EN 12324-2-1999 en Irrigation Techniques - Reel Machine Systems - Part 2 Specifications of Polyethylene Tubes for Reel Machines《灌溉技术 轮机系统 第2部分 灌溉机压缩聚乙烯管规范》.pdf

《EN 12324-2-1999 en Irrigation Techniques - Reel Machine Systems - Part 2 Specifications of Polyethylene Tubes for Reel Machines《灌溉技术 轮机系统 第2部分 灌溉机压缩聚乙烯管规范》.pdf》由会员分享，可在线阅读，更多相关《EN 12324-2-1999 en Irrigation Techniques - Reel Machine Systems - Part 2 Specifications of Polyethylene Tubes for Reel Machines《灌溉技术 轮机系统 第2部分 灌溉机压缩聚乙烯管规范》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、STDeBSI BS EN L2324-2-ENGL 1999 Lb24bb9 0812894 010 BRITISH STANDARD Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines The European Standard EN 123242:1999 has the status of a British Standard ICs 23.040.20; 65.060.35 BS EN 123242:1999 NO C

2、OPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW STD-BSI BS EN 12324-2-ENGL 3977 9 3b24bb9 0832895 T57 direction of the Engineering Amd.No. Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 November 1999 O BSI 11-1999 BS EN 1

3、2324-2:1999 Date Comments National foreword This British Standard is the English language version of EN 123242: 1999. The UK participation in its preparation was enhted to Technical Committee AGE/30, Irrigation and drainage equipment, which has the responsibility to: - aid enquirers to understand th

4、e text; - present to the responsible European committee any enquiries on the - monitor related international and European developments and promulgate interpretation, or proposais for change, and keep the UK interests informed them in the UK A ist of organizations represented on this committee can be

5、 obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled ”Inkrnational Standards Correspondence Index”, or by using the “Fin

6、d” faciity of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal

7、obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 11 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. ISBN O 580 35368 O EUROPEAN STANDARD NORME EUROPENNE EUROPIS

8、CHE NORM EN 12324-2 August 1999 ICs 23.040.20: 65.060.35 English version Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines Techniques dimgation - Installations avec enrouleurs - Patie 2: Spcifications des tubes polythylne pour enrouleurs Be

9、wsserungsverahren - Beregnungsmaschinen mit Regnereinzug - Teil 2: Festlegungen fr Poiyethylenrohre fr Beregnungsmaschinen mit Regnereinzug This European Standard was approved by CEN on 8 July 1999. CEN members are bound to comply wlh the CEWCENELEC Internal Regulations which stipulate the condition

10、s for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three offi

11、cial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its awn language and notified to the Central Secretariat has the same status as theofficial versions. CEN members are the national standards bodies of Austria, B

12、elgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Central Cecretar

13、lat: rue de Stassart, 36 B-1050 Brussels Q 1999 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12324-2:1999 E Page 2 EN 12324-211 999 Contents Foreword . 3 1 scope . 4 2 Normative references . 4 3 Terms and definitions 5 4 Specifi

14、cations for the material of the polyethylene tubes . 5 4.1 General . 5 4.2 Characteristics . 5 4.3 Classification and designation 6 4.4 Overall service (design) coefficient and design stress . 7 4.5 Reprocessable materials 7 5 General characteristics for pipes . 7 5.1 Visual inspection 7 5.2 Colour

15、. 7 5.3 Geometrical characteristics 7 5.4 Length 7 5.5 Mechanical characteristics . 9 6 Selection of the series number according to the length . -9 7 Calculation of the reference mass per unit length 9 8 Internal diameter of coils for transportation 10 9 Marking 10 9.1 Contents of the marking . 10 9

16、.2 Spacing between the markings 10 9.3 Example of marking for 1 m spacing between the markings . 11 BSI 11-1999 STDeBSI BS EN 12324-2-ENGL 3999 m Lb2ribbS 0832898 7bb W Page 3 EN 12324-211 999 Foreword This European Standard has been prepared by Technical Committee CENTTC 334, Irrigation techniques,

