EN 1102-2016 en Textiles and Textile Products - Burning Behaviour - Curtains and Drapes - Detailed Procedure to Determine the Flame Spread of Vertically Oriented Specimens《纺织品和纺织产品.pdf

《EN 1102-2016 en Textiles and Textile Products - Burning Behaviour - Curtains and Drapes - Detailed Procedure to Determine the Flame Spread of Vertically Oriented Specimens《纺织品和纺织产品.pdf》由会员分享，可在线阅读，更多相关《EN 1102-2016 en Textiles and Textile Products - Burning Behaviour - Curtains and Drapes - Detailed Procedure to Determine the Flame Spread of Vertically Oriented Specimens《纺织品和纺织产品.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 1102:2016Textiles and textile products Burning behaviour Curtains and drapes Detailedprocedure to determine theflame spread of verticallyoriented specimensBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 1102:2016 BRITISH STANDARDNational forewordThis Brit

2、ish Standard is the UK implementation of EN 1102:2016. Itsupersedes BS EN 1102:1996 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/66/-/8, Burning behaviour.A list of organizations represented on this committee can beobtained on request to its secr

3、etary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 89850 1ICS 13.220.40; 97.160Compliance with a British Standard

4、cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2016.Amendments issued since publicationDate Text affectedBS EN 1102:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1102 August 20

5、16 ICS 13.220.40; 97.160 Supersedes EN 1102:1995English Version Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens Textiles et produits textiles - Comportement au feu - Rideaux et tentures - Proc

6、dure dtaille pour dterminer la propagation de flamme dprouvettes disposes verticalement Textilien - Brennverhalten von Vorhngen und Gardinen - Detailliertes Verfahren zur Bestimmung der Flammenausbreitungseigenschaften vertikal angeordneter Proben This European Standard was approved by CEN on 12 Jun

7、e 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtai

8、ned on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN

9、-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,

10、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre:

11、Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1102:2016 EBS EN 1102:2016EN 1102:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4

12、4 Sampling . 4 5 Cleansing 4 6 Test specimen . 5 7 Conditioning 5 8 Test procedure . 5 8.1 Spread of flame 5 8.2 Attendant fire phenomena assessment. 5 8.3 Procedure for the evaluation of flaming debris . 5 8.4 Flame spread rate calculation 6 9 Test report . 6 BS EN 1102:2016EN 1102:2016 (E) 3 Europ

13、ean foreword This document (EN 1102:2016) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsemen

14、t, at the latest by February 2017, and conflicting national standards shall be withdrawn at the latest by February 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all

15、such patent rights. This document supersedes EN 1102:1995. The ignitability is determined using a modified EN ISO 6941. These modifications are listed in this document. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to imp

16、lement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romani

17、a, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1102:2016EN 1102:2016 (E) 4 1 Scope This European Standard specifies a procedure to determine the flame spread of textiles for curtains and drapes by testing a vertically oriented specimen in accordance with EN I

18、SO 6941. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including

19、any amendments) applies. EN ISO 6330:2012, Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) EN ISO 6941:2003, Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941:2003) ISO 3175 (all parts), Texti

20、les Professional care, dry cleaning and wet cleaning of fabrics and garments 13 Terms and definitions For the purpose of this document, the following terms and definitions apply: 3.1 attendant fire phenomena special phenomena occurring during burning such as flaming debris, darting flames, formation

21、 of sparks 3.2 flaming debris material, separating from the specimen during the test procedure, falling below the initial edge of the specimen and igniting a filter paper 4 Sampling Test samples shall be representative of the materials as used in complete curtains and drapes in accordance with the n

22、umber and the size of the test specimens required as specified in EN ISO 6941. 5 Cleansing The sample shall be submitted to the cleansing procedure given on the care label. If no cleansing procedure is prescribed the material shall be submitted to one cycle of the following standard cleansing proced

23、ures as appropriate to the fabric: wash procedure in accordance with method 4N (40 3) C of EN ISO 6330:2012 and dried in accordance with method C (flat dry) of EN ISO 6330:2012; dry cleaning procedure in accordance with ISO 3175 (all parts). If the fabric is not intended to be cleansed the test meth

24、od shall be carried out on sample and specimens as received. 1Parts 5 only the first and the third marker thread shall be used; the marker threads are spun from pure cotton with a linear density of (45 5) tex. 8.2 Attendant fire phenomena assessment The fire phenomena shall be assessed using the app

25、aratus described in EN ISO 6941 during the procedure used to determine the flame spread. 8.3 Procedure for the evaluation of flaming debris Position horizontally, below the test specimen. at a distance of 50 mm from the lower edge of the specimen, on a flat surface, a piece of at least 150 mm x 100

26、mm of filter paper with the following characteristics: area specific mass (68 6) g/m2, thickness 0,15 mm to 0,16 mm, content of alpha cellulose 95 %. Note whether the filter paper ignites or not. BS EN 1102:2016EN 1102:2016 (E) 6 8.4 Flame spread rate calculation The flame spread rate, V, (in mm/s)

27、shall be calculated using the equation: 13300ttV= where t1is the time in seconds from the start of the application of the igniting flame to the severance of the first marker thread; t3is the time in seconds from the start of the application of the igniting flame to the severance of the third marker

28、thread. 9 Test report The test report shall include the following information: a) reference to this European standard; b) identification of the fabrics tested; c) the cleansing procedure if used or a statement that the material is not intended to be cleansed; d) date of test; e) ambient conditions o

29、f temperature and relative humidity in the area in which the test is carried out; f) techniques used to attach fabrics which cannot be supported on the pins; g) orientation of the burner for igniting the test specimen, edge or surface ignition; h) the following times in seconds. for the length and t

30、he width directions and for each face tested; 1) the flame spread times(s) measured in accordance with 10.1.3 a) and c) of EN ISO 6941:2003; 2) if six specimens are tested the mean from the results of each direction for all the specimens that burn to the respective marker thread and the number of va

31、lues averaged for each direction; NOTE 1 Do not report a mean of less than three values. i) the flame spread rate in mm/s for all specimens giving severance of the third marker thread; j) if six specimens are tested, the mean from the results of all the specimens of each direction; NOTE 2 Do not rep

32、ort a mean of less than three values. k) the number of specimens that failed to ignite; l) the number of specimens which ignited but failed to burn the first marker thread; BS EN 1102:2016EN 1102:2016 (E) 7 m) the: result of the attendant fire phenomena assessment or a statement that no assessment w

33、as made; n) any deviation from this procedure. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Stand

34、ards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge

35、embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your

36、 organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards

37、, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including Br

38、itish Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you m

39、ay not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchas

40、ed in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one

41、 time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. Thi

42、s includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications conta

43、ct the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European

44、 and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a

45、BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Mu

46、lti-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British

47、 Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful Contac

48、tsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20