandsealantsPart1:Speci

24、ficationsforhotappliedsealants. 3 Termsanddefinitions ForthepurposesofthisEuropeanStandard,thetermsanddefinitionsgiveninprEN 141881:2001and prEN138806:2003apply. 4Principle Thechangeinmassoffuelresistanttypesealantsismeasuredtoverifytheydonotdeterioratetoanunacceptable degreeasaresultofcontactwithsp

25、iltfuel. Atestspecimenisweighedandthenplacedinasmallcontainertogetherwiththestandardtestfuel.Thisassembly isthenconditionedinawaterbathforaperiodoftime,afterwhichthespecimenisremovedfromthesmall container,driedandreweighed.Thechangeinmassiscalculatedandreportedaccordingly. 5Apparatus 5.1 Laboratoryb

26、alance ,capableofweighingupto400gofsampletoanaccuracyof0,01g. 5.2 Controlledenvironment,capableofmaintainingthepreparedspecimenandfuelimmersioncontainersat (23 2)C. 5.3 Metalcontainer ,consistingofasampletininwhichthespecimenistested,cylindricalinshapeandhaving aflatbottomwithacapacityofapproximatel

27、y100ml.Theinsidedimensionsarenominally56mmindiameterand 35mmindepth.Tofacilitatepouringtherightamountofmaterials,amarkismadeatadepthofapproximately 30mm. 5.4 Smallcontainer,manufacturedfrom1mmmetalsheetwithnominalinternaldimensionsof150 mm 150mm150mmdeepwithacloselyfittinglidwhichcanbesealedwithadhe

28、sivetape. 5.5 Standardfuel ,comprisingamixtureof70(Vol%)isooctaneand30(Vol%)industrialgradetolueneshall beusedaccordingtoprEN138802. 5.6 Waterbath ,havingacapacityofatleast10lwithaperforatedshelfnotlessthan50mmfromthebottomof thebathandcapableofmaintainingthespecimenandassemblyattherequiredtesttempe

29、raturesof(50 1)Cor (35 1)CaccordingtoprEN141881. 5.7 Electricfan ,industrialelectricfanwithadiameterof300m,capableforastreamofairhavinganaverage velocityof(120 30)m/min. 5.8 Adhesivetape.EN138808:2003(E) 5 6 Preparationandconditioningoftestspecimens 6.1 PreparethetestsampleaccordingtoprEN138806 6.2

30、Pourthetestsampleintothemetalcontainertakingcaretoavoidanycontamination.Recordtheactual temperatureattheendofpouring. 6.3 Immediatelyafterfilling,looselycoverthetestmetalcontaineranditscontentswithalippedbeakerof suitablesizeasaprotectionagainstdustandtoassistintheeliminationofairbubbles.Allowthetes

31、tspecimensto coolinairatatemperatureof(23 2)Cforaperiodof(1,75 0,25)h. 6.4 Placethetestspecimensinsidethesmallcontainer,addingtherequiredvolumeofreferencefuel,sealing thecontainerwithadhesivetape.Transferthetestassemblytotheconstanttemperaturewaterbathandfollowthe testprocedure. 6.5 Foreachtest,thre

32、etestspecimensshallbeprepared. 7Procedure 7.1 Weighthetestspecimentothenearest0,01gandnotetheinitialweight IW. 7.2 Placethetestspecimeninthesmallcontainerandpourinstandardtestfueltoadepthof100mm,sealing thelidwiththeadhesivetape. 7.3 Placethesealedcontainerinawaterbathataconstanttemperatureof(50 1)C

33、or(35 1)Cforaperiod of(24 1)h. 7.4 Afterremovingthetestspecimensfromthefuel,drythetestspecimeninastreamofairusinganelectricfan. 7.5 Weighthetestspecimenafterdryingandrecordasthefinalmass FW. 8 Calculationandexpressionofresults Calculatethechangeinmass Cfromtheequation: 100 IW FW IW C (1) where C ist

34、hechangeinmass,inpercent(%); IW istheinitialmass,ingrams(g); FW isthefinalmass,ingrams(g). Theresultistheaverageofthethreetestspecimens.Repeatthetest,whenthechangeinmassdiffersbetween thethreetestspecimensmorethan 0,3(%inmass). 9Precision Estimateoftherepeatabilityandreproducibilityofthistestmethoda

35、ndofthevariabilityduetosamplingarenotyet availablebutwillbeincludedbyamendmentwhenknown.EN138808:2003(E) 6 10 Testreport ThetestreportshallconfirmthatthetestwascarriedoutinaccordancewiththisEuropeanStandardandshall includethefollowinginformation: a) nameofsample; b) sourceofsample; c) batchnumberand

36、dateofmanufacturewhereappropriateorexpirydate; d) dateoftestingandresultsobtained; e) nameoftheanalystandtestlaboratory.blankBS EN 13880-8:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards.

37、 It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant a

38、im of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44

39、 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed t

40、o Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as B

41、ritish Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give

42、 details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details

43、 of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available o

44、n the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electro