17、 the Secretariat of which is held by AFNOR. Within its programme of work, Technical Committee CEWC 334, Irrigation techniques, charged CEWC 3WG 1, Reel Machine Systems, to prepare the following standard: EN 12324-2, Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylen

18、e tubes for reel machines. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2000, and conflicting national standards shall be withdrawn at the latest by February 2000. According to the CEN

19、ICENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden

20、, Switzerland and the United Kingdom. The other standards concerning the irrigation techniques are: - EN 12324-1, Irrigation techniques - Reel machine systems - Part I: Size series; - - EN 12324-3, Irrigation techniques - Reel machine systems - Part 3: Presentation of technical charactetistk; EN 123

21、24-4, Irration techniques - Reel machine systems - Part 4: Guidance documents for the users; - prEN IS0 8224-1, Traveller irrigation machines - Part I: Laboratory and field test methods. OBSI 11-1999 Page 4 EN 12324-211 999 1 scope This European Standard specifies the characteristics that are requir

22、ed for the polyethylene (PE) tubes for irrigation reel machines. Those tubes are destined to be coiled onto structures of reel machines that conform to the size series specified in EN 12324-1, and to achieve the functions of carrying water and dragging the water emitting system, while it travels alo

23、ng the irrigated lane. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent

24、amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. prEN 496, Plastics piping systems - Plastics pipes and fittings - Measureme

25、nt of dimensions and visual inspection of surfaces. EN 638, Plastics piping and ducting systems - Thermoplastics pipes - Determination of tensile properties. EN 728, Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time. EN 921 , Plastics pip

26、ing systems - Thermoplastics pipes - Determination of resistance to internal pressure at constant temperature. EN 1401 -1 :1998, Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly (vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and t

27、he system. prEN 1555-1, Plastics piping systems for gaseous fuels supply - Polyethylene (PE) - Part I: General. prEN IS0 9080, Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation. EN 1 2099, Plastics pipi

28、ng systems - Polyethylene piping materials and components - Determination of volatile content. EN 121 18, Plastics piping systems - Determination of moisture content in thermoplastics by coulometry. EN IS0 121 62, Thermoplastics materials for pipes and fittings for pressure applications - Classifica

29、tion and designation - Overall service (design) coefficient (IS0 12762:1995). EN 12324-1 :1998, Irrigation techniques - Reel machine systems - Part 1: Size series. EN IS0 13479, Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow cr

30、ack growth on notched pipes (notch test) (IS0 13479:1997). IS0 11 33:1997, Plastics - Determination of the melt mass - flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics. IS0 1 183:1987, Plastics - Methods for determining the density and relative density of non-cellular plastics.

31、IS0 1872-1, Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications. IS0 6964:1986, Polyolefin pipes and fittings - Determination of carbon black content by calcination and pyrolysis - Test method and basic specification. QBSI 11-1999 P

32、age 5 EN 12324-211 999 IS0 11420:1996, Method for ?he assessment of ?he degree of carbon black dispersion in polyolefin pipes, fittings and compounds. 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply: 3.1 reel machine see EN 12324-1 3.2 st

33、ructure (ST) see EN 12324-1 3.3 polyethylene tube one of the parts of a reel machine which connects the cart to the structure, and achieving the functions of carrying water to and dragging the system which emits the irrigation water while travelling along the irrigated lane 3.4 range of the polyethy

34、lene tubes see EN 12324-1 3.5 central diameter of the range of the polyethylene tubes see EN 12324-1 3.6 minimum length of the tube of central diameter in the range of polyethylene tubes see EN 12324-1 3.7 reference mass per unit length the rounded mass of a one metre long section of the polyethylen

35、e tubes, that is to be used for transportation and packaging purposes 4 Specifications for the material of the polyethylene tubes 4.1 General Pipes shall be manufactured from either base polymers or compound. If base polymer is used, additives necessary for manufacture and end use of pipes shall be

36、incorporated during pipe extrusion and dispersed uniformly. 4.2 Characteristics The polyethylene with its additives shall conform to the requirements given in Table 1. Q BSI 11-1999 Page 6 EN 12324-2:1999 Table 1 - Characteristics of the PE material used - Test parameters Test method Characteristic

37、Requirements Parameter Value Conventional density, as given in IS0 1872-1 ? 940 kg/m3 23 “C 1 (once per batch) Test temperature Number of test pieces e IS0 1 183:1987 Test method D tube material including Jase polymer and all dditivesl Oxidation induction time (thermal stability) * 20 min EN 728 200

38、 “C 1 (once per batch) 5 kg 190 “C 10 min 1 (once per batch) Test temperature Number of test pieces e Loading mass Test temperature Time Number of test pieces e Melt-mass flow-rate (MW Maximum deviation of k 20 % of the value given by the producer IS0 1 133:1997 Volatile content C 350 mgikg Number o

39、f test pieces e 1 (once per batch) EN 12099 EN 12118 Water content Carbon black content Number of test pieces e Shall conform to IS0 6964 1 1 (once per batch) 5 300 mgAg (2 to 2,6) Yo (by mass) IS0 6964:1986 Carbon black dispersion 2 grade 3 Preparation of test pieces Number of test pieces e Free 1

40、(once per batch) IS0 1 1420:1996 Slow crack growth for pipes (110SDR 11) No failure during test Test temperature Internal test pressure for: - PE63 - PE80 - PE100 Test period Number of test pieces e 80 “C EN IS0 13479 prEN 1555-1 0,7 MPa 0,8 MPa 0,92 MPa 165 h 1 (once a year) Conformity with these r

41、equirements shall be proved by the tube manufacturer. Test may be carried out at 210 OC providing that there is a clear correlation to the results at 200 OC: in case of dispute, the Only applicable if the requirement for volatile content is not conformed to. In case of dispute, the requirement for w

42、ater In case of dispute, the compression method for the preparation of test piece shall apply. reference temperature shall be 200 OC. content shall apply. * The indicated number of test pieces and frequency of test is a minimum. All samples shall satisfy the requirements. The number of measurements

43、per test is defined in the referenced standard. 4.3 Classification and designation PE used shall be designated by the material type (PE) and the levei of Minimum Required Strength (MRS) shall conform to Table 2 when tested in the form of a pipe. STD-BSI BS EN L232q-2-ENGL 1977 m Lb2rlbbS 081i2902 TL

44、7 6,3 8,O Page 7 EN 12324-2999 PE 63 PE 80 Table 2 - Classification and designation of PE materials Ciassifkatlon by MRS Wa) Designation I 10,o I PE 100 The material shall be evaluated according to prEN IS0 9080 (where the test pressure is applied according to EN 921) to find the Lower Confidence Li

45、mit (LCL). Using this LCL, the material shall be classified in accordance with EN IS0 12162 to determine its MRS. The conformity of the designation of the material to the classification given in Table 2 shall be demonstrated by the producer. 4.4 Overall service (design) coefficient and design stress

46、 The minimum value of the overall service (design) coefficient C for pipe shall be 1,25. The maximum value for the design stress (Q) shall be: - for PE63 5,O MPa; - for PE80 6,3 MPa; - for PE 100 8,OMPa. 4.5 Reprocessable materials For the manufacture of pipes according to this standard, new materia

47、l shall be employed. Use of own reprocessable material from the production of pressure pipes of the pipe manufacturer from the same material is admissible. External reprocessable material and recyclable materials shall not be used (see definitions in EN 1401 -1 :1 998). 5 General characteristics for

48、 pipes 5.1 Visual inspection When viewed without magnification, the internal and external surfaces of pipes shall be smooth and clean and shall have no scoring, cavities and shall be free of striae, bubbles, contraction cavities as well as other defects of homogeneousness. 5.2 Colour Pipes shall be

49、black without identification stripes. 5.3 Geometrical characteristics Dimensions shall be measured in accordance with prEN 496. Dimensions shall conform to Table 3. 5.4 Length The length of polyethylene tubes for reel machines shall be measured according to prEN 496. QBSI 11-1999 Page 8 The length of polyethylene tubes for reel machines shall conform with a tolerance of 30 %, to the specifications of Table 1 and Table 2 of EN 12324-1 :1998 EN 12324-2:1999 Table 3 - Diameter, wall thickness and mass of polyethylene tubes for reel machines according to the series